AOC C27G2, CQ27G2 User Manual

www.aoc.com

LCD Monitor User Manual

C27G2/CQ27G2

LED backlight

1

©2019 AOC. All Rights Reserved.

Safety ................................................................................................................................................................................... 1

National Conventions ................................................................................................................................................ 1

Power ........................................................................................................................................................................ 2

Installation ................................................................................................................................................................. 3

Cleaning .................................................................................................................................................................... 4

Other ......................................................................................................................................................................... 5

Setup .................................................................................................................................................................................... 6

Contents in Box ......................................................................................................................................................... 6

Setup Stand & Base .................................................................................................................................................. 7

Adjusting Viewing Angle ............................................................................................................................................ 8

Connecting the Monitor ............................................................................................................................................. 9

Wall Mounting.......................................................................................................................................................... 10

Adaptive-Sync function ............................................................................................................................................11

Adjusting ............................................................................................................................................................................. 12

Hotkeys ................................................................................................................................................................... 12

OSD Setting ............................................................................................................................................................ 13

Luminance ................................................................................................................................................... 14

Image Setup (C27G2) .................................................................................................................................. 15

Color Setup .................................................................................................................................................. 16

Picture Boost ............................................................................................................................................... 17

OSD Setup ................................................................................................................................................... 18

Game Setting ............................................................................................................................................... 19

Extra ............................................................................................................................................................ 20

Exit ............................................................................................................................................................... 21

LED Indicator .......................................................................................................................................................... 21

Troubleshoot ....................................................................................................................................................................... 22

Specication ....................................................................................................................................................................... 23

General Specication .............................................................................................................................................. 23

Preset Display Modes ............................................................................................................................................. 25

Pin Assignments ...................................................................................................................................................... 27

Plug and Play .......................................................................................................................................................... 29

i

Safety

National Conventions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These

blocks are notes, cautions, and warnings, and they are used as follows:

NOTE:

CAUTION:

problem.

WARNING:

may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specic presentation of the

warning is mandated by regulatory authority.

A NOTE indicates important information that helps you make better use of your computer system.

A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings

1

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the

type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will t

only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an

electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of

the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the

monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in re or electric shock.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate congured

receptacles marked between 100-240V AC, Min. 5A.

The wall socket shall be installed near the equipment and shall be easily accessible.

2

Installation

Installed with stand

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a

person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by

the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use

mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.

Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a re or electric

shock. Never spill liquids on the monitor.

Do not place the front of the product on the oor.

If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit

instructions.

Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence

overheating may cause a re or damage to the monitor.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the

stand:

Installed with stand

4 inches

10cm

12 inches

30cm

4 inches

10cm

Leave at lease this
space around the set

4 inches

10cm

3

Cleaning

Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent

which will cauterize the product cabinet.

When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it

will scratch the screen surface.

Please disconnect the power cord before cleaning the product.

4

Other

If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a

Service Center.

Make sure that the ventilating openings are not blocked by a table or curtain.

Do not engage the LCD monitor in severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

5

Setup

*

*

*

*

*

CD Manual

Power Cable DP Cable HDMI Cable VGA Cable

Warranty Card Stand Base

Contents in Box

Not all signal cables (DP, HDMI, VGA cables) will be provided for all countries and regions. Please check with the local

dealer or AOC branch ofce for conrmation.

6

Setup Stand & Base

Please setup or remove the base following the steps as below.

Setup:

Remove:

7

Adjusting Viewing Angle

For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own

preference.

Hold the stand so you will not topple the monitor when you change the monitor’s angle.

You are able to adjust the monitor as below:

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

8

Connecting the Monitor

C27G2 CQ27G2

6

1

2

3 5

6

1

2

345

Cable Connections In Back of Monitor and Computer:

1. HDMI-2

2. HDMI-1

3. DP

4. D-SUB

5. Earphone

6. Power

Connect to PC

1. Connect the power cord to the back of the display rmly.

2. Turn off your computer and unplug its power cable.

3. Connect the display signal cable to the video connector on the back of your computer.

4. Plug the power cord of your computer and your display into a nearby outlet.

5. Turn on your computer and display.

If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.

To protect equipment, always turn off the PC and LCD monitor before connecting.

9

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure.

