Specifications and Main Features
1. Supports Celeron and Pentium III Socket370 processors.
2. Jumper-free architecture for built-in voltage detection.
3. Three DIMM slots extendable up to 1.5GB with PC133 SDRAM modules.
4. Embedded AC97 sound provided with a switch option through JP12.
5. 4X AGP slot provided for enhanced 3D graphic performance.
6. Total USB support – 4 ports (2 at back base and extra 2).
7. WAN and modem activation features.
8. Hardware monitors for CPU’s temperature, fans status, voltage.
9. Current sensors protective for CPU and power supply system.
10. Also has Auto Recovery of AC power.
11. Compatible with IDE ATA/66 and ATA/100 peripherals interface.
12. Wireless modules with Infrared interface option are available.
13. Fuses, Resettable for the ports of keyboard and USB.
14. BIOS with multilingual support.
15. 1500uF Low ESR Rapid Rating Capacitor in place for reliability.
Frequently Asked Questions
Q1: What types of CPUs are supported by the AX34 motherboard?
A. The AX34 motherboard is designed for use with Socket370 Celeron and Pentium 3 cpus.
Q2: How much RAM can I install on the AX34 motherboard?
A2: Up to 1.5GB PC133 SDRAM can be added in the three mixed 168 pin DIMM.
Q3: Does this motherboard have integrated sound?
A3: The motherboard does have integrated AC97 sound that can be enabled or disabled with the assistance of jumper JP12.
Q4: What graphics interface can the AX34 use?
A4: AX34 motherboard is compatible with the 4X AGP interface facilitating enhanced 3D graphics performance.
Q5: Are Wake On LAN features available with this motherboard?
A5: Worry not, it has Wake On LAN (WOL) capability.
Q6: What protection circuits have been included to prevent possible failure of the components of the board?
A6: It provides over current protection for the processor and power supply and incorporates resettable fuses for the keyboard and USB ports.
Q7: Can I find a hardware monitoring system in the AX34?
A7: Yes, the AX34 Motherboard has hardware monitoring system that records CPU temperature, fan activity and voltage readings.
Q8: How many IDE devices can be connected to the AX34 motherboard at a time?
A8: Additionally, the AX34 able to support four IDE devices through two channels which are Primary and Secondary alongside ATA 66 and 100 devices.
Q9: How does the Auto power recovery function of the AC Power Works?
A9: If the AC supply was absent and the power supply resumes, in such a case the system will turn ON on its own provided this option is activated in BIOS setup.
Q10: Is it possible to connect an Infrared module to the AX34 motherboard?
A10: Yes, it features an IrDA connector which can be used for wireless infrared communication.
User Manual
Loading...