Anthony Swingline3, SWINGLINE User Manual

STANDARD FEATURES:

• 2-Pane Normal Temperature Door

• 3-Pane Low Temperature Door

• Tempered Safety Glass

• Full-Flanged or Continuous Frame
Design Available

• 3 Finishes: Polished Aluminum,
Black, Gold Anodized

• Field Reversible Door

• Standard Front-Mount Handle

• One Piece Snap-In Door Gasket

• Continuous, Full-Perimeter Magnetic
Door Gasket

• Heavy-Duty Welded Corners

• 90-Degree Door Stop

• Self-Closing, One-Step Adjustable­Tension Doors

• Top Door Hold-Open

• Efficient Door and Frame Heater
Design

• Pre-wired Ballast, Lights, Door and
Frame Heaters

• Standard T-8 Lighting System

• Easy-to-install 4-Post Shelving
Design with Levelers

• 5 Epoxy-Coated 27” Deep Shelves
per Opening (6 on 80” door)

#

All NT glass packs meet or exceed
EISA requirements

NORMAL TEMP • LOW TEMP

STANDARD DOOR SIZES:

23 x 63
23 x 72
26 x 63
26 x 72
30 x 63
30 x 66
30 x 72
30 x 80

WALK-IN DOOR SIZES:

30 x 80
36 x 80

GLASS OPTIONS:

1/3 - 2/3
Full Glass
Full Panel

OPTIONS:

• OptiMax2 LED Lighting System

• PowerLens2 Lighting System:
Easy Accessible Ballast-in-the­Mullion Design

• Gravity Flow Shelving System ­24”–72” Deep, White or Black

• Full Length Handle

• Factory-installed Electronic Locks

• Factory-installed Cylinder Locks

• Low E Glass

• Heated Glass for High Humidity
Areas

• Factory-installed Door Guards

• Factory-installed Push Bars

• Factory-installed Kick Plates

ACCESSORIES:

• 27”, 36” Deep Shelving

• Roll-A-Way Deli Carts

• Roll-A-Way Beverage Carts

• Deli Racks

• Baskets

• Tape

ESTIMATED

SHIPPING

Doors 23”* 26”* 30”*

1 2’ 1-1/16” 2’ 3-3/4” 2’ 7-3/4”

2 4’ 3/4” 4’ 6-1/8” 5’ 2-1/8”

3 6’ 1/2” 6’ 8-9/16” 7’ 8-9/16”

4 8’ 3/16” 8’ 10-15/16” 10’ 2-15/16”

WEIGHTS

Size 2-Pane 3-Pane

2363 155 lbs. 175 lbs.

2372 179 lbs. 209 lbs.

2663 164 lbs. 184 lbs.

2672 174 lbs. 194 lbs.

3063 184 lbs. 204 lbs.

3066 184 lbs. 208 lbs.

3072 187 lbs. 214 lbs.

3080 196 lbs. 224 lbs.

*The above weights (in pounds)
are estimates only. They are on
a per opening basis which
includes doors, frames, shelves,
and shelving hardware. If you
need to estimate weight in
kilograms, simply divide the
weight in pounds by 2.2046.

5 9’ 11-15/16” 11’ 1-3/8” 12’ 9-3/8”

6 12’ 2-9/16” 13’ 6-11/16” 15’ 6-11/16”

7 14’ 2-5/16” 15’ 9-1/8” 18’ 1-1/8”

8 16’ 2” 17’ 11-1/2” 20’ 7-1/2”

9 18’ 1-3/4” 20’ 1-15/16” 23’ 1-15/16”

10 20’ 1-7/16” 22’ 4-5/16” 25’ 8-5/16”

11 22’ 4-1/8” 24’ 9-11/16” 28’ 5-11/16”

12 24’ 3-13/16” 27’ 1/16” 31’ 1/16”

13 26’ 3-9/16” 29’ 2-1/2” 33’ 6-1/2”

14 28’ 3-1/4” 31’ 4-7/8” 36’ 7/8”

15 30’ 3” 33’ 7-5/16” 38’ 7-5/16”

16 32’ 5-5/8” 36’ 5/8” 41’ 4-5/8”

17 34’ 5-3/8” 38’ 3-1/16” 43’ 11-1/16”

18 36’ 5-1/16” 40’ 5-7/16” 46’ 5-7/16”

19 38’ 4-13/16” 42’ 7-7/8” 48’ 11-7/8”
20 40’ 4-1/2” 44’ 10-1/4” 51’ 6-1/4”

Actual Net Opening Heights are 64-13/16", 73-3/4" and 81-3/4".
*Actual Door Widths are 23-1/4" , 25-15/16" and 29-15/16".
Actual Door Heights are 63-1/16", 72" and 80".

Cut Flange line ups available. Consult Factory for Net Openings.

12391 Montero Avenue • Sylmar, CA 91342

800-772-0900 • Canada 800-336-8825 • Fax: [phone]

www.anthonydoors.com

1/09