MOBILE HOME
COMMERCIAL-GRADE
RESIDENTIAL ELECTRIC WATER HEATERS
APPROVED FOR MANUFACTURED
HOUSING
• All residential electric water heaters
are compliant with HUD standards for
mobile homes/manufactured housing.
SIDE WATER CONNECTIONS
• For ease of installation in mobile home
applications.
COREGARD™ ANODE ROD
• Our anode rods have a stainless steel
core that extends the life of the anode
rod allowing superior tank protection far
longer than standard anode rods.
LONG-LASTING HEATING ELEMENTS
• Screw-in, direct immersion,
3500W/240V or 3000W/120V heating
elements for maximum efficiency.
BLUE DIAMOND® GLASS COATING
• Provides superior corrosion resistance
compared to industry standard glass
lining.
ENHANCED-FLOW BRASS DRAIN
VALVE
• Our residential water heaters have a
solid brass, tamper resistant, enhancedflow, ball type, drain valve.
• Uses a standard female hose fitting that
allows for fast and easy draining during
maintenance.
• Designed for easy operation, this valve
includes an integral screwdriver slot that
features a ¼ turn (open/close) radius,
which not only permits full straightthrough water flow but also a quick and
positive shut off.
CODE COMPLIANCE
• Meets UBC, CEC and HUD National
Codes.
• Meets the thermal efficiency and
standby loss requirements of the U.
S. Department of Energy and current
edition of ASHRAE/IESNA 90.1.
• Complies with the Federal Energy
Conservation Standards effective April
16, 2015, in accordance with the
Energy Policy and Conservation Act
(EPCA), as amended.
CERTIFIED TO UL 174 FOR
HOUSEHOLD ELECTRIC WATER
HEATERS
CSA CERTIFIED AND ASME RATED
T&P RELIEF VALVE
DESIGN-LISTED BY UNDERWRITERS
LABORATORIES
• Certified at 300 PSI test pressure and
150 PSI working pressures.
• Listed according to UL 174 standards
governing storage tank-type electric
water heaters.
6-YEAR LIMITED TANK AND PARTS
WARRANTY
• For complete information, consult
written warranty or go to
hotwater.com.
©2018 A.O. Smith Corporation. All Rights Reserved
www.hotwater.com | 800-527-1953 Toll-Free USA | A.O.Smith Corporation | 500 Tennessee Waltz Parkway | Ashland City, TN 37015
Page 1 of 2
AOSRE50800
COMMERCIAL-GRADE
RESIDENTIAL ELECTRIC WATER HEATERS
Wattage Dimensions in Inches
Upper
Element
Lower
Element
Height to Top
of Heater
Diameter
Weight (lbs)
Model Number
MHE6-30H-030D 30 27 50 0.90 14 120 3000 3000 46-3/4 19 98
MHE6-30H-035D 30 27 50 0.90 16 240 3500 3500 46-3/4 19 98
MHE6-30H-045D 30 27 50 0.90 21 240 4500 4500 46-3/4 19 98
MHE6-40R-030DW 40 36 40 0.91 14 120 3000 3000 50 22 109
MHE6-40R-035DW 40 36 40 0.91 16 240 3500 3500 50 22 109
MHE6-40R-045D 40 36 54 0.95 21 240 4500 4500 50 22 109
MHE6-30L-030D*
MHE6-30L-035D* 28 26 47 0.90 16 240 3500 3500 30 22 96
MHE6-30L-045D* 28 26 47 0.90 21 240 4500 4500 30 22 96
*Models ship with supplied insulation blanket
MHE6 models may have limited element options due to element size or other restrictions.
¾” water connections. Available with side T&P only.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Nominal
Capacity
28 26 47 0.90 14 120 3000 3000 30 22 96
Rated
Storage
Volume
First Hour
Rating
(Gallons)
UEF
Recovery @
90°F Rise
Gallon
Per Hour
Voltage
Approx.
Shipping
T&P VALVE
OUTLET
ANODE
AB CC
E
INLET
DRAIN
VALVE
WATER CONNECTIONS
JUNCTION
BOX
T&P VALVE
D
For technical information call 800-527-1953. A. O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
www.hotwater.com | 800-527-1953 Toll-Free USA
Page 2 of 2
AOSRE50800