Page 1
Approved Copy
n
a
b
r
r
r
k
p
r
y
t
A7595-0395 Rev A
DA-F636 Sht 1 of 1
QR-VBG
This special Anton/Bauer® Gold Mount® bracket allows you to use your existing Logic
®
®
Series
One World. One Smart Choice®
Use of unauthorized equipment in conjunction with Anton/Bauer products constitutes misuse under our warranties and may limit o
void those warranties. Anton/Bauer does not authorize, condone, recommend, or otherwise assume any liability or responsibilit
resulting from the use of any battery, charger, or accessory made by Anton/Bauer with any battery, charger, or accessory no
manufactured, produced or sold by Anton/Bauer unless otherwise indicated.
World Headquarters 14 Progress Drive, Shelton, CT 06484 U.S.A. Tel (203) 929-1100 [email protected]
Europe
Eurode Business Center, Eurode-Park 1-2, 6461KB Kerkrade, The Netherlands Tel +31 45-5639220 [email protected]
Singapore
6 New Industrial Road, #02-02 Hoe Huat Ind. Bld., Singapore 536199 Tel +65 62975784 [email protected]
Panasonic® is a trademark or registered trademark of Panasonic registered in the US or other countries.
RedRock® is a trademark or registered trademark of RedRock registered in the US or other countries.
Cinevate® is a trademark or registered trademark of Cinevate registered in the US or other countries.
Shape® is a trademark or registered trademark of Shape registered in the US or other countries.
Zacuto® is a trademark or registered trademark of Zacuto registered in the US or other countries.
All brands, trademarks, and registered trademarks are the property of their respective holders.
batteries to power any Panasonic® camera that is compatible with the Panasonic
model VWVBG series batteries. An internal DC to DC converter automatically brings dow
the voltage of a 14.4 volt battery to 7.2 volts in order to power the camera. Simply snap
attery onto the Gold Mount adapter and plug the power cord into the camera. The bracket’s
on-board PowerTap
Ultralight 2, or any other piece of equipment that may be powered by a 12 VDC (11-17VDC)
DC source (50 watts maximum). The small size of DIONIC
allows you to carry them in the supplied pouch on your belt for comfort and ease. Any othe
Anton/Bauer battery can be used on this mount, however, due to size; they cannot fit into the
pouch.
The QR-VBG can be mounted to various third party shoulder support systems such as
®
Redrock
mounting hole pattern in their design. This c an be ach ieved by removin g the sheet metal bac
plate on the QR-VBG and then using the existing four (4) screws to attach the QR-VBG to
the shoulder support system.
*If attaching to a RedRock Microsystems cheese plate you may need one (1) back
5115-0405), and four (4) screws (P/N 6120-5522).
®
also provides an additional 14.4 VDC nominal auxiliary DC output fo
Micro*, Cinevate®, Shape®, Zacuto®, and others that incorporate the Anton/Baue
www.antonbauer.com
Installation Instructions
®
90, or HyTRON® 50 batteries
late (P/N
7595-0395 Rev A
Loading...