Anthony Gallo A'Diva Ti User Manual [en, es]

CChhaattsswwoorrtthh,, CCAA 9911331111 UUSSAA

Adiva Ti

ANTHONY GALLO

ACOUSTICS

Owner’s Manual

Fill Out Warranty Information on back, detach and

return to us for your five year product warranty.

AAnntthhoonnyy GGaalllloo AAccoouussttiiccss

2200884411 PPrraaiirriiee SSttrreeeett

ANTHONY GALLO

ACOUSTICS

Stamp

Here

Place

To find a dealer near you, please visit our web site at: www.anthonygalloacoustics.com

Anthony Gallo Acoustics, 20841 Prairie Street, Chatsworth, CA 91311 USA

Phone [phone] • Fax [phone]

WWAARRNNIINNGG

c

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO WATER OR
MOISTURE. ALSO, DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD
RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS
INSIDE. REFER SERVICING

TO MANUFACTURER.

m

CCAAUUTTIIOONN

c

CCAAUUTTIIOONN:

UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT,
PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
MANUFACTURER.

c

:

TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS

This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude
to cause electric shockl. Therefor, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the userthat important literature concerning the operation and maintenance of this unit has
been included. Therefore, it should be read carefully in order to avoid any problems.

m

m

Excellent Very Good Good Fair Poor

Magazine Web Dealer Other

Name: Adiva Ti Serial #

Address:

City: State: Zip:

Telephone: Email:

Where did you first hear about the Adiva Ti ?

Very Somewhat Not At All

How influential was your dealer in your decision to purchase the Adiva Ti ?

Stereo Home Theatre

Appearance

Build Quality

Size

What type of system did you purchase?

What’s the dealers name and address you purchased this Product from ?

What other Speakers did you listen to before choosing the Adiva Ti ?

Ease of Set Up

Sound Quality

Mounting Options

Match my decor

Owners Manual

Introduction

Welcome to Anthony Gallo Acoustics!

Thank you for choosing us! The A'Diva Ti was designed along the lines of our original Nucleus Micro
speakers, but thanks to its slightly larger size can be used without a subwoofer. Another distinct
advantage of this model is the high frequency capabilities of our new paper-damped Titanium drivers. The
spherical enclosure is ideally suited to perform in locations that would hinder most conventional designs
and their refined and natural sound will complement music, home theater, and multi-room systems.

Please take a moment to review the information in this manual so you can properly install your new
speakers. If you have any questions about this or any other Anthony Gallo Acoustics' product, please call
us at [phone] or send us an e-mail at: [e-mail] As one of our valued customers
your feedback is always welcome.

We think you'll be delighted at how easy it is to connect your A'Diva Ti Speakers, and how amazing the
sound quality will be. So read on, and let's get you started.

About your Nucleus Speaker "Break In"

20

Your new A'Diva Ti speakers will need a little time to develop their full sound potential. You'll hear a
marked increase in bass and treble response after about 50 hours of use.

Speaker Placement Tips

The A'Diva Ti isn't very placement sensitive, but to achieve maximum bass it should be situated near a
wall or large surface. We highly recommend using one of our various brackets or stands to successfully
integrate them into your system.

You can place them at any reasonable height, just make sure the speakers are aimed directly into the
prime listening location.

Since the A'Diva Ti is magnetically shielded it may be placed right next to a CRT-type television without
affecting its picture.

1

Getting Connected

PPrroocceeddiimmiieennttoo ddee sseerrvviicciioo ppaarraa ttooddooss llooss pprroodduuccttooss ddee AAnntthhoonnyy GGaalllloo AAccoouussttiiccss ((AAGGAA)

)

Hooking Up Your Adiva Ti Speakers

PLEASE NOTE: Turn your sound system off before proceeding with the installation of your new speakers.
The A'Diva Ti's speaker connectors accept bare wire ends, small spades or banana plugs (make sure the
wire nuts are completely tightened when using these. Failure to do so can exert excess stress on the
shafts causing breakage).

As you hook-up the wires make sure the (+& -) speaker connections on your receiver/amplifier, satellites
and subwoofer are properly oriented. In other words, confirm that ALL of your speaker connections are
positive-to-positive (red-to-red) and negative-to-negative (black-to-black). Even one flip-flop may result in
lower bass output or compromised stereo imaging.

Standard Stereo System Set-Up

Run the desired length of speaker wire from your receiver/amplifier's Left & Right speaker connectors to
the A'Diva Ti’s connectors. They have a 50 watt rating in this configuration. (For the best results we offer
100’ rolls of 18 gauge solid-core, oxygen-free copper wire as an accessory)

Stereo System Set-Up with a Gallo MPC-1 Passive Subwoofer

QQuuéé hhaacceerr ssii uunn pprroodduuccttoo AAGGAAnneecceessiittaa rreeppaarraacciióónn:

1. Póngase en contacto con el vendedor autorizado de productos AGA al cual le haya comprado
originalmente el producto. Puede resultar conveniente tener a mano la factura de compra original para
determinar la validez de la garantía. Averigüe cómo puede ayudarle el vendedor si necesita solucionar
algún problema relacionado con el producto o si necesita reparación u otro servicio.

2. Si es poco práctico o imposible comunicarse con el vendedor original, consulte la sección de búsqueda
de vendedores autorizados Dealer Locator en www.roundsound.com. Ubique al vendedor autorizado más
cercano y contáctelo para hacer los arreglos necesarios a efectos de obtener el servicio.

3. Si lo prefiere, puede enviar el producto al Servicio de fábrica de AGA. Embale el producto
cuidadosamente en la caja original y envíelo al centro de servicio. Puede ser necesario enviar una copia
de la factura para determinar si la garantía sigue siendo válida. Llame al centro de servicio al +1 (800)
459-4183 para obtener un número de autorización de devolución (Return Authorization Number, RA#),
describa el problema e informe la dirección a la que deberá devolverse el producto y un número de
teléfono al que se pueda llamar en horas del día. Se sugiere que elija un transportista que ofrezca
servicios de seguimiento de los envíos (parcel tracking) y seguro.

El privilegio de la garantía se pierde comprando productos AGA a través de minoristas no autorizados,
canales de ventas por Internet y por catálogo.

:

Run the cables from your receiver/amplifiers Left and Right speaker connectors to the "In" connectors of
the MPC-1’s Crossover Module….inserting the red bananas at the MPC-1 end. Next, run the speaker
wires from Left & Right "High Pass" jacks of the MPC-1’s Module to the A'Diva Ti’s on the Left & Right (the
black bananas go to the MPC-1). Run the supplied Left & Right jumper cables (The ones with 1/4-inch
male phone jacks) from the MPC-1 Module's “Subwoofer Out” jacks to the corresponding input jacks on
the MPS-B subwoofer bottom.

2 19