MASK6CT-BL
6.5" design two-way loudspeaker
black with Clickmount system
TECHNICAL SPECIFICATIONS
height in mm
328
depth in mm
190
woofer size in inch
6,5
tweeter size in inch
1
100V transformer power taps in
watts
60 - 30 - 15 - 6
impedance (ohms)
16
low impedance RMS power in
watts
150
max SPL 1m in dB
110
main construction material
ABS plastic
IP rating
64
Vertical dispersion angle 1000
Hz
180°
Net weight product (kg)
3.9
width in mm
198
loudspeaker system
2-way
woofer cone material
coated paper
mounting system
clickmount
70V transformer power taps in
watts
60 - 30 - 15 - 7.5 - 3
low impedance dynamic power
in watts
200
SPL 1W/1m in dB
90
frequency response in Hz
65 - 20k
grille main material
aluminium
Horizontal dispersion angle
1000 Hz
180°
closest RAL colour (subject to
deviations)
RAL9016 (W) / RAL9011 (BL)
The MASK6CT has a unique design and delivers a crystal
clear sound for all your public address and background
music applications. The MASK6CT can be used as a
70V/100V speaker with power tapping on 60 - 30 - 15 - 6
watts in 100V or as a low impedance 16 Ohm speaker.
This results in a versatile speaker that can be used in any
location and any application. The cabinet is made of high
quality enforced PP4 ABS, with an aluminium grill. The
design of the MASK6C ensures high quality and long
lasting performance in indoor and outdoor use, even
under extreme weather conditions. The MASK6CT has a
powerful 6.5” coated paper cone woofer and a 1” silk
dome tweeter which results in a high SPL and extremely
low distortion.
This ensures an unprecedented clarity over the whole
frequency spectrum. The built-in Apart 3-step protection
and the high-quality components make the MASK6CT an
ultra- reliable, fail safe loudspeaker even at high power
loads. Thanks to the revolutionary design of the ClickMount
bracket, the MASK6CT is without a doubt the fastest and
most installer friendly loudspeaker to-date. The pre-defined
clicks on the ClickMount ensure a perfect alignment for
every loudspeaker. With the discrete cable management
system, integrated spirit level and in/out connectors, the
full cabling is done on the bracket. To complete the
installation simply click the loudspeaker on the ClickMount!
www.apart-audio.com | info@apart-audio.com
MASK6CT-BL
POLAR PLOTS
www.apart-audio.com | info@apart-audio.com
MASK6CT-BL
MORE PICTURES
www.apart-audio.com | info@apart-audio.com
MASK6CT-BL
www.apart-audio.com | info@apart-audio.com
MASK6CT-BL
ACCESSORIES
MASKCV-BL
V-shaped 2-way cluster bracket for MASK4C(T)-BL/MASK6C
(T)-BL
MASKCW-BL
Double V-shaped cluster bracket for MASK4C(T)-BL/MASK6C
(T)-B
MASKCL-BL
L-shaped side bracket for MASK4C(T)-BL / MASK6C(T)-BL
www.apart-audio.com | info@apart-audio.com
MASK6CT-BL
Loading...