20" LCD Color Monitor |
AOC e2051Sn |
Service
Service
Service
|
|
|
|
|
|
Horizontal Frequency |
|
|
|
|
|
|
|
30-83 KHz |
|
|
|
Table of Contents |
|
|
|||
Description |
Page |
Description |
Page |
||||
Table of Contents.......……..............................……........1 |
5.Block Diagram…….........………….................24 |
|
|||||
|
|
|
|
|
6.Schematic……………........................................25 |
|
|
Revision |
List.…........................................…………........2 |
|
|||||
|
|
|
|
|
6.1.Main Board………...........................................25 |
|
|
Important |
Safety |
Notice.……............................……......3 |
|
||||
|
|
|
|
|
6.2.Key Board...…….............................................30 |
|
|
1.Monitor |
Specification..............................………..........4 |
|
|||||
|
|
|
|
|
7.PCB Layout..………….......................................31 |
|
|
2.LCD Monitor Description……………………………......5 |
|
||||||
|
|
|
|
|
7.1.Main Board………...........................................31 |
|
|
3.Operation Instruction…………...............……..............6 |
|
||||||
|
|
|
|
|
7.2.Key Board…………….....................................33 |
|
|
3.1.General Instructions...........................…...................6 |
|
||||||
|
|
|
|
|
8.Maintainability……….........................................34 |
|
|
3.2.Hot Keys…………….…..............……...............6 |
|
||||||
|
|
|
|
|
8.1.Equipments and Tools Requirement...............34 |
|
|
3.3.OSD |
Setting…………….…...........................…......7 |
|
|||||
|
|
|
|
|
8.2.Trouble Shooting………….............................35 |
|
|
4.Input/Output Specification............……………............19 |
|
||||||
|
|
|
|
|
9.White-Balance, Luminance Adjustment.............39 |
|
|
4.1.Input Signal Connector............………….................19 |
|
||||||
|
|
|
|
|
10.Monitor Exploded View………..…….…............41 |
|
|
4.2.Factory Preset Display Modes…….........................20 |
|
||||||
|
|
|
|
|
11.BOM List…………………………………...........43 |
|
|
4.3.Panel Specification.....………...…………................21 |
|
||||||
|
|
|
|
|
|
|
|
SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING
Downloaded from www.Manualslib.com manuals search engine
Revision List
Version |
Release Date |
Revision History |
L&T Model Name |
|
|
|
|
|
|
A00 |
Nov-18-2011 |
Initial Release |
TABJT42QB7E6NNF.LF |
|
|
||||
TABJT42KB7E6NNF.LF |
||||
|
|
|
||
|
|
|
|
|
A01 |
Jan-17-2011 |
Add new model |
TABJT42CB7SUNNF.LF |
|
|
|
|
|
|
A02 |
Mar-21-2012 |
Add new model |
TABJT42AB7PGNNF.LF |
|
|
|
|
|
|
A03 |
Apr-3-2012 |
Add new model |
TABJT42CB7SPNNF.LF |
|
|
|
|
||
A04 |
Apr-22-2012 |
Add new model |
TABJT42KB7E6NNF.LF |
|
|
|
|
|
|
A05 |
May-23-2012 |
Add new model |
TABJUA2YB7A2NNF.LF |
|
|
|
|
|
|
A06 |
JUL-22-2012 |
Add new model |
TABJUA2QB7E6NNF.LF |
|
|
|
|
|
|
A07 |
JUL-27-2012 |
Add new model |
TABJUA2KB7E6NNF.LF |
|
|
|
|
|
|
A08 |
AUG-20-2012 |
Add new model |
TABJT42MB7VENNF.LF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2
Downloaded from www.Manualslib.com manuals search engine
Important Safety Notice
Proper service and repair is important to the safe, reliable operation of all AOC Company Equipment. The service procedures recommended by AOC and described in this service manual are effective methods of performing service operations. Some of these service operations require the use of tools specially designed for the purpose. The special tools should be used when and as recommended.
It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in order to minimize the risk of personal injury to service personnel. The possibility exists that improper service methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. AOC could not possibly know, evaluate and advise the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Consequently, AOC has not undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not recommended by AOC must first satisfy himself thoroughly that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected.