Follow these steps:

1. Remove the base.

2. Follow the manufacturer’s instructions to assemble the wall mounting arm.

3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of
the monitor.

4. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on
attaching it to the wall.

Noted: VESA mounting screw holes are not available for all models, please check with the dealer or ofcial department of

AOC.

10

Adaptive-Sync function

1. Adaptive-Sync function is working with DP/HDMI

2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com

• Radeon™ RX Vega series

• Radeon™ RX 500 series

• Radeon™ RX 400 series

• Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265 except

• Radeon™ Pro Duo (2016)

• Radeon™ R9 Nano series

• Radeon™ R9 Fury series

• Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)

）

11

Adjusting

1 2 3 4 5

Hotkeys

Source/Auto/Exit (C27G2)

1

Source/Exit (CQ27G2)

2 Game Mode/<

3 Dial Point/>

4 Menu/Enter

5 Power

Power

Press the Power button to turn on the monitor.

Menu/Enter

When there is no OSD, Press to display the OSD or conrm the selection. Press about 2 second to turn off the monitor.

Game Mode/<

When there is no OSD, press ”<” key to open game mode function, then press ”<” or “>” key to select game mode (FPS,

RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the different game types.

Dial Point/>

When there is no OSD, press Dial Point button to show / hide Dial Point.

Source/Auto/Exit

When the OSD is closed, press Source/Auto/Exit button will be Source hot key function.

When the OSD is closed, press Source/Auto/Exit button continuously about 2 second to do auto congure (Only for the

models with D-Sub).

12

OSD Setting

Luminance Image Setup Color Setup Picture Boost OSD Setup Game Setting ExitExtra

Contrast 50

Brightness 90

Eco mode Standard

Gamma Gamma 1

DCR Off

HDR Effect Off

Basic and simple instruction on the control keys.

1). Press the

2). Press < or > to navigate through the functions. Once the desired function is highlighted, press the

MENU-button

to activate the OSD window.

MENU-button

activate it, press < or > to navigate through the sub-menu functions. Once the desired function is highlighted, press

MENU-button

3). Press < or > to change the settings of the selected function. Press

to activate it.

AUTO–button

to exit. If you want to adjust any

other function, repeat steps 2-3.

4). OSD Lock Function: To lock the OSD, press and hold the

power button

and then press

to turn the monitor on. To un-lock the OSD - press and hold the

power button

to turn the monitor on.

MENU-button

while the monitor is off and then press

MENU-button

while the monitor is off

Notes:

1). If the product has only one signal input, the item of “Input Select” is disable to adjust.

2). DCR, Color Boost and Picture Boost, for these states that only one state can exist

to

13

Luminance

Luminance Image Setup Color Setup Picture Boost OSD Setup Game Setting ExitExtra

Contrast 50

Brightness 90

Eco mode Standard

Gamma Gamma 1

DCR Off

HDR Effect Off

Luminance Image Setup Color Setup Picture Boost OSD Setup Game Setting ExitExtra

Contrast 50

Brightness 90

Eco mode Standard

Gamma Gamma 1

DCR Off

HDR Mode Off

Contrast 0-100 Contrast from Digital-register.

Brightness 0-100 Backlight Adjustment

Standard Standard Mode

Eco mode

Gamma

DCR

HDR Effect/
Mode

Text Text Mode

Internet Internet Mode

Game Game Mode

Movie

Movie Mode

Sports Sports Mode

Reading Reading Mode

Gamma1 Adjust to Gamma 1

Gamma2 Adjust to Gamma 2

Gamma3 Adjust to Gamma 3

Off Disable dynamic contrast ratio

On Enable dynamic contrast ratio

OFF

HDR Picture

Adjust HDR Effect/Mode.

HDR Movie

HDR Game

14

Image Setup (C27G2)

Color Setup Picture Boost OSD Setup ExitExtra

Image Setup

Clock 50

Phase 50

H. Position 50

V. Position 50

Sharpness 50

Luminance

Game Setting

Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise.

Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise

Sharpness 0-100 Adjust picture sharpness

H. Position 0-100 Adjust the horizontal position of the picture.

V. Position 0-100 Adjust the vertical position of the picture.

15

Color Setup

Picture Boost OSD Setup ExitExtra

Luminance

Red 50

Green 50

Blue 50DCB Demo Off

Color Temp. Warm

DCB Mode Off

Color Setup

Image Setup

Game Setting

Warm Recall Warm Color Temperature from EEPROM.

