APART H20-G Apart H20-G.pdf

COMPRESSION DRIVER HORN SPEAKER

SETTING POWER IMPEDANCE

1 2.5 WATTS 4K Ω

2 5 WATTS 2K Ω

3 10 WATTS 1K Ω

4 20 WATTS 500 Ω

5 OFF OFF

6 20 WATTS 8 Ω

H20

WWW.APART-AUDIO.COM [e-mail]

●Type : Compression driver horn speaker

● Material : high impact ABS

● Standard colour : gray RAL7035

● Rated power RMS : 20 W / 100 volt

● Music power RMS : 30 W / 100 volt

● Transformer power taps by rotary switch :

2.5 – 5 – 10 – 20 W / 100volt

● Rated power RMS : 20 W / 8 ohm

● Music power RMS : 30 W / 8 ohm (lo-cut)

● Impedance: 100 volt / 8 ohm

● Cable length : approx. 40 cm

● Dimensions Outside Ø : 200 mm x length : 232 mm

● Weight including bracket : 1.36 Kg

● Mounting holes : 3 x Ø 6.5 mm

Technical Specifications

The H20 is a powerfull weatherproof industrial horn loudspeaker with compression driver.
This hornspeaker offers you a high sound pressure ideally suited for speech and the repro­duction of alarm signals. Ideal for long-distance and outdoor use. The H20 is made out of high
impact ABS, supplied with a stainless steel bracket to avoid corrosion. The loudspeaker is
equipped with a high quality 100 volt transformer with several power taps, and can be used

in 8 ohm systems as well. The APart technology avoids any overload of your amplier by

controlling the impedance with the unique IMC protection device inside.

Power Tappings

20

20

10 10 5 5 2.5 2.5

+

+

+ + + + +75 Watt =

120Watt Amplier

Amplier power must be higher than total power of all speakers.

Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.

La puissance de l’amplicateur doit etre plus élevée que la puissance totale des haut parleurs.

100 Volt Technology

Mounting the loudspeaker

A stainless steel mounting bracket for mounting is included in the packing. The bracket allows you to rotate the speaker
over a range of more than 180 degrees. Securely mount the bracket to a wall or other solid surface. Connect the
speaker line with the included speaker wire and make sure that all connections are weather proof. The desired power
can be selected with the rotary switch at the back of the unit.

H20-G_Manual.indd 1 11/5/08 11:28:50 AM