AOC L42W781B, L32W781B, L37W781B, L26W781B User Manual

LCD TV User Manual

L26W781B L32W781B L37W781B L42W781B

USER’S MANUAL

TABLE OF CONTENTS

INSTALLATION ---------------------------------------------------------- 1

BEFORE CALLING SERVICE --------------------------------------- 29

For Your Safety ---------------------------------------------------- 1

IMPORTANT SAFETY INSTRUCTIONS ------------------------ 4

PREPARATION ---------------------------------------------------------- 6

OPERATING INSTRUCTIONS -------------------------------------- 8

Use of the remote control --------------------------------------- 8 Teletext -------------------------- ------------------------------------ 9 To use the menus ------------------------------------------------ 10 Main menu --------------------------------------------------------- 10 DTV menu ------------------------------------------------------------ 18

CONNECT PERIPHERAL EQUIPMENT -------------------------- 24

Control Knobs ------------------------------------------------------ 24 Preparation ---------------------------------------------------------- 25

Video recorder ------------------------------------------------------ 26

SCART connection ------------------------------------------------ 26 Camera, camcorder, Video Game set ------------------------ 27 Wall Mount ----------------------------------------------------------- 27

Headphone --------------------------------------------------------- 28

Tips ------------------------------------------------------------------- 28

Glossary ------------------------------------------------------------- 30

Product specification---------------------------------------------- 31

Thank you very much for choosing the LCD TV. We recommend that you take a few minutes to read carefully through this manual before installing and switching on the TV. Please keep this manual in a safe place for your future reference.

LCD TV

FOR YOUR SAFETY

Before operating the TV please read this manual thoroughly. This manual should be retained for future reference.

NOTICE

The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.

WARNING:

To prevent fire or shock hazard, do not expose the TV to rain or moisture. Dangerously high voltages are present inside the TV. Do not open the cabinet. Refer servicing to qualified personnel only.

Disposal of Waste Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment

by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

This manual applies to several TV set models. Some features may not be available on the model you purchased. Optional functions are indicated by the following symbol: 2

Compliance Information

CE Conformity for European Countries

The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.”

SRS and are registered trademarks of SRS Labs, Inc. This product is designed using SRS technology with permission from SRS Labs, Inc.

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices). 3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead). 4. Lead as an allotting element in steel containing up to

0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug.

When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. The TV should be operated only from the type of power source indicated

on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

14. Unplug this apparatus during lightning storms or when unused for long

periods of time.

15. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

16. This product may contain lead or mercury. Disposal of these materials may

be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org

17. Damage Requiring Service – The appliance should be serviced by

qualified service personnel when: A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or exhibits a marked

change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

18. Tilt/Stability – All televisions must comply with recommended

international global safety standards for tilt and stability properties of its cabinets design. y Do not compromise these design standards by applying excessive pull

force to the front, or top, of the cabinet, which could ultimately overturn the product.

y Also, do not endanger yourself, or children, by placing electronic

equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.

19. Wall or Ceiling Mounting – The appliance should be mounted to a wall or

ceiling only as recommended by the manufacturer.

20. Power Lines – An outdoor antenna should be located away from power

lines.

21. Outdoor Antenna Grounding – If an outside antenna is connected to the

receiver, be sure the antenna system is grounded so as to provide some

protection against voltage surges and built up static charges. Section 810 of the National Electric Cord, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an antenna-discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See Figure below.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the adapter!

22. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

PREPARATION

1. Place the TV on a solid surface.

Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing.

2. Insert the aerial plug firmly into the aerial socket ANT IN 75Ω at the back of

the TV.

3. Remote control:

Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AA 1.5V).

4. Power:

Insert the power cord in the wall socket having an AC power supply .

5. Turn the TV on:

Press the power button of the TV to turn it on. When the TV is ON, the indicator turns green.

If the TV is in power off, the indicator in front of the TV illuminates amber.

OPERATING INSTRUCTIONS

USE OF THE REMOTE CONTROL

POWER:

Press to turn on/off the TV. The TV is never completely powered off unless it is physically unplugged.

VIDEO

Press this key you could select AV1, S-VIDEO, HDTV and HDMI.

SCART

Press this key you could select SCART 1SCART2and SCART2-S.

< > button

Use this button to confirm

selection or adjust the

desired parameter;

otherwise, to increa se

0~9 DIGIT BUTTONS

/decrease the volume.

button

To select a TV channel.

SUBPAGE

Teletext Sub-page function.

Source

Select your input source from list, according to where you connected your external source.

SOUND

To select Mono/ Stereo/Dual from TV RF input.

DTV MENU

Press this key to display DTV menu.

Zoom +,-. Press these key to select desired picture format. (4:3, CINERAMA,16:9)

VOL Press + or – to increase or decrease the volume.

MENU Press this key to display main menu.

< > button

Use this button to confirm selection or adjust the desired parameter.

When in menu mode, use this button to select to the up/down.

OK Press this KEY to validate your selected.

button

DISPLAY

Press this key to display: (1) the channel number when

watching a TV program.

(2) the input source when

watching an AV program.

MUTE

Temporarily interrupt the sound or restore it.

Display PC mode

Display TV mode

PRE-CH

To display the previously selected TV channel.

EPG

Press this key to display electronic program guide screen in DTV mode.

SLEEP

With this key you can set a time period after which the TV should switch itself to standby. Press the key repeatedly to select the number of minutes. The counter runs from 15, 30, 45, 60, 90, 120 minutes. The timer begins to count down from the number of minutes selected after the display has disappeared.

Press

or (or MENU ▲/▼ button) buttons to scroll through the channels.

EXIT

Press this key to exit main menu.

TELETEXT

Teletext is an information service organized like a magazine, which is provided by some TV stations in addition to regular television broadcasting.

TELETEXT Press TELETEXT. The Teletext screen appears. To turn off the Teletext mode, press TELETEXT again.

MIX

Press MIX to superimpose the teletext over a normal broadcast picture. Press again to return to Teletext mode.

SIZE

Press SIZE repeatedly to display the upper teletext part, the lower teletext part and then to return to the normal.

RED / GREEN / YELLOW / BLUE

Use the COLOURED BUTTONS to operate the Teletext screen.

i INFO Press i-INFO to show DTV information.

INDEX Press INDEX to return to the main index page.

SUBTITLE

Press to select the next page marked as a subtitle page and request it as the display page.

HOLD

Press HOLD to hold the Teletext page when viewing information. Press again to return to automatic page update.

REVEAL

Press REVEAL to display reveal hidden words e.g. quiz page answers. Press again to hide.

PAGE SELECTION Page can be selected in two ways. a. Press ▼or ▲ to increase or decrease the page number by one. b. By entering the page number, using digit buttons 0~9.

SUBPAGE ACCESS

When Teletext information exceeds more than one page, press SUBPAGE first then select the required page number using digit buttons 0~9.

+ 23 hidden pages