AntRouter R1-LTC User Manual
R1-LTC
Bitcoin and Litecoin
Litecoin
Litecoin
Light on when powered on , blinks at a frequency of
about one minute per second when mining.
aother
2017.04.27
R1-LTC
R1-LTC
Litecoin
LITECOINS
100V-220V
0.2A
802.11b/g
2.4G
54M
5.0V
Litecoin
Litecoin
AntPool mode
1.29M/S
About 50°C （In 28 °C environment, the
shell slightly hot, but it’s a normal
working condition ）
Litecoin AntPool Miner
Antrouter R1-LTC was designed to mine in Antpool. Your reward depends on the ratio of
R1-LTC’s hashrate to Antpool’s total hashrate.
First go to www.antpool.com and scroll to “Start mining”. Enter your User ID and password
for Bitmain.com to log into Antpool. Select Litecoin at the upper left of the page. Go to the
Settings tab and add a Sub-Account via the button on the right. Then go to the upper right
part of the screen to “Current sub account” and use the arrow to select the new sub account.
Go to the Worker tab and add the worker ID. Then power on the R1-LTC and find the Wi-Fi
access point named “Antrouter” in the wireless access list on your computer. Connect to it
and open the management page in your browser with the URL “192.168.200.1”.
The default login credentials are username “root” and password “root”.
Go to Miner>>R1-LTC Configuration and enter the worker ID that you created in Antpool.
Click “Save and Apply”. In a few moments, you will see your worker hashing in Antpool.
litecoin
R1-LTC
R1-LTC
R1-LTC
R1-LTC
R1-LTC
Recipient: Bitmain After-Sale Service
Cellphone: 133-1291-9190
Address: NO 20，Yumin Road, Shajing, Baoan District, Shenzhen City, Guangdong
Province, China
FCC&CE
FCC&CE
FCC&CE
FCC&CE
FCC&CE
Loading...