AOpen AP57-TBL User Manual

Appendix A
Jumper Table Summary
Setting the CPU Voltage
JP7
1-2 3-4 5-6 7-8 9-10 11-12
JP9
Close Open
CPU Type Vcore Vio Vcpuio JP7 JP8 JP9 JP10 JP11
INTEL P54C 3.45V 3.45V Vcore 1-2 1-2 Closed Open Closed INTEL PP/MT 2.8V 3.45V Vio 7-8 1-2 Open Closed Open AMD K5 (Single voltage) AMD K6 2.9V 3.45V Vio 5-6 1-2 Open Closed Open Cyrix 6x86 3.52V 3.45V Vcore 3-4 1-2 Closed Open Closed Cyrix 6x86L 2.8V 3.45V Vio 7-8 1-2 Open Closed Open
3.45V (default for P54C)
3.52V (Cyrix or AMD)
2.9V (AMD K6)
2.8V (PP/MT P55C)
2.7V
2.5V
JP10
Open Close
3.52V 3.45V Vcore 3-4 1-2 Closed Open Closed
JP11
Close Open
CPU Type (Vcpuio)
Single Voltage CPU, Vcpuio = Vcore, (default). Dual Voltage CPU, Vcpuio = Vio, (PP/MT P55C).
JP8
1-2 3-4
I/O Voltage (Vio)
3.45V (default)
3.52V
A-1
Jumper Table Summary
Selecting the CPU Frequency
JP1
1-2 2-3 2-3 1-2
JP2
1-2 1-2 2-3 2-3
CPU Frequency Ratio
1.5x (3.5x) 2x
2.5x (1.75x) 3x
JP3
2-3 1-2 2-3
JP4
2-3 2-3 1-2
JP13
1-2 5-6 1-2 3-4 3-4
CPU External Clock
50MHz 60MHz 66MHz
Note: The feature CPU Intel PP/MT 233MHz is using 1.5x jumper setting for 3.5x frequency ratio, and AMD PR166 is using 2.5x setting for 1.75x frequency ratio.
Note: The future CPUs have not been tested by AOpen Quality Test Department. It is possible that this mainboard can not support these future CPUs.
Intel Pentium
P54C 75 75MHz = 1.5X 50MHz 1-2 & 1-2 2-3 & 2-3 1-2 & 5-6 P54C 90 90MHz = 1.5x 60MHz 1-2 & 1-2 1-2 & 2-3 1-2 & 3-4 P54C 100 100MHz = 1.5x 66MHz 1-2 & 1-2 2-3 & 1-2 3-4 P54C 120 120MHz = 2x 60MHz 2-3 & 1-2 1-2 & 2-3 1-2 & 3-4 P54C 133 133MHz = 2x 66MHz 2-3 & 1-2 2-3 & 1-2 3-4 P54C 150 150MHz = 2.5x 60MHz 2-3 & 2-3 1-2 & 2-3 1-2 & 3-4 P54C 166 166MHz = 2.5x 66MHz 2-3 & 2-3 2-3 & 1-2 3-4 P54C 200 200MHz = 3x 66MHz 1-2 & 2-3 2-3 & 1-2 3-4
CPU Core Frequency
Ratio External
Bus Clock
JP1 & JP2 JP3 & JP4 JP13
Intel Pentium
PP/MT 150 150MHz = 2.5x 60MHz 2-3 & 2-3 1-2 & 2-3 1-2 & 3-4 PP/MT 166 166MHz = 2.5x 66MHz 2-3 & 2-3 2-3 & 1-2 3-4 PP/MT 200 200MHz = 3x 66MHz 1-2 & 2-3 2-3 & 1-2 3-4 PP/MT 233 200MHz = 3.5x 66MHz 1-2 & 1-2 2-3 & 1-2 3-4
CPU Core Frequency
Ratio External
Bus Clock
JP1 & JP2 JP3 & JP4 JP13
A-2
Loading...
+ 2 hidden pages