Normal Recall Normal Color Temperature from EEPROM.

Cool Recall Cool Color Temperature from EEPROM.

Color Temp.

sRGB Recall SRGB Color Temperature from EEPROM.

Red Red Gain from Digital-register

User

Green Green Gain Digital-register.

Blue Blue Gain from Digital-register

Full Enhance on or off Disable or Enable Full Enhance Mode

Nature Skin on or off Disable or Enable Nature Skin Mode

DCB Mode

Green Field on or off Disable or Enable Green Field Mode

Sky-blue on or off Disable or Enable Sky-blue Mode

Auto Detect on or off Disable or Enable AutoDetect Mode

DCB Demo on or off Disable or Enable Demo

16

Picture Boost

OSD Setup ExitExtra

Luminance

Image Setup

Brightness 50

Contrast 50

H. Position 0

V. Position 0

Bright Frame off

Frame Size 14

Picture Boost

Color Setup

Game Setting

Bright Frame on or off Disable or Enable Bright Frame

Frame Size 14-100 Adjust Frame Size

Brightness 0-100 Adjust Frame Brightness

Contrast 0-100 Adjust Frame Contrast

H. position 0-100 Adjust Frame horizontal Position

V. position 0-100 Adjust Frame vertical Position

Note:

Adjust the brightness, contrast, and position of the Bright Frame for better viewing experience.

17

OSD Setup

ExitExtra

Luminance

Image Setup

Color Setup

H. Position 50

V. Position 0

Transparence 25

50

Language English

Timeout 10

DP Capability 1.2 Volume

Break Reminder Off

Frame Counter Off

OSD Setup

Picture Boost

Game Setting

Language Select the OSD language

Timeout 5-120 Adjust the OSD Timeout

DP Capability 1.1/1.2

Please be noted that only DP1.2 support Adaptive-Sync

function

H. Position 0-100 Adjust the horizontal position of OSD

V. Position 0-100 Adjust the vertical position of OSD

Volume 0-100 Volume Adjustment.

Transparence 0-100 Adjust the transparence of OSD

Break Reminder

Frame Counter

(C27G2)

on or off

Off / Right-Up /
Right-Down / Left­Down / Left-Up

Break reminder if the user continuously work for more

than 1hrs

Display V frequency on the corner selected
(Frame counter feature only works with AMD graphic
card.)

Note:

If the DP video content supports DP1.2, please select DP1.2 for DP Capability; otherwise, please select DP1.1

18

Game Setting

Picture Boost OSD SetupExitExtra

Luminance

Low Input Lag

LowBlue Mode

Overdrive

Shadow Control

Game Mode Off

Off

Off

Off

Image Setup

Color Setup

Game Setting

50

Game Color

10

Frame Counter

Off

Adaptive-Sync

Off

MBR

0

For playing FPS (rst Person Shooters) games.

Improves dark theme black level details.
For playing RTS (Real Time Strategy). Improves the

image quality.
For playing Racing games, Provides fastest response

time and high color saturation.

Game Mode

FPS

RTS

Racing

Gamer 1 User’s preference settings saved as Gamer 1.

Gamer 2 User’s preference settings saved as Gamer 2.

Gamer 3 User’s preference settings saved as Gamer 3.

off No optimization by Smart image game

Shadow Control Default is 50, then end-user can adjust
from 50 to 100 or 0 to increase contrast for clear picture.

Shadow Control 0-100

1. If picture is too dark to be saw the detail clearly,
adjusting from 50 to100 for clear picture.

2. If picture is too white to be saw the detail clearly,
adjusting from 50 to0 for clear picture

Low Input Lag On/Off Turn off frame buffer to decrease input lag

Game Color 0-20

Game Color will provide 0-20 level for adjusting
saturation to get better picture.

Reading / Ofce

Low Blue Mode

/ Internet /

Decrease blue light wave by controlling color
temperature.

Multimedia / Off

Weak

Medium

Overdrive

Strong

Adjust the response time.