Hereafter throughout this manual, AOC Company will be referred to as AOC.
WARNING
Use of substitute replacement parts, which do not have the same, specified safety characteristics may create shock, fire, or other hazards.
Under no circumstances should the original design be modified or altered without written permission from AOC. AOC assumes no liability, express or implied, arising out of any unauthorized modification of design.
Servicer assumes all liability.
FOR PRODUCTS CONTAINING LASER:
DANGER-Invisible laser radiation when open AVOID DIRECT EXPOSURE TO BEAM.
CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
CAUTION -The use of optical instruments with this product will increase eye hazard.
TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF THIS SERVICE MANUAL.
Take care during handling the LCD module with backlight unit
-Must mount the module using mounting holes arranged in four corners.
-Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen. -Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to the panel.
-Protect the module from the ESD as it may damage the electronic circuit (C-MOS). -Make certain that treatment person’s body is grounded through wristband.
-Do not leave the module in high temperature and in areas of high humidity for a long time. -Avoid contact with water as it may a short circuit within the module.
-If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may damage the panel.)
3
Downloaded from www.Manualslib.com manuals search engine
1. Monitor Specifications
4
Downloaded from www.Manualslib.com manuals search engine
2. LCD Monitor Description
The LCD MONITOR will contain a main board and a key board which house the flat panel control logic, brightness control logic and DDC.
Monitor Block Diagram
LED Drive.
Flat Panel and
LED backlight
Main Board |
|
|
|
Key Board |
|
|
|
|
|
|
|
|
|
D-SUB |
Adapter |
|
Signal |
|
|
|
|
|
|
AC-IN 100V~24
5
Downloaded from www.Manualslib.com manuals search engine
3. Operating Instructions
3.1 General Instructions
Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor. By changing these settings, the picture can be adjusted to your personal preferences.
3.2 Hotkeys
Power
Press the Power button to turn on/off the monitor.
Menu/Enter
Press to display the OSD or confirm the selection
Eco (DCR)/-
Press the Eco key continuously to select the Eco mode of brightness and DCR on when there is no OSD. (Eco mode hot key may not be available in all models).
4:3 or Wide/+
When there is no OSD, press > continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or input signal resolution is wide format, the hot key is disabled to adjust.)
Source/Auto / Exit
Auto / Exit
When the OSD is closed, press Auto/Source/Exit button continuously about 2 second to do auto configure (only for the models with dual or more inputs).
When the OSD is closed, press Auto/Source/Exit button will be Source hot key function (Only for the models with dual or more inputs).
6
Downloaded from www.Manualslib.com manuals search engine
3.3 OSD Setting
Basic and simple instruction on the control keys.
1)Press the MENU-button to activate the OSD window.
2)Press < or > to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate sub-menu . Once the desired function is highlighted, press MENU-button to activate it.
3) Press |
or to change the settings of the selected function. Press |
AUTO to exit. If you want to |
adjust any other function, repeat steps 2-3.
4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.
Notes:
1)If the product has only one signal input, the item of "Input Select" is disable to adjust.
2)If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to adjust.
3)One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingly.
7
Downloaded from www.Manualslib.com manuals search engine
Luminance
1
Press |
(Menu) to display menu |
2
Press |
or |
to select |
(Luminance), and press |
to enter |
3
Press |
or |
to select submenu, and press to |
enter. |
8
Downloaded from www.Manualslib.com manuals search engine
4
Press or to adjust
5
Press to exit.
9
Downloaded from www.Manualslib.com manuals search engine
Image Setup
1
Press (Menu) to display menu
2
Press |
or |
to select |
(Image Setup) , and press |
to enter. |
3
Press or to select submenu, and press to enter.
4
Press or to adjust.
