Anybus AWB2000, AWB2010, AWB2020, Wireless Bolt User guide
Anybus®Wireless Bolt
USER MANUAL
SCM-1202-007 2.0 ENGLISH
™
Important User Information
Liability
Every care has been taken in the preparation of this document. Please inform HMS Industrial Networks AB of any
inaccuracies or omissions. The data and illustrations found in this document are not binding. We, HMS Industrial
Networks AB, reserve the right to modify our products in line with our policy of continuous product development.
The information in this document is subject to change without notice and should not be considered as a commitment by HMS Industrial Networks AB. HMS Industrial Networks AB assumes no responsibility for any errors that
may appear in this document.
There are many applications of this product. Those responsible for the use of this device must ensure that all the
necessary steps have been taken to verify that the applications meet all performance and safety requirements including any applicable laws, regulations, codes, and standards.
HMS Industrial Networks AB will under no circumstances assume liability or responsibility for any problems that
may arise as a result from the use of undocumented features, timing, or functional side effects found outside the
documented scope of this product. The effects caused by any direct or indirect use of such aspects of the product
are undefined, and may include e.g. compatibility issues and stability issues.
The examples and illustrations in this document are included solely for illustrative purposes. Because of the many
variables and requirements associated with any particular implementation, HMS Industrial Networks AB cannot assume responsibility for actual use based on these examples and illustrations.
Intellectual Property Rights
HMS Industrial Networks AB has intellectual property rights relating to technology embodied in the product described in this document. These intellectual property rights may include patents and pending patent applications in
the USA and other countries.
Anybus®Wireless Bolt™User Manual SCM-1202-007 2.0
Table of Contents
Page
1 Preface ............................................................................................................................... 3
1.1 About This Document .....................................................................................................3
1.2 Related Documents .......................................................................................................3
1.3 Document history...........................................................................................................3
1.4 Trademark Information ...................................................................................................3
1.5 Conventions ..................................................................................................................4
2 Product Description ....................................................................................................... 5
3 Installation ........................................................................................................................ 6
3.1 General Information .......................................................................................................6
3.2 Mechanical Installation ...................................................................................................7
3.3 Connector .....................................................................................................................8
3.4 Cabling .........................................................................................................................9
4 Configuration ................................................................................................................. 10
4.1 General....................................................................................................................... 10
4.2 Web Interface .............................................................................................................. 11
4.3 Factory Restore ........................................................................................................... 22
4.4 RESET Button .............................................................................................................23
4.5 Configuration Examples ............................................................................................... 24
A Wireless Technology Basics ......................................................................................27
B Technical Data................................................................................................................ 28
B.1 Technical Specifications ............................................................................................... 28
B.2 Internal Antenna Characteristics ................................................................................... 29
Anybus®Wireless Bolt™User Manual SCM-1202-007 2.0
This page intentionally left blank
Preface 3 (30)
1 Preface
1.1 About This Document
This manual describes how to install and configure Anybus Wireless Bolt.
For additional related documentation and file downloads, please visit the Anybus support website at www.anybus.com/support.
1.2 Related Documents
Document Author Document ID
Anybus Wireless Bolt Installation Guide HMS SCM-1202-006 (SP2139)
Anybus Wireless Bolt AT Commands Reference HMS SCM-1202-004
1.3 Document history
Version Date Description
1.0 2016-09-15 First release
1.1 2016-11-23 Minor additions and updates
1.2 2017-12-14 Added configuration example
2.0 2017-04-19 Updated for SP1
1.4 Trademark Information
Anybus®is a registered trademark and Wireless Bolt™is a trademark of HMS Industrial Networks AB. All other trademarks mentioned in this document are the property of their respective
holders.
Anybus®Wireless Bolt™User Manual SCM-1202-007 2.0
Preface 4 (30)
1.5 Conventions
Ordered lists are used for instructions that must be carried out in sequence:
1. First do this
2. Then do this
Unordered (bulleted) lists are used for:
• Itemized information
• Instructions that can be carried out in any order
...and for action-result type instructions:
► This action...
➨ leads to this result
Bold typeface indicates interactive parts such as connectors and switches on the hardware, or
menus and buttons in a graphical user interface.
Monospaced text is used to indicate program code and other
kinds of data input/output such as configuration scripts.
This is a cross-reference within this document: Conventions, p. 4
This is an external link (URL): www.hms-networks.com
This is additional information which may facilitate installation and/or operation.
This instruction must be followed to avoid a risk of reduced functionality and/or
damage to the equipment, or to avoid a network security risk.
