Apart MASK4CT-W User Manual

MASK4CT-W

4.25" design two-way loudspeaker
with Clickmount system

TECHNICAL SPECIFICATIONS

height in mm

238

depth in mm

144

woofer size in inch

4,25

tweeter size in inch

1

colour

black / white

70V transformer power taps in
watts

20 - 10 - 5 - 2.5 - 1.25

low impedance dynamic power
in watts

70

SPL 1W/1m in dB

89

frequency response in Hz

80 - 20k

grille main material

aluminium

Horizontal dispersion angle
1000 Hz

180°

closest RAL colour (subject to
deviations)

RAL9016 (W) / RAL9011 (BL)

width in mm

144

loudspeaker system

2-way

woofer cone material

coated paper

mounting system

clickmount

100V transformer power taps in
watts

20 - 10 - 5 - 2.5

impedance (ohms)

16

low impedance RMS power in
watts

50

max SPL 1m in dB

104

main construction material

ABS plastic

IP rating

64

Vertical dispersion angle 1000
Hz

180°

Net weight product (kg)

1.85

The MASK4CT has a unique design and delivers a crystal
clear sound for all music applications. The MASK4CT can
be used as a 70V/100V speaker with power tapping on 20

- 10 - 5 - 2.5 watts in 100V or as a low impedance 16 Ohm
speaker. This results in a versatile speaker that can be
used in any location and any application. The cabinet is
made of high quality enforced PP4 ABS, with an
aluminium grill. The design of the MASK4CT ensures high
quality and long lasting performance in indoor and
outdoor use, even under extreme weather conditions.
The MASK4CT has a powerful 4.25” coated paper cone
woofer and a 1” silk dome tweeter which results in a high
SPL and extremely low distortion.

This ensures an unprecedented clarity over the whole
frequency spectrum. The built-in Apart 3-step protection
and the high-quality components make the MASK4CT an
ultra- reliable, fail safe loudspeaker even at high power
loads. Thanks to the revolutionary design of the ClickMount
bracket, the MASK4CT is without a doubt the fastest and
most installer friendly loudspeaker to-date. The pre-defined
clicks on the Clickmount ensure a perfect alignment for
every loudspeaker. With the discrete cable management
system, integrated spirit level and in/out connectors, the
full cabling is done on the bracket. To complete the
installation simply click the loudspeaker on the ClickMount!

www.apart-audio.com | [e-mail]

MASK4CT-W

POLAR PLOTS

www.apart-audio.com | [e-mail]

MASK4CT-W

MORE PICTURES

www.apart-audio.com | [e-mail]

MASK4CT-W

www.apart-audio.com | [e-mail]

MASK4CT-W

ACCESSORIES

MASKCV-W

V-shaped 2-way cluster bracket for MASK4C(T)-W/MASK6C(T)

-W

MASKCW-W

Double V-shaped cluster bracket for MASK4C(T)-W/MASK6C

(T)-W

MASKCL-W

L-shaped side bracket for MASK4C(T)-W / MASK6C(T)-W

www.apart-audio.com | [e-mail]

MASK4CT-W