10
Downloaded from www.Manualslib.com manuals search engine
5
Press |
to exit. |
|
|
|
|
|
|
|
|
|
|
Clock |
0-100 |
Adjust picture Clock to reduce Vertical-Line noise. |
|
|
|
|
|
|
|
Phase |
0-100 |
Adjust Picture Phase to reduce Horizontal-Line noise |
|
|
|
|
|
|
|
Sharpness |
0-100 |
Adjust picture sharpness |
|
|
|
|
|
|
|
H.Position |
0-100 |
Adjust the horizontal position of the picture. |
|
|
|
|
|
|
|
V.Position |
0-100 |
Adjust the vertical position of the picture. |
|
|
|
|
|
Color Setup
1
Press (Menu) to display menu.
2
Press |
or |
to select |
(Color Setup), and press |
to enter. |
11
Downloaded from www.Manualslib.com manuals search engine
3
Press |
or |
to select submenu, and press |
to enter. |
4
Press or to adjust.
5
Press to exit.
12
Downloaded from www.Manualslib.com manuals search engine
|
|
Warm |
|
Recall Warm Color Temperature from EEPROM. |
|
|
|
|
|
|
|
Normal |
|
Recall Normal Color Temperature from EEPROM. |
|
|
|
|
|
|
|
Cool |
|
Recall Cool Color Temperature from EEPROM. |
|
Color setup. |
|
|
|
|
sRGB |
|
Recall SRGB Color Temperature from EEPROM. |
|
|
|
|
|
|
|
|
|
Red |
Red Gain from Digital-register |
|
|
|
|
|
|
|
User |
Green |
Green Gain Digital-register. |
|
|
|
|
|
|
|
|
Blue |
Blue Gain from Digital-register |
|
|
|
|
|
|
|
Full |
on or off |
Disable or Enable Full Enhance Mode |
|
|
Enhance |
||
|
|
|
|
|
|
|
|
|
|
|
DCB Mode |
Nature Skin |
on or off |
Disable or Enable Nature Skin Mode |
|
|
|
|
|
|
Green Field |
on or off |
Disable or Enable Green Field Mode |
|
|
|
|||
|
|
|
|
|
|
|
Sky-blue |
on or off |
Disable or Enable Sky-blue Mode |
|
|
|
|
|
|
|
AutoDetect |
on or off |
Disable or Enable AutoDetect Mode |
|
|
|
|
|
|
DCB Demo |
|
on or off |
Disable or Enable Demo |
|
|
|
|
|
Picture Boost
1
Press (Menu) to display menu.
2
Press |
or |
to select |
(Picture Boost), and press |
to enter. |
13
Downloaded from www.Manualslib.com manuals search engine
3
Press |
or |
to select submenu, and press |
to enter. |
4
Press or to adjust.
5
Press |
to exit. |
|
|
|
|
|
|
|
|
|
|
Frame Size |
14-100 |
Adjust Frame Size |
|
|
|
|
|
|
|
Brightness |
0-100 |
Adjust Frame Brightness |
|
|
|
|
|
|
|
Contras |
0-100 |
Adjust Frame Contrast |
|
|
|
|
|
|
|
H. position |
0-100 |
Adjust Frame horizontal Position |
|
|
|
|
|
|
|
V.position |
0-100 |
Adjust Frame vertical Position |
|
|
|
|
|
|
|
Bright Frame |
on or off |
Disable or Enable Bright Frame |
|
|
|
|
|
14
Downloaded from www.Manualslib.com manuals search engine
OSD Setup
1
Press (Menu) to display menu.
2
Press |
or |
to select |
(OSD Setup), and press |
to enter. |
3
Press or to select submenu, and press to enter.
15
Downloaded from www.Manualslib.com manuals search engine
4
Press or to adjust.
5
Press |
to exit. |
|
|
|
|
|
|
|
H.Position |
0-100 |
Adjust the horizontal position of OSD |
|
|
|
|
|
V.Position |
0-100 |
Adjust the vertical position of OSD |
|
|
|
|
|
Timeout |
5-120 |
Adjust the OSD Timeout |
|
|
|
|
|
Transparence |
0-100 |
Adjust the transparence of OSD |
|
|
|
|
|
Language |
|
Select the OSD language |
|
|
|
|
Extra
1
Press |
(Menu) to display menu. |
16
Downloaded from www.Manualslib.com manuals search engine