Page 1
MASKC BRACKETS
MASKCL-BL
MASKCV-BL
MASKCW-BL
|
MASKCL-W
|
MASKCV-W
|
MASKCW-W
MASKCL bracket has been designed
to mount MASKC loudspeakers with
CLICKMOUNT at an angle of 90° from
the wall.
MASKCV bracket has been designed
to mount 2 pieces of MASKC
loudspeakers of the same size and
weight with CLICKMOUNT from the
ceiling at a 180° angle from each other.
MASKCW bracket has been designed
to mount 4 pieces of MASKC
loudspeakers of the same size and
weight with CLICKMOUNT from the
ceiling at a 90° angle from each other.
Safety instructions
Please follow the safety instructions in this manual to obtain optimum results before use. We also recommend to keep this instruction manual
for future reference.
Install the unit only in a location that can structurally support the weight of the loudspeaker unit(s) and mounting bracket(s).
Use adequate and sufciently sturdy mounting screws, wall plugs and/or additional support accessories to ensure safe installation. Make sure
that each screw is well tightened after installation.
Doing otherwise may result in the unit(s) falling down, causing personal injury and / or property damage. Do not stand or sit on, nor hang
down from the mounted loudspeaker(s) as this may cause them to fall down or drop, resulting in personal injury and/or property damage.
These brackets are designed for indoor use only. Do not use outdoors.
Apart Audio takes no responsibility for any accidents or injuries caused by wrong installation. If necessary secure the speakers with additional
safety cables, such as our SAFCAB range of safety cables.
WWW.APART-AUDIO.COM
Loading...