Easy Installation Guide
EX915
UX915G
Back Panel
Optical Devices
Front Audio
AC'97 CODEC
JP4 & JP5
AUX_IN Jumper
S/PDIF OUT
AUX_IN
CD_IN
PCI Express X 16
PCI Slot
Front USB
IEEE 1394 x 2
JP28 KB/MS
Wake_up Jumper
Printer Connector
FDD Connector
4-pin
ATX Power
SYSFAN2
USB 2.0 Ports
Socket T LGA775
supports Intel R
Prescott & Tejas CPU
Intel 915
Chipset + ICH6
1 Connect purple connector
of the keyboard to the purple
plug in the back panel. Also
connect green connector of the
mouse to the green plug in the
back panel.
S/PDIF OUT Port
Speaker Jack
Microphone Jack
Optical Devices
Eject Button
Floppy Disk Drive
/ Card Reader
Power Button
HDD Indicator
IEEE1394 Port (4 pin)
8 Connect the other end
of the power cord to the
wall AC outlet, and press
the power button to boot
up your system.
JP14
CMOS Jumper
Serial ATA
Ports X 4
Front Panel
Connector
CPUFAN1
Dual Channel
DDR400/333
DIMM x 2
Max. 2 GB
EPS ATX Power
IDE Connector
x 1 (ATA33/66
/100)
2 Connect the monitor
video cable to the blue
monitor connector located on
the back panel.
USB 2.0 Ports
Coaxial Out RCA Port
COM1 Port
Parallel Port
PS/2 Mouse Connector
PS/2 Keyboard Connector
IEEE1394 Port (6 pin)
Voltage selector switch
(115/230V)
Power Supply Switch
Power Connector
IEEE1394 Port (6 pin)
Ethernet Network
Connector (RJ45)
Line-In Jack (SUR)
Line-Out Jack (L/R)
Microphone Jack (C/B)
7 Connect the
power cord to the
power connector and
adjust the voltage as
shown.
Cooler InstallationCooler Installation
1 Put CPU cooler firmly onto
the CPU retention module.
2 Connect the Fan cable onto
the CPU FAN connector onboard.
CPU Frequency TableCPU Frequency Table
Processor Number
5 Series
560
550
540
530
520
3 Series
350
345
Processor Frequency FSB
3.60GHz
3.40GHz
3.20GHz
3.00GHz
2.80GHz
3.20GHz
3.06GHz
800MHz
800MHz
800MHz
800MHz
800MHz
533MHz
533MHz
Ratio
18 x
17 x
16 x
15 x
14 x
24 x
23 x
Cache
1MB L2
1MB L2
1MB L2
1MB L2
1MB L2
256K L2
256K L2
3 Plug the RJ45 cable to
the Network jack marked
with three tiny computers.
Monitor Connector
4 Connect the audio
cable of the speakers to
the light blue speaker jack
in the back panel. And
insert the power plug of
the speakers into the wall
AC outlet.
5 Connect the
mic jack of the
microphone to the
pink microphone
jack on the back
panel.
USB 2.0 Ports
S/PDIF IN Port
6 Depending of the type of
printer that you have, connect
the printer cable to the Blue
color parallel port as shown.
3 Push the iron plate up a bit.
4 Press the black plastic plate
downward till you hear a "clip"
sound.
340
335
Note: With CPU changing rapidly, there might be fastest CPU on
the market by the you received this installation guide. This table
is kindly for your references only.
2.93GHz
2.80GHz
533MHz
533MHz
22 x
21 x
256K L2
256K L2
To learn more about AOpen XC Cube, visit us at http://xc.aopen.com.tw; http://www.aopen.com P/N:49.EZ102.213 Doc.no:EX915-EG-E0404A
To learn more about AOpen XC Cube, visit us at http://xc.aopen.com.tw; http://www.aopen.com P/N:49.EZ102.213 Doc.no:EX915-EG-E0404A
Loading...