APC APCRBC143 Owners Manual

Page 1
Smart-UPS
su07
Installation Guide
APCRBC143
Battery Replacement
Always recycle used batteries. For information on recycling the used battery, refer to the Battery Disposal Information sheet included with the replacement battery.
Remove the UPS battery
12
su0758a
su0810b
34
Install the UPS replacement battery
12
3
59a
su0760a
b 0
6 7
0 u
s
a 0
1 8 0
u
s
b 8
5 7 0
u
s
Page 2
Remove the external battery pack (XLBP) batteries
12
su0790a
34
a 1 9 7 0
u
s
Install the external battery pack (XLBP) replacement batteries
12
b
1
1 8
0 u
s
su0792a
3
b 2
9 7 0
u
s
a b
1
1 8
0 u
s
su0790b
Smart-UPS APCRBC1432
Page 3
Reset the Battery Install Date
su0343b
Reset the Battery Instal l Date for the internal UPS battery. If the Battery Install Date screen does not appear on the display interface
within two minutes of install ing the new battery, use the arrow keys to navigate to: Main Menu > Configuration > Battery Install Date.
On the Battery Install Da te screen , use the arr ow keys to select the month, date, and year. Press option.
ENTER to make a selection then move to the next
When finished, press
ENTER to save the date.
When the RBC is fully charged, perform a self- test and run time calibration test.
Smart-UPS APCRBC143 3
Page 4
Customer support and warranty information is available at the AP C Web si te, www.apc.com.
© 2012 APC by Schneider Electric. APC, the APC logo, and Smart-UPS a re owned by Schneider Electric Indus tries S.A.S., American Power Co nversion Corporation, or their aff iliated c ompanies. A ll other trademarks are property of their respective owners.
EN 990-4653
4/2012
Loading...