
6.5" design two-way loudspeaker
white with Clickmount system
low impedance RMS power in
watts
main construction material
Vertical dispersion angle 1000
Hz
low impedance dynamic power
in watts
Horizontal dispersion angle
1000 Hz
closest RAL colour (subject to
deviations)
RAL9016 (W) / RAL9011 (BL)
The MASK6C low impedance loudspeaker has a unique
design and delivers a crystal clear sound for background
sound up to dance level music. The cabinet is made of
high quality enforced PP4 ABS, with an aluminium grill.
The design of the MASK6C ensures high quality and long
lasting performance in indoor and outdoor use, even
under extreme weather conditions. The MASK6C has a
powerful 6.5” coated paper cone woofer and a 1” silk
dome tweeter which results in a high SPL and extremely
low distortion.
This ensures an unprecedented clarity over the whole
frequency spectrum. The built-in Apart 3-step protection
and the high-quality components make the MASK6C an
ultra- reliable, fail safe loudspeaker even at high power
loads. Thanks to the revolutionary design of the ClickMount
bracket, the MASK6C is without a doubt the fastest and
most installer friendly loudspeaker to-date. The pre-defined
clicks on the ClickMount ensure a perfect alignment for
every loudspeaker. With the discrete cable management
system, integrated spirit level and in/out connectors, the
full cabling is done on the bracket. To complete the
installation simply click the loudspeaker on the ClickMount!
www.apart-audio.com | info@apart-audio.com

www.apart-audio.com | info@apart-audio.com

www.apart-audio.com | info@apart-audio.com

www.apart-audio.com | info@apart-audio.com

V-shaped 2-way cluster bracket for MASK4C(T)-W/MASK6C(T)
-W
Double V-shaped cluster bracket for MASK4C(T)-W/MASK6C
(T)-W
L-shaped side bracket for MASK4C(T)-W / MASK6C(T)-W
www.apart-audio.com | info@apart-audio.com