Caution
This instruction must be followed to avoid a risk of personal injury.
WARNING
This instruction must be followed to avoid a risk of death or serious injury.
Anybus®Wireless Bolt™User Manual SCM-1202-007 2.0
Product Description 5 (30)
2 Product Description
Anybus Wireless Bolt provides wireless communication over WLAN and/or Bluetooth®to wired
networks.
Typical applications for Anybus Wireless Bolt include:
• Adding wireless cloud connectivity to industrial devices
• Accessing devices from a laptop, smartphone or tablet
• Ethernet cable replacement between devices
Limitations:
Bluetooth PAN (Personal Area Network) may not work with some devices due to different implementations of Bluetooth by different manufacturers.
WLAN 5 GHz cannot be used at the same time as WLAN 2.4 GHz or Bluetooth.
WLAN or Bluetooth?
Choose WLAN when data throughput and seamless roaming are most important and there are
few other radio emitting devices in the environment.
Choose Bluetooth if connection robustness and low latency are most important, and in environments with many other radio emitters.
Anybus®Wireless Bolt™User Manual SCM-1202-007 2.0
Installation 6 (30)
3 Installation
Caution
This equipment emits RF energy in the ISM (Industrial, Scientific, Medical) band.
Make sure that all medical devices used in proximity to this device meet
appropriate susceptibility specifications for this type of RF energy.
This product is recommended for use in both industrial and domestic environments.
For industrial environments it is mandatory to use the functional earth connection
to comply with immunity requirements. For domestic environments the functional
earth must be omitted if a shielded Ethernet cable is used, in order to meet
emission requirements.
This product contains parts that can be damaged by electrostatic discharge (ESD).
Use ESD protective measures to avoid equipment damage.
3.1 General Information
Make sure that you have all the necessary information about the capabilities and restrictions of
your local network environment before installation.
The characteristics of the internal antenna should be considered when choosing the placement
and orientation of the unit.
See Technical Data, p. 28 for details about the antenna characteristics.
For optimal reception, wireless devices require a zone between them clear of objects that could
otherwise obstruct or reflect the signal. A minimum distance of 50 cm between the devices
should also be observed to avoid interference.
See also Wireless Technology Basics, p. 27.
Anybus®Wireless Bolt™User Manual SCM-1202-007 2.0
Installation 7 (30)
3.2 Mechanical Installation
Anybus Wireless Bolt is intended to be mounted on top of a machine or cabinet through an M50
(50.5 mm) hole using the included sealing ring and nut.
Tightening torque: 5 Nm ±10 %
Make sure that the sealing ring is correctly placed in the circular groove in the top
part of the housing before tightening the nut.
Fig. 1 Installation drawing
All measurements are in mm.
Anybus®Wireless Bolt™User Manual SCM-1202-007 2.0
Installation 8 (30)
3.3 Connector
The 18-pin connector is common for all models of the Anybus Wireless Bolt. Some pins may
have a different function depending on model. Unused pins should not be connected.
Fig. 2 Connector
The location of the RESET button can be used as a reference for the pin numbering when the
connector is attached to the Wireless Bolt. Pin 1 will be the pin closest to the button.
Pin Name
1 VIN
2 GND Power Ground
3 DI
DI_GND Digital input ground
4
ETN_RD+ Ethernet receive + (white/orange)
5
ETN_RD- Ethernet receive - (orange)
6
ETN_TD- Ethernet transmit - (green)
7
ETN_TD+ Ethernet transmit + (white/green)
8
RS485_B
9
10 FE/Shield
RS232_TXD
11
RS485_A/RS232_RXD
12
RS232_RTS RS-232 Request To Send
13
RS232_CTS
14
ISO_5V
15
ISO_GND
16
CAN_L
17
CAN_H CAN High
18
Description
Power + (9–30 V)
Digital input + (9–30 V)
RS-485 B Line
Ethernet:
Serial:
RS-232 Transmit
RS-485 A Line / RS-232 Receive
RS-232 Clear To Send
Isolated 5 V for serial interface
Isolated Ground for serial interface
CAN Low
Functional Earth
Functional Earth and Shield
Note:
• The Ethernet wire colors refer to the T568A standard.
• If using a shielded Ethernet cable the shield must be unconnected.
• RS-232 and RS-485 cannot be used at the same time.
• Use termination for RS-485 and CAN when required.
Anybus®Wireless Bolt™User Manual SCM-1202-007 2.0
Loading...