AOpen FM56-SV User Manual

Inst all atio n Guid e of FM56-SV Sof t PCI Mod em

Suppo r t O/S

1. Windows 9x

2. Windows ME

3. Windows 2000

4. Windows NT

5. Windows XP

System Requirements

CPU:

l Pentium 166 MHz or higher (Pentium 200 MHz MMX require for

V.80/video phone)

l AMD K6-200 MHz or higher
l Cyrix 6x86MX MHz PR200 or higher

Memory:

32 MB or more

Outlet Descript ion

The Appearance of PCI Modem

PCI Card Br acket Connect i o n

1

Hardw are Installation

1. Turn off the computer. No power must be applied to your computer when
you install the internal modem, or the computer could be damaged.

2. Make sure you can freely access the back of the personal computer.
Remove the computer cover.

3. Select any available PCI slot into which you can
install the internal modem.

4. Unscrew and remove the slot cover.

5. Hold the internal modem above the slot you have
selected, and carefully slide the modem into the
slot, applying even pressure to both ends of the
modem. Stop inserting the modem when its
gold-plated edge connector is aligned and fully
seated into the base of the computer.

6. Use the screw that was holding the slot cover to
secure the modem in the slot.

7. Use the cover-mounting screws to secure the computer cover. This
completes the hardware installation of your modem.

8. Locate an available RJ-11 modular jack telephone outlet.

9. Take one end of the modular cord supplied with the modem and plug it into
the LINE modular jack on the back of modem.

10.Plug the other end of the modular cord into the modular jack on the wall
outlet.

11.Connect the telephone's modular cord into the PHONE jack on the back of
your modem. (An active telephone line and telephone set are needed if you
need to use a telephone with your modem.)

12.Lift your telephone's handset and listen for a dial tone.

2

Softw are Installatio n

Installatio n Proc edures for Window s 9x

1. Restart PC after inserting the PCI modem into the PCI slot of PC. When

Windows detects the modem, the message "This wizard searches for new
drivers for: PCI Communication Device" is displayed. Click Next.

2. To search for the best drivers for your device, click Next.

3. Insert the driver CD into your CD-ROM drive and then specify the location:

F:\Drivers\FM56-SV\Win9x (F is your CD-ROM drive.) and then click
Next .

3