Anvil America HDE7136R00 Installation Manual

INSTALLATION, OPERATION AND CARE OF :

L2

L1

120V 60Hz

GND

WIRING DIAGRAM

MODEL : HEATED COUNTER TOP DISPLAY CABINET 120V 60Hz

MODEL CODE :

HDE7136R00

HDE7148R00

HDE7160R00

M1

M2

S1

L1

L10

H1

H2

T2

120V

12V

JC631

R2

R1

76

5

4

3

2

1

TR1

ft 90

C

120V

T1

12V

REV - 10/11/2008

DATE

SIGN

DIR

PROD ELEC

DWG ADMIN

DEPARTMENT

r

HEATED COUNTER TOP DISPLAY CABINETS
MODELS HDE7136R00, HDE7148R00, HDE7160R00

Page 1

Page 6

UNPACKING: Unpack the product and check for any damage incurred during
transit. This should be reported to the responsible carrier, railway or postal
authority, and a request for a damage report should be made

THESE INSTRUCTIONS MUST BE FOLLOWED FOR US
TO GUARANTEE OUR FULL SUPPORT OF YOUR CLAIM
FOR PROTECTING AGAINST LOSS FROM CONCEALED

!



DAMAGE. THE FORM FOR FILING SUCH A CLAIM WILL
BE PROVIDED BY THE CARRIER.

GENERAL INSTALLATION AND OPERATION INSTRUCTIONS:

The ANVIL heated display cabinets are designed for illuminated display of food
products. The are designed to operate between 104-158 °F.

1. The unit can be either placed on a suitable work surface or it can be tted into a

countertop. Remember to install the unit in the most convenient location for
care of cleaning, maintenance and point of sale display.

2. If the unit is to be tted into a countertop please ensure that the cut out details

below are observed. It is essential that good ventilation is maintained by
ensuring that the cut out details are STRICTLY adhered to.

3. Assemble the shelving system and rear doors.

4. Remove all the protective lm from exposed stainless steel parts and surfaces.

5. The unit is designed for food display. Clean carefully before using by following

the specic cleaning instructions detailed later in this manual.

6. Plug the unit into a suitable power source as detailed later in this manual.
SPECIFIC INSTRUCTIONS HEATED MODELS

1. The unit is provided with an illuminated main switch. Operation of this switch
turns on the unit and allows set up of the temperature.

2. Set the desired operating temperature on the digital controller. Specic setting

instructions are detailed later in this manual.

3. The interior lights can be operated by using the lighting button located on the
digital control.