Boost

Off

Off / Right-up /

Frame Counter
(CQ27G2)

Right-Down / Left-

Display V frequency on the corner selected

Down / Left-Up

MBR 0 ~ 20 Adjust the Motion Blur Reduction.

Adaptive-Sync On/Off Adjust the Adaptive-Sync.

Note:

The function MBR and Overdrive Boost are available only when Adaptive-Sync is off and the vertical frequency is up to

75 Hz.

19

Extra

Picture Boost OSD SetupExit

Luminance

Image Setup

Color Setup

Off Timer 00

Input Select Auto

Auto Config. No

Reset No

Image Ratio Wide

DDC/CI Yes

Resolution : 1920(H)X1080(V)

H. Frequency : 67KHz

V. Frequency : 60Hz

Extra

Game Setting

Input Select Select Input Signal Source

Auto Cong.

(C27G2)

yes or no Auto adjust the picture to default

Off timer 0-24hrs Select DC off time

Wide

4:3

1:1

17” (4:3)

19” (4:3)

19” (5:4)

Image Ratio

Select image ratio for display.

19”W (16:10)

21.5”W (16:9)

22”W (16:10)

23”W (16:9)

23.6”W (16:9)

24”W (16:9)

DDC/CI yes or no Turn ON/OFF DDC/CI Support

Reset Yes or no Reset the menu to default

20

Exit

Picture Boost OSD Setup

Luminance

Image Setup

Color Setup

Exit

Extra

Game Setting

Exit Exit the main OSD

LED Indicator

Status LED Color

Full Power Mode White

Active-off Mode Orange

21

Troubleshoot

Problem & Question

Power LED Is Not ON

No images on the screen

Picture Is Fuzzy & Has
Ghosting Shadowing Problem

Picture Bounces, Flickers Or
Wave Pattern Appears In The
Picture

Monitor Is Stuck In Active Off­Mode”

Missing one of the primary
colors (RED, GREEN, or
BLUE)

Screen image is not centered
or sized properly

Picture has color defects
(white does not look white)

Possible Solutions

Make sure the power button is ON and the Power Cord is properly
connected to a grounded power outlet and to the monitor.

Is the power cord connected properly?

Check the power cord connection and power supply.

Is the cable connected correctly?

(Connected using the VGA cable)
Check the VGA cable connection.
(Connected using the HDMI cable)
Check the HDMI cable connection.
(Connected using the DP cable)
Check the DP cable connection.
* VGA/HDMI/DP input is not available on every model.

If the power is on, reboot the computer to see the initial screen (the login

screen), which can be seen.
If the initial screen (the login screen) appears, boot the computer in the
applicable mode (the safe mode for Windows 7/8/10) and then change the
frequency of the video card.
(Refer to the Setting the Optimal Resolution)
If the initial screen (the login screen) does not appear, contact the Service
Center or your dealer.

Can you see “Input Not Supported” on the screen?

You can see this message when the signal from the video card exceeds
the maximum resolution and frequency that the monitor can handle
properly.
Adjust the maximum resolution and frequency that the monitor can handle
properly.

Make sure the AOC Monitor Drivers are installed.
Adjust the Contrast and Brightness Controls.
Press to auto adjust.
Make sure you are not using an extension cable or switch box. We
recommend plugging the monitor directly to the video card output connector
on the back.
Move electrical devices that may cause electrical interference as far away
from the monitor as possible.
Use the maximum refresh rate your monitor is capable of at the resolution
you are using.
The Computer Power Switch should be in the ON position.

The Computer Video Card should be snugly tted in its slot.

Make sure the monitor’s video cable is properly connected to the computer.
Inspect the monitor’s video cable and make sure no pin is bent.
Make sure your computer is operational by hitting the CAPS LOCK key on
the keyboard while observing the CAPS LOCK LED. The LED should either
turn ON or OFF after hitting the CAPS LOCK key.

Inspect the monitor’s video cable and make sure that no pin is damaged.
Make sure the monitor’s video cable is properly connected to the computer.

Adjust H-Position and V-Position or press hot-key (AUTO).

Adjust RGB color or select desired color temperature.

Horizontal or vertical
disturbances on the screen

Use Windows 7/8/10 shut-down mode to adjust CLOCK and FOCUS.
Press to auto-adjust.

