Apart SPH16 User Manual [ru]

SPH16
SPHERE LOUSEAKER
Description
The Apart SPH16 is a 2-way sphere speaker with a very clear sound reproduction. It is provided with a high quality 100 Volt transformer with several power tappings. A 4.5m cable with metal safety cord is included. The best choice for spaces with high ceilings (+4m), gives a very good sound distribution. The housing is made out of ABS plastics and is moisture- and UV proof. This makes the SPH16 the most “cost-effective” sphere loudspeaker on the market, unique in its kind The standard colour is white. From 12 pieces on, the loudspeakers can optionally be painted in any other RAL colour (Ref.: SMPAINT)
Technical Specifications
• Rated Power RMS : 16 W
• Music Power RMS : 25 W
• Sound Pressure Level 5SPL) 1w/1m 92dB
• Maximum SPL : 104dB
• Frequency Range : 80 Hz - 20 KHz
• Loudspeaker impedance8 Ohm
• Transfo power taps : 4 - 8 - 16W
• Dispersion 1KHz / 180° 4KHz / 60°
• IP Rating : IP-53
• Dimensions (dia) : 180mm
• Cable length : 3m
• Weight : 1.9 Kg
Connecting the loudspeaker
The shielded wire is used for hanging the sphere loudspeaker.
• De afscherming van de kabel is nodig voor het ophangen van de luidspreker.
• La protection du câble est nécessaire pour la suspension de l’haut-parleur.
To avoid short-circuits, make sure the not in use wires aren’t touching.
• Zorg dat alle niet gebruikte geleiders elkaar niet raken, deze staan onder spanning en kunnen kortsluiting veroorzaken.
• Pour éviter des court-circuits, observez que tout les conducteurs non-utilisés ne peuvent pas se toucher. Ils sont sous tension et peuvent provoquer des court-circuits.
Power Tappings
COLOUR KLEUR COULEUR POWER IMPEDANCE
Red Rood Rouge Common
White Wit Blanc 4 Watt 2K5 Ω
Yellow Geel Jaune 8 Watt 1K2 Ω
Blue Blauw Blue 16 Watt 625 Ω
100 Volt Technology
80Watt
120Watt Amplier
=
16 16 16 8 8 8 4 4++ + + +
16WATT 16WATT 16WATT 8WATT 8WATT 8WATT 4WATT 4WATT
+
Amplier power must be higher than total power of all speakers.
Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.
La puissance de l’amplicateur doit etre plus élevée que la puissance totale des haut parleurs.
+
WWW.APART-AUDIO.COM INFO@APART-AUDIO.COM
Loading...