A.O. Smith GCV-65, GCV-65 LP, GCVT-40, GCVT-40 LP, GCVT-50 LP Technical Documents

...
Residential Gas Water Heaters
FEATURES
HIGHEST RECOVERIES AND FIRST HOUR RATINGS
Capacity/input combinations up to 98 gallons/75,100 BTUs for recoveries up
DYNACLEAN™ DIFFUSER DIP TUBE
Helps reduce lime and sediment buildup, maximizes hot water output. Made from
long lasting PEX cross-linked polymer.
COREGARD™ ANODE ROD
A.O. Smith’s exlusive anode has a stainless steel core, protects tank against corrosion.
HEAT TRAP NIPPLES
Factory-installed on most models.
PUSH-BUTTON PIEZO IGNITOR
Makes lighting pilot fast and easy with one-hand push-button spark ignition.
DURABLE, TAMPER-RESISTANT BRASS DRAIN VALVE
BLUE DIAMOND
Provides superior corrosion resistance compared to industry-standard glass lining.
THICK, “ENVIRONMENTALLY-FRIENDLY” NON CFC-FOAM INSULATION
Improves efficiency.
CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE
Top-mounted T&P relief valve available as option.
®
GLASS COATING
®
DESIGN-CERTIFIED BY CSA INTERNATIONAL
According to ANSI Z21.10.1 - CSA 4.1 standards governing storage-type water heaters.
FLAMMABLE VAPOUR IGNITION RESISTANT COMPLIANT DESIGN
See other side.
8-YEAR LIMITED TANK AND 6-YEAR PARTS WARRANTY
For complete information, consult written warranty or A. O. Smith Water Products Company.
August 2013
CANRG45400_Promax_High Recovery_Spec_Sheet_v01.indd 1 9/6/2013 1:15:20 PM
SERIES 100/101
Page 1 of 2
CANRG45400
CAPACITY & DIMENSIONS
HOT CONNECTION
N
D*
Residential Gas Water Heaters
FIRST
MODEL SERIES
GCVT 40 300 75 40 51 0.60 50,000 16 61-3/4 58-1/4 20 13-1/4 8 51-3/4 4 138
GCVT 50 300 90 48 51 0.58 50,000 8 60-7/8 56-1/2 20 13-3/8 8 50-3/8 4 172
GVRT 60 100 104 60 53 0.58 52,200 16 62-3/4 59 24 13 8 51 1/2 4 205
GCVT 60 100 104 60 53 0.56 52,200 16 62-3/4 59 22 13 8 51 1/2 4 192
GCV 65 100 116 65 67 0.57 65,000 16 65 60 24 15-1/2 8 54-1/4 4 215
FCG 75* 300 N/A 74 81 N/A 75,100 16 61 57 26-1/2 14-3/4 16 50-1/4 4 275
Recovery capacity based on actual performance tests. Water Connections – 1” on 75-gallon model and 3⁄4” on all other models. * Not equipped with FVIR Technology. 75 gallon models have factory-installed (non-heat trap) nipples, 75-gallon model has 80% efficiency, 998 BTU/hr. standby loss. † Propane Gas – GCVT-40: 45,000 BTU input; GCVT-50: 45,000 BTU input; GCV-65: 62,500 BTU input. The FVIR Series 100 models are certified from sea level to 7,700 ft. elevations. The FVIR Series 300 models are certified from sea level to 10,100 ft. elevations. The 75 gallon model are certified to 7,700 ft. elevations.
HOUR
RATING
(GPH)
GALLON
CAPACITY
RECOVERY
90°F RISE
PER HOUR
ENERGY FACTOR
BTU INPUT PER HOUR NATURAL†
R
VALUE
DIMENSIONS (INCHES)
A B C D E F
DRAFT
HOOD
OUTLET
APPROX.
SHIPPING
WEIGHT
(LBS)
ANODE RO
COMPLIANT
Flammable Vapour Ignition Resistant FVIR Water Heaters
FVIR design meets American National Standards Institute standards (ANSI Z21.10.1 -
4.1 CSA Standards) that deal with the accidental or unintended ignition of flammable vapours, such as those emitted by gasoline.
FVIR gas water heaters feature a sealed combustion chamber with air intake screen and a fireproof Corderite flame arrestor built into the water heater base. In addition, a thermal cutoff (TCO) device, integral with the thermocouple, is designed to shut off gas flow to the burner and pilot if poor combustion is detected.
If flammable vapours accidentally enter the combustion chamber, the Corderite flame arrestor is designed so flames burn off the top surface and cannot escape down through the arrestor.
T&P VALV E
1/2" GAS CONNECTION
E
C
COLD CONNECTIO
B
F
A
BC
D
A. Easy-to-light piezo ignitor
B. View port for easy burner inspection inside sealed combustion chamber
For Technical Information, call 1-888-479-8324. A. O. Smith reserves the right to make product changes or improvements without prior notice.
August 2013
www.hotwatercanada.ca
CANRG45400_Promax_High Recovery_Spec_Sheet_v01.indd 2 9/6/2013 1:15:21 PM
CANRG45400
Page 2 of 2
Loading...