Antelope Audio Satori Owner`s manual
Owner’s Manual
1
Contents
1. Safety Notes 5
2. Introduction 6
3. Features 7
4. Installation Guide 8
5. Front Panel Explained 9
6. Rear Panel Explained 10
7. Software Control Panel 12
8. Advanced User Tips 15
8.1. Ground Loop Hum and Noise 15
9. Additional Information 15
10. In The Box 15
11. Technical Specications 15
12. Antelope Audio Support Resources 16
3
1. Safety Notes
To reduce the risk of electrical shocks, re, and related hazards:
● Do not remove screws, cover, or cabinet. There are no user serviceable parts inside.
Refer servicing to qualied service personnel.
● Do not expose this device to rain, moisture or spillover of liquid of any kind.
● Should any form of liquid or a foreign object enter the device, do not use it. Switch off
the device and then unplug it from the power source. Do not operate the device again
until the foreign object is removed or the liquid has completely dried and its residues fully
cleaned up. If in doubt, please consult the manufacturer.
● Do not handle the power cables with wet hands!
● Make sure the device is switched off when plugging/unplugging it to/from the power
source.
● Avoid placing things on the cabinet or using the device in a narrow and poorly
ventilated place which could affect its operation or the operation of other closely located
components.
● If anything goes wrong, turn off the device rst and then unplug the power. Do not
attempt to repair the device yourself: consult authorized service personnel or your dealer.
● Do not install near any heat sources such as radiators, stoves, or other apparatus
(including ampliers) that produce heat.
● Do not use harsh chemicals to clean your unit. Clean only with specialized cleaners for
electronics equipment.
● Connect all your devices before powering your unit.
● Your unit should always be un-racked when travelling or in a ight case
● The device is designed to operate in a temperate environment, with a correct Operating
Temperature of:
0-50 °C, 32-122 °F
5
2. Introduction
Thank you for purchasing the Satori from Antelope Audio.
Studio quality and functionality in a sleek 1Unit rack
Satori is a digitally controlled, true analog monitoring and summing system designed for today’s
studios. Antelope Orion32 and Zen Studio interfaces have both been praised for their digital clarity,
while maintaining the realism of analog sound. Satori features the same high level of uncompromising
sound quality thanks to advanced analog circuit design.
The vast assortment of I/O includes: 8 stereo inputs, 4 stereo speaker outputs, a subwoofer output,
4 independent headphone outs, 4 stereo summing inputs and software-driven talkback capability as
well as rear panel talkback jack mic input and front panel built-in mic.
A user-friendly control application for Mac OS and Windows allows for advanced remote control of
the device and also offers recallable user presets.
Satori is a perfect companion to our very popular Orion32 AD/DA interface and would compliment
any mixing or mastering studio, from an expanding home setup to a state-of-the-art recording facility
that demands the highest level of monitoring quality today’s technology can offer.
For further information, you can also visit our support area online for the FAQ, Help Desk and to
register your product at: www.antelopeaudio.com
Enjoy working with the new Satori!
All the best,
The Antelope Team
6
3. Features
● A complete palette of inputs and outputs
● Precise stepped relay volume control
● Four independent headphone outputs with dedicated volume controls
● Analog Summing allowing easy mixing
● Extremely exible routing
● Analog sound with digital control
● A user friendly desktop application available for both Windows and OS X
7
Loading...