Anvil America FFA 7010 Installation Manual

INSTRUCTION MANUAL

COUNTERTOP DEEP FAT FRYERS

MODEL FFA 7010/FFA 8010
MODEL FFA 7110/FFA 8110
MODEL FFA 7020/FFA 8020
MODEL FFA 7120/FFA 8120

15LB COUNTERTOP FRYER ELECTRIC

MODEL FFA 8015

INSTALLATION, OPERATION AND CARE OF

FFA7010 /FFA7110 /FFA7020 /FFA7120 MEDIUM DUTY FRYERS

FFA8010 /FFA8110 /FFA8020 /FFA8120 MEDIUM DUTY FRYERS
FFA8015 5.6KW DEEP FAT FRYER

___________________________________________________________________

THIS INSTRUCTION BOOKLET COVERS THE ENTIRE
RANGE OF DEEP FAT FRYERS. PLEASE ENSURE THAT
YOU CHECK THE MODEL NO. AT THE REAR OF THE UNIT
AND FOLLOW THE SPECIFIC INSTRUCTIONS
PERTAINING TO THE RELEVANT PRODUCT.

UNPACKING: Unpack the product and check for any damage incurred during transit. This
should be reported to the responsible carrier, railway or postal authority, and a request for a
damage report should be made.

THESE INSTRUCTIONS MUST BE FOLLOWED FOR US TO
GUARANTEE OUR FULL SUPPORT OF YOUR CLAIM FOR
PROTECTING AGAINST LOSS FROM CONCEALED
DAMAGE. THE FORM FOR FILING SUCH A CLAIM WILL BE
PROVIDED BY THE CARRIER.

GENERAL INSTALLATION AND OPERATING INSTRUCTIONS:

1. Install the fryer in the most convenient location for ease of cleaning, maintenance and
general operation. If this appliance is to be positioned in close proximity to a wall,
partitions, kitchen furniture, decorative finishes, etc. it is recommended that they be made
of non-combustible material. If not, they shall be clad with a suitable non-combustible
heat insulating material, and the closest attention be paid to fire prevention regulations.

2. Fill the tank insert with the correct volume of cooking oil. Ensure that the oil level is at the
engraved “L” marking on the element cover. Do not overfill unit.

3. These electrical appliances are capable of performing all deep-frying applications. The

IT IS ESSENTIAL TO MAKE SURE THAT THE INCOMING
VOLTAGE IS THE SAME AS THE RATED VOLTAGE OF THE
UNIT AS FOUND ON THE SERIAL PLATE.

temperature is thermostatically controlled between the range of 150°F to 370°F.

4. The thermostat also acts as the "ON" and "OFF" switch. A signal lamp adjacent to the
thermostat indicates when the heating elements are energized.

5. The element boxes of the unit are hinged for eas e of cleaning and draining oil tank as
shown below.

OUTLINE SKETCH OF ELEMENT BOX OF DEEP FAT FRYERS
SHOWING THE HINGING OF THE ELEMENT BOX IN VARIOUS
POSITIONS:

SPECIFIC OPERATIONAL HINTS FOR THE VARIOUS
MODELS:

FFA 7010/ FF8010/ FFA7110/ FFA8110/ FFA7020/ FFA8020/ FFA7120/ 8120 – MEDIUM
DUTY FRYERS

1. Anvil deep fat fryers are medium duty electrical appliances capable of performing all
deep frying applications.

2. Each pan holds 10lbs of oil.

3. These units are fitted with a manual, over-temperature protection safety thermostat.

4. A micro switch ensures that all power to the element is di sc onnect ed when element box
is removed from the oil tank.

FFA8015 – 5.6kW FAT FRYER

1. This unit is capable of holding 15lbs of oil.

2. The electrical connection required is a dedicated single-phas e socket to fit a NEMA 6-30
plug.

DESCRIPTION OF MODELS:

MODEL

NO. OF

PANS

FFA7010 Single
FFA7110 Single
FFA7020 Double
FFA7120 Double
FFA8010 Single
FFA8110 Single
FFA8020 Double
FFA8120 Double
FFA8015 Single

VOLTAGE

(V/Hz)

POWER

(Watts)

BASKETS

INCLUDED

IN EACH

WELL(PAN)

120/60 1800 One Basket
120/60 1800 Two Baskets
120/60 2x1800 Two Baskets
120/60 2x1800 One Basket
220/60 2500 One Basket
220/60 2500 Two Baskets
220/60 2x2500 Two Baskets
220/60 2x2500 One Basket
220/60 5600 One Basket

PLUG

TYPE

NEMA 5-15P
NEMA 5-15P
NEMA 5-15P
NEMA 5-15P
NEMA 6-15P
NEMA 6-15P
NEMA 6-15P
NEMA 6-15P
NEMA 6-30P

CLEANING AND DRAINING: