Aopen MR.JT511.001 User Manual
Owner’s Manual
☞ The manual is subject to change without any prior notice.
OSD options and pictures shown in this document may
differ slightly from your product.
Please read the instructions carefully before using the
product and keep safely for future reference.
English
Important Safety Instructions
Read and understand all instructions before you use this device.
Do not change any settings that are not described in this manual.
If physical injury, loss of data, or damage is caused by failure to follow
instructions, the warranty does not apply.
☞ Setup
• To reduce the risk of fire and/or electric shock, do not expose the
device to rain or moisture, or objects filled with liquids, such as vases,
should not be placed on the device.
• Do not place the device in areas susceptible to excessive dust and dirt
or near any appliance generating a strong magnetic field.
• To prevent overheating, do not block or clog the ventilation openings.
• Never place the device in a confined space. Always leave enough
space around the device for ventilation.
• Protect the device against direct sunlight heat, large temperature
fluctuations, and moisture.
• When the device runs for a long period of time and the surface
becomes hot, shut it down and unplug the power cord. Resume
operation only after the device has cooled.
• Always handle the device with care. Avoid touching the lens.
• Never place heavy or sharp objects on the device or the power cord.
• To avoid electric shock, do not disassemble.
• Only use attachments or accessories specified by the manufacturer.
• Avoid extreme vibration. It may damage the internal components.
• Do not allow children to handle the device without supervision.
☞ Under the following conditions, a layer of moisture can appear inside
the device which can lead to malfunctions;
a). If the device is moved from a cold to a warm area;
b). After a cold room is heated;
c). When the device is placed in a damp room. To avoid any moisture,
seal the device in a plastic bag before moving it to another room,
and wait for one to two hours before you take it out of the bag.
☞ Power Supply
• Power off the device before removing the power supply from the socket.
• Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from
this device.
English
• Unplug this device if there are lightning storms or when unused for a
long period of time.
• Where the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable. Before you make or change any connections, ensure that all
devices are disconnected from the power outlet.
• Never touch the power cable or the power connection with wet hands.
☞ Cleaning
• Power off the device and remove it from the power supply before
cleaning the surface.Use a soft, lint-free cloth. Never use liquid,
gaseous, or easily flammable cleansers (like sprays, abrasives,
polishes, and alcohol)
• Do not use any liquid cleaning agents to clean the lens as they may
damage the protective coating on the lens.
• Wipe the surfaces gently. Be careful that you do not scratch the surfaces.
• Use lens cleaning paper to clean the lens of this projector.
☞ Repairs
• Do not make any repairs to the device yourself. Only have your device
repaired by an authorized service center.
• Improper maintenance can result in injuries or damage to the device.
• Refer all servicing to qualified service personnel.
☞ Caution
• Possibly hazardous optical radiation emitted from this device.
• Do not stare at the operating beam. The bright light may hurt your eyes.
What’s Included
Projector Remote control AC-DC Adaptor Manual
Overview
20
17
12
13
☞ Front View/Top View
1
2
English
5
6
7
4
3
1. I.R(front)
2. Lens
3. Speaker
4. Focus Dial
5. Menu
6. LED Status Indicator
☞ Rear View
7. Exit
8. Home Buttom
9. On/Off
10. Bluetooth Speaker Mode
11. Up/Down/Left/Right/Enter
12. Audio output
14
13. micro SD
15
14. I.R(back)
16
15. Reset
16. Type C
17. Air Vent
18
18. Speaker
19. USB input
20. HDMI in
21
21. DC in
11
98 10
Loading...