22

Specification

General Specification

Model name C27G2

Driving system TFT Color LCD

Viewable Image Size 68.6 cm diagonal

Panel

Others

Physical
Characteristics

Environmental

Pixel pitch

Video R, G, B Interface & HDMI lnterface & DP Interface

Separate Sync. H/V TTL

Display Color 16.7M Colors

Horizontal scan range

Horizontal scan Size(Maximum) 597.888mm

Vertical scan range

Vertical Scan Size(Maximum) 336.312mm

Optimal preset resolution 1920x1080@60Hz

Max resolution

Plug & Play VESA DDC2B/CI

Input Connector HDMIx2/DP/VGA

Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, TMDS

Output Connector Earphone out

Power Source 100-240V~, 50/60Hz,1.5A

Power Consumption

Connector Type VGA/HDMI/DP/Earphone out

Signal Cable Type

Temperature

Humidity

Altitude

0.3114mm(H) x 0.3114mm(V)

30k-83kHz(D-SUB)
30k-200kHz(HDMI/DP)

50-76Hz(D-SUB)
48-165Hz(HDMI/DP)

1920x1080@60Hz(D-SUB)
1920x1080@165Hz(HDMI/ DP)

Typical(Brightness = 90,Contrast = 50) 31W

Max. (brightness = 100, contrast =100)≤41W

Power saving

Detachable

Operating 0°~ 40°

Non-Operating -25°~ 55°

Operating 10% ~ 85% (non-condensing)

Non-Operating 5% ~ 93% (non-condensing)

Operating 0~ 5000 m (0~ 16404ft )

Non-Operating 0~ 12192m (0~ 40000ft )

≤

0.3W

23

Panel

Others

Physical
Characteristics

Environmental

Model name CQ27G2

Driving system TFT Color LCD

Viewable Image Size 68.6 cm diagonal

Pixel pitch

Video HDMI lnterface & DP Interface

Separate Sync. H/V TTL

Display Color 16.7M Colors

Horizontal scan range 30k-200kHz

Horizontal scan Size(Maximum)

Vertical scan range 48-144Hz

Vertical Scan Size(Maximum) 335.664mm

Optimal preset resolution 2560x1440@60Hz

Max resolution 2560x1440@144Hz

Plug & Play

Input Connector HDMIx2/DP

Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, TMDS

Output Connector Earphone out

Power Source 100-240V~, 50/60Hz,1.5A

Power Consumption

Connector Type HDMI/DP/Earphone out

Signal Cable Type

Temperature

Humidity

Altitude

0.2331mm(H) x 0.2331mm(V)

596.736mm

VESA DDC2B/CI

Typical(Brightness = 90,Contrast = 50) 28W

Max. (brightness = 100, contrast =100)≤38W

Power saving

Detachable

Operating 0°~ 40°

Non-Operating -25°~ 55°

Operating 10% ~ 85% (non-condensing)

Non-Operating 5% ~ 93% (non-condensing)

Operating 0~ 5000 m (0~ 16404ft )

Non-Operating 0~ 12192m (0~ 40000ft )

≤

0.3W

24

Preset Display Modes

C27G2

STANDARD RESOLUTION

VGA 640x480@60Hz 31.469 59.94

VGA 640x480@67Hz 35 66.667

VGA 640x480@72Hz 37.861 72.809

VGA 640x480@75Hz 37.5 75

VGA 640x480@100Hz 51.08 99.769

VGA 640x480@120Hz 61.91 119.518

DOS MODE 720x400@70Hz 31.469 70.087

DOS MODE 720x480@60Hz 29.855 59.710

SD 720x576@50Hz 31.25 50

SVGA 800x600@56Hz 35.156 56.25

SVGA 800x600@60Hz 37.879 60.317

SVGA 800x600@72Hz 48.077 72.188

SVGA 800x600@75Hz 46.875 75

SVGA 800x600@100Hz 63.684 99.662

HORIZONTAL

FREQUENCY(kHz)

VERTICAL

FREQUENCY(Hz)

