ANYMODE EBHF002KXX User Manual
ANYMODE
SOUNDWEAR
SonicBlock
Bluetooth Speaker
USER’S MANUAL
To ensure a safe and correct use of the product, please this Manual carefully before use.
How to Use
Turn ON/OFF the Power
‐ Press and hold the power button for two seconds or more. Then, the red LED on the
product blinks and the product is powered on with the following voice message: “Power
ON”
‐ Press and hold the power button for two seconds or more when the product power is on.
Then, the red LED on the product blin ks a nd the product is powered off wit h the
following voice message: “Power OFF”
Bluetooth Pairing
‐ For 15 seconds after the power is turned on, the speaker searches for paired products
while the blue LED is blinking. If there is no pa ire d product, the blue LED blinks rapidly
and the speaker goes to the pairing standby mode with the following voice message:
Ready to pair. Please connect with Phone or Computer. Go to Phone or Computer
Bluetooth Menu.
‐ Select “SonicBlock” from Bluetooth devices displayed on your smart phone, and your
phone is paired to SonicBlock with the following message: “Pairing Complete”
‐ When the pairing is completed, the blue LED bli nks every 4 seconds.
‐ If there is a smart phone that has already been paired, the product is automatically
connected to the smart phone with the following voice message: “Phone 1 Connected”
‐ For new pairing, press and hold the Play button and the product goes to the pairing mode.
Playing Music
‐ You can play music either at your smart phone or by pressing the Play button on
SonicBlock.
‐ Press and release “+” or “ -” button, and you can raise or lowe r t he v o l ume.
‐ Press and hold “+” or “-” button, and you can play the next or the previous music.
‐ If you press the Play button on Son icBlock wh ile musi c is b eing play ed , th e music pauses.
In order to resume playing, press the Play button again.
Line-in Function
‐ With the Line-in port, you can play music with a device that does not have Bluetooth.
‐ When the Aux cable is connected to the Line-in port, the po we r is automatically turned
on regardless whether the Power button is pressed or not, and thus power is consumed.
Charging
‐ If you hear “Battery is Low” message, you have to charge the product immediately.
When the product does not work normally
‐ You can reset the product by pressing the reset hole on the back of the product, using a
sharp tool.
Product Components
SonicBlock Body
Micro USB Cable
AUX Cable
User’s Manual
* The product composition is subject to change without notice.
Product Specification
Product Name Soundwear
SonicBlock
Operating Frequency 20Hz ~ 20,000 Hz Communication
Speaker Output Full range 3W + 3W
(Stereo)
Bluetooth Profile A2DP, AVRCP Charging Time 3 hours
Battery Life Standby: 100 hours
Operating: 10 hours
(Set to 70% of
maximum volume)
Product Size 185.25 x 62.35 x
65mm
Bluetooth
Version
Distance
External Input Micro USB / Line-in
Battery Input Port 1,100mAh Li-Polymer
Micro USB, Line-in
Product Weight 377g
V3.0
10m
Loading...