Aobaisen Electronic Technology A4000 D2 User Manual
Model: A4000-D2
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
GoPlus Cam App
GoPlus Cam App
Press the Up Button to turn on the Wi-Fi*
Once downloaded, open the GoPlus Cam App on your
smartphone or tablet and let the fun begin.
(Back)
Light Indic ator
Shut ter/OK
But ton
Up
Down
*Press Up Button to Turn OFF Wi-Fi.
The GoPlus Cam App is compatible with smartphones and
tablets listed below:
Video Resolution: 1080PFHD/720P/VGA
Exposure:+ -2.0/+ -1.7/+ -1.3/+ -1.0/+ -0.7/+ -0.3/0
Cyclic Record: OFF/1min/2min/3min/4min/5min/10min
Video Lapse: OFF/1s/2s/5s/10s/30s/60s
Record Audio: OFF/ON
Date Stamp: OFF/ON
Image Size: 12M/10M/8M/5M/2M
Capture Mode: Single/3s/5s/10s/20s
Frequency: 50Hz/60Hz
Language: English/Traditional Chinese/Simplified Chinese/
Japanese/French/German/Korean/Italian/Portuguese/Russian/Spanish
Date/Time: YY/MM/DD
Car Mode: OFF/ON
Turn the Action Camera ON and repeatedly press the
Turn the Action Camera ON and repeatedly press the
Turn the Action Camera ON and repeatedly press the
Power/Mode Button to cycle through the camera mode
Power/Mode Button to cycle through the camera mode
Power/Mode Button to cycle through the camera mode
settings. they will appear in this order: Video, Playback, and
settings. they will appear in this order: Video, Playback, and
settings. they will appear in this order: Video, Playback, and
Settings.
Settings.
Settings.
Select Video Lapse time(1s,2s,5s,10s,30s,60s) in setting menu.
Press the Power/Mode button to cycle through to video Mode.
Press the Shutter Button to start the video lapse (Note: The
lapse time will show on the screen while recording).
Select Capture Mode time(3s,5s,10s,20s) in setting menu.
Press the Power/Mode button to cycle through to Photo Mode.
Press the Shutter Button to start the Capture Mode (Note: The
Capture Mode time will show on the screen).
Turn the camera ON using the Power Button. The camera will
start in Video Mode. Press the Power/Mode Button to cycle
through to Playback Mode. Select either the video or photo icon
from the menu screen and use the arrows to select image or
video. once selected, press OK to start or stop playback. To
return to main menu, press Power Button.
Turn the camera ON using the Power Button. The camera will
start in Video Mode. Press the Power/Mode Button to cycle
through to Setting Mode. Press the UP/DOWN buttons to make
selections. Press OK to confirm the selection. Press
Power/Mode button to exit.
Loading...