Anzacare Wireless Body Fluid Detecting Alarm
- Users Guide
Revision 1.0
20 July 2006
South Pacific Electronic Design Associates. P.O.Box 20253, Christchurch, New Zealand
PHONE +64(3)3488076, FAX +64(3) 3488077, EMAIL info@speda.co.nz, WEB www.speda.co.nz
Instruction for Safe Operation
1. RANGE OF ENVIRONMENT CONDITIONS
This product is designed to be safe under the following environmental conditions:
q Indoor Use
q Altitude up to 2000m
q Temperature of 5°C to 40°C
q Maximum relative humidity 80%
2.
This symbol is marked on the equipment when it is necessary for the
user to refer to the manual for important safety information.
3.
This symbol denotes a potential hazard. Attention must be given to
the statement to prevent damage, destruction or harm.
NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
⇒ Reorient or relocate the receiving antenna.
⇒ Increase the separation between the equipment and receiver.
⇒ Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
South Pacific Electronic Design Associates Limited 2006 Revision 1.0
VS Anzacare Wireless Body Fluid Detecting Alarm - Users Guide Page 2 of 5