SVGA 800x600@120Hz 76.302 119.97

SVGA 832x624@75Hz 49.725 74.551

XGA 1024x768@60Hz 48.363 60.004

XGA 1024x768@70Hz 56.476 70.069

XGA 1024x768@75Hz 60.023 75.029

XGA 1024x768@100Hz 81.577 99.972

XGA 1024x768@120Hz 97.551 119.989

WXGA+ 1440x900@60Hz 55.935 59.887

SXGA 1280x1024@60Hz 63.981 60.02

SXGA 1280x1024@75Hz 79.975 75.025

HD 1280x720@50HZ 37.071 49.827

HD 1280x720@60HZ 45 60

HD 1280x1080@60Hz 67.173 59.976

Full HD 1920x1080@60Hz 67.5 60

Full HD 1920x1080@100Hz 113.21 99.93

Full HD 1920x1080@120Hz 137.26 119.982

Full HD 1920x1080@165Hz 158.1 165

25

CQ27G2

STANDARD RESOLUTION

VGA 640x480@60Hz 31.469 59.940

VGA 640x480@72Hz 37.861 72.809

VGA 640x480@75Hz 37.500 75.00

SVGA 800x600@56Hz 35.156 56.250

SVGA 800x600@60Hz 37.879 60.317

SVGA 800x600@72Hz 48.077 72.188

SVGA 800x600@75Hz 46.875 75.000

XGA 1024x768@60Hz 48.363 60.004

XGA 1024x768@70Hz 56.476 70.069

XGA 1024x768@75Hz 60.023 75.029

SXGA 1280x1024@60Hz 63.981 60.020

SXGA 1280x1024@75Hz 79.976 75.025

WXGA+ 1440x900@60Hz 55.935 59.887

WXGA+ 1440x900@60Hz 55.469 59.901

WSXGA 1680x1050@60Hz 65.290 59.954

HORIZONTAL

FREQUENCY(kHz)

VERTICAL

FREQUENCY(Hz)

WSXGA 1680x1050@60Hz 64.674 59.883

FHD 1920x1080@60Hz 67.500 60.000

QHD for HDMI,DP 2560x1440@60Hz 88.787 59.951

QHD for HDMI,DP 2560x1440@75Hz 111.028 74.968

QHD for HDMI,DP 2560x1440@144Hz 222.056 143.952

IBM MODES

DOS 640x350@70Hz 31.469 70.087

DOS 720x400@70Hz 31.469 70.087

MAC MODES

VGA 640x480@67Hz 35.000 66.667

SVGA 832x624@75Hz 49.725 74.551

XGA 1024x768@75Hz 60.241 74.927

26

Pin Assignments

19-Pin Color Display Signal Cable

Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name

1. TMDS Data 2+ 9. TMDS Data 0- 17. DDC/CEC Ground

2. TMDS Data 2 Shield 10. TMDS Clock + 18. +5V Power

3. TMDS Data 2- 11. TMDS Clock Shield 19. Hot Plug Detect

4. TMDS Data 1+ 12. TMDS Clock-

5. TMDS Data 1Shield 13. CEC

6. TMDS Data 1- 14. Reserved (N.C. on device)

7. TMDS Data 0+ 15. SCL

8. TMDS Data 0 Shield 16. SDA

20-Pin Color Display Signal Cable

Pin No. Signal Name Pin No. Signal Name

1 ML_Lane 3 (n) 11 GND

2 GND 12 ML_Lane 0 (p)

3 ML_Lane 3 (p) 13 CONFIG1

4 ML_Lane 2 (n) 14 CONFIG2

5 GND 15 AUX_CH(p)

6 ML_Lane 2 (p) 16 GND

7 ML_Lane 1 (n) 17 AUX_CH(n)

8 GND 18 Hot Plug Detect

9 ML_Lane 1 (p) 19 Return DP_PWR

10 ML_Lane 0 (n) 20 DP_PWR

27

15-Pin Color Display Signal Cable

Pin No. Signal Name Pin No. Signal Name

1 Video-Red 9 +5V

2 Video-Green 10 Ground

3 Video-Blue 11 N.C.

4 N.C. 12 DDC-Serial data

5 Detect Cable 13 H-sync

6 GND-R 14 V-sync

7 GND-G 15 DDC-Serial clock

8 GND-B

28

Plug and Play

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor

to inform the host system of its identity and, depending on the level of DDC used, communicate additional information

about its display capabilities.

The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the

DDC2B channel.

29