ANTEX 690-SD User Manual

690-SD SOLDERING STATION

The 690-SD is a multiprogramme, digital read-out, static dissipative temperature
controlled soldering station and comprises:

• 690-SD Static dissipative soldering unit

• SD50 Static dissipative temperature controlled soldering iron

• ST6 Bench stand

Built to meet US MIL Std2000A and EN 100015-1, the temperature range is 65 to 450°
C and repeatability to 2° C. Programme selection and settings are made using three
buttons. Each station is shipped with easy to use multi-lingual instructions. The digital
read-out displays the following:

• 2 memory settings

• Centigrade or Fahrenheit

• Dial-in bit selection for accurate offset

• Lockable with PIN security

• Choice of language

• Basic diagnostics

660TC SOLDERING STATION

The 660TC unit incorporates:

• 660TC Soldering unit

• TC50 Temperature controlled soldering iron

• ST6 Bench stand

The unit designed for wall or bench mounting, has a temperature range of 65 to 450°
C, selected using the thumbwheel potentiometer. Indicator LED's show "power-on" and
"power to iron". The TC50 included is an ergonomically designed 50 watt cool handled
soldering iron which will take any of the ANTEX 1100 series of soldering bits or DST
range of SMT desoldering bits. The TC25, a 25 watt iron can be used an option where
finer soldering and a low wattage are required.

Specification 660TC 690-SD

Input voltages availabl e 230, 100/115 230, 100/115
Output to iron 24V, 50W 24V, 50W
Element construction Wound Ceramic
Sensor type Thermocouple PTCR
Tip to earth continuity Yes Yes

Maximum leakage current

(uA)
Accuracy +/- 5% +/- 5° C
Bit type fitted 1100 1100
Unit lead length 1.5m PVC 1.5m PVC
Iron lead length 1.2m silicone 1.2m silicone
Mains plug BP, EP or ot er h BP, EP or other

2.0 1.5

SURFACE MOUNT REWORK KIT

The Antex surface mount rework station is an entry level station which gives
the user the ability to remove most component types without damage to the
circuit board or surrounding components. Each rework tool is heated to the
exact temperature required by the component by means of a microprocessor
control inside the soldering station.

• A COST EFFECTIVE SOLUTION TO DESOLDERING SMT

COMPONENTS

• MOST PACKAGE SIZES AVAILABLE

• 12 DESOLDERING TOOLS INCLUDED WITH THE KIT

• 50 WATT ESD SAFE SOLDERING IRON AND STATION

• ALSO INCLUDES SOLDERING IRON STAND AND REWORK

TOOL HOLDER.

• MANY OTHER PACKAGE SIZES AVAILABLE INCLUDING

PLCC18 - 68

Reference Package Kit

DST-A 1206 / 1210 Included
DST-B 1812 Included
DST-C 0805 Included
DST-D MELF, SOD 80 / 87 Included
DST-E SOT23 / 143 Included
DST-F SOT89 Included
DST-G IC S08 Included
DST-H IC SO14 / 16 / QFP 10x5mm Included
DST-K various + re-soldering Included

1107 various + re-soldering Included
DST-Q ICS020 / QFP 15x8mm Included
DST-S IC S028 / QFP 20x8mm Included