ASUS BX700 Bluetooth Laser Mouse User’s Guide
GENERAL SPECIFICATIONS
n 5 Buttons Bluetooth laser mouse.
n 1,200 dpi hardware resolution.
n Low power indicator.
n Power ON/OFF switch.
n Ergonomic and enlarge buttons design for comfortable grip.
n 2 AAA batteries to operate the mouse.
n Dimension: 105.6*57.7*36.2 (L*W*H,mm)
n Weight: 62±5gm (without batteries)
System Requirement
Ÿ Laptop or PC with Bluetooth technology
Ÿ Windows 7, Vista, XP, 2000, MAC 10.1 above
Before you begin
Ÿ Keep this installation guide for future reference! It contains Important Troubleshooting
Information.
Ÿ Keep your old PS/2 mouse as a back-up device.
Getting Started
This BX700 features a 1200dpi tracking resolution and an ergonomic 5-button operation.
Please read this manual thoroughly and follow the instruction procedures to prevent from any
equipment damage or personal injury.
Function:
Button #3 – Centre scroll
Button#2–Right mouse
Low power
Package Contains
Your BX700 Bluetooth Mouse package includes the following:
1. Bluetooth Laser Mouse
2. User’s manual
3. 2 AAA size of Alkaline batteries
*** If any part is missing, please contact your dealer for a replacement Immediately.***
Precaution
! The BX700 cannot work on a glass or mirror surface. Avoid operating this mouse
on a glossy surface. Otherwise, this mouse may not operate normally.
! For consideration of saving battery power, it is strongly recommended to operate
BX700 on a bright surface with fine texture to obtain lower power consumption.
A very dark surface will cause higher power consumption.
! For a better transmission distance, avoid using this device on a metal plate or
desktop because a large surface of iron, aluminum, operating on a metal may
cause the transmission distance shorter.
! While the mouse is functioning, no laser light is visible to the naked eye. Be
careful not to look directly into the emitter hole while the mouse is active.
Installation Guide
Step 1. Inserting the Batteries
I. Remove the battery compartment cover.
II. Install batteries with the positive (+) & negative (-) in the correct direction
indicated by the battery compartment label.
III. Replace battery compartment cover.
Note: Please see the bottom of this mouse, the sliding-switch must be put on the “ON”
position.
Step 2. Connecting the BX700 to the available Bluetooth-enabled PC or
Laptop