
70V transformer power taps in
watts
low impedance dynamic power
in watts
main construction material
100V transformer power taps in
watts
Vertical dispersion angle 1000
Hz
Apart CM6T is a two-way low impedance or 100 volt
loudspeaker suitable for the distribution of microphone
calls and background music. In 16 ohms use, you can
connect up to 4 loudspeakers in parallel on each channel
of a standard 4 ohms amplifier.
For 100 volt use, the CM6T is equipped with a highquality 6 watt 100 volt transformer with several power
tappings (6 - 3 – 1.5 watts).
CM6T is easy to install, due to its simple quick mounting
system with only 3 screws.
This loudspeaker is now updated with a new Quick Fix
connector and transformer tapping sticker for an even
faster and easier installation.
Versatile for almost every market around the globe due
to the addition of the 70 / 100 volt connection, the CM
series is bound to stay the standard installer’s choice in
the fixed install market.
The complete redesign of the CM Series is done according
to the corporate Apart identity. Apart blue speaker clamps
and product sticker, an Apart marked transformer and
loudspeaker basket.
The housing is made of high quality ABS. The 6 ½” woofer is
made of special enforced polypropylene what results in a
very low distortion. To complete the sound, a quality 1”
tweeter has been integrated. The grille is made of
aluminium what makes CM6T humidity proof and suited for
bathrooms, kitchens...
The CM6T loudspeakers can be painted in any colour.
www.apart-audio.com | info@apart-audio.com

www.apart-audio.com | info@apart-audio.com

On-wall box for CM- and CM-Deesign loudspeaker range
www.apart-audio.com | info@apart-audio.com