Antaira LNP-0500G-bt-24, LNP-0500G-bt-24-T User manual

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-bt-24 Series User Manual V1.0

i

LNP-0500G-bt-24 Series

5-Port Industrial Gigabit IEEE 802.3bt PoE++ Unmanaged Ethernet

Switch, with 4*10/100/1000Tx (90W/Port) and 1*10/100/1000Tx;

12~55VDC Power Input

User Manual

Version 1.0

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-bt-24 Series User Manual V1.0

ii

© Copyright 2020 Antaira Technologies, LLC

All Rights Reserved
This document contains information, which is protected by copyright. Reproduction, adaptation or translation

without prior permission is prohibited, except as allowed under the copyright laws.

Trademark Information

Antaira is a registered trademark of Antaira Technologies, LLC, Microsoft Windows and the Windows logo are the
trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. WMM and WPA are the
registered trademarks of Wi-Fi Alliance. All other brand and product names are trademarks or registered
trademarks of their respective owners.

Notice: Copyrights © 2020 by Antaira Technologies, LLC. All rights reserved. Reproduction, adaptation, or
translation without prior permission of Antaira Technologies, LLC is prohibited, except as allowed under the
copyright laws.

Disclaimer

Antaira Technologies, LLC provides this manual without warranty of any kind, expressed or implied, including but
not limited to the implied warranties of merchantability and fitness for a particular purpose. Antaira Technologies,
LLC may make improvements and/or changes to the product and/or specifications of the product described in this
manual, without prior notice. Antaira Technologies, LLC will not be liable for any technical inaccuracies or
typographical errors found in this guide. Changes are periodically made to the information contained herein and
will be incorporated into later versions of the manual. The information contained is subject to change without prior
notice.

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-bt-24 Series User Manual V1.0

iii

FCC Notice

This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy. It may cause
harmful interference to radio communications if the equipment is not installed and used in accordance with the
instructions. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's
authority to operate the equipment.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.

Industrial Ethernet Switches

Industrial Grade Unmanaged Ethernet Switches

User Manual
Version 1.0 (June 2020)

This manual supports the following models:

• LNP-0500G-bt-24

• LNP-0500G-bt-24-T

This document is the current official release manual. Please check our website (www.antaira.com) for any
updated manual or contact us by e-mail ([e-mail]).

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-bt-24 Series User Manual V1.0

iv

Table of Contents

1. Overview .............................................................. 1

1.1 Key Features ................................................ 1

1.2 Package Contents......................................... 2

1.3 Safety Precaution.......................................... 2

2. Hardware Description ......................................... 3

2.1 Physical Dimensions ..................................... 3

2.2 Front Panel ................................................... 4

2.3 Top View ....................................................... 4

2.4 LED Indicators .............................................. 5

2.5 Dip Switch ..................................................... 6

2.6 Ethernet Ports ............................................... 6

2.7 Cabling ......................................................... 8

2.8 Wiring the Power Inputs ................................ 8

2.9 Wiring the Fault Alarm Contact ..................... 9

3. Mounting Installation ........................................ 10

3.1 DIN-Rail Mounting....................................... 10

3.2 Wall Mounting ............................................. 12

4. Hardware Installation ........................................ 13

4.1 Installation Steps ........................................ 13

5. Trouble Shooting .............................................. 14

6. Technical Specifications .................................. 15

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-bt-24 Series User Manual V1.0

1

1. Overview

Antaira Technologies’ LNP-0500G-bt-24 series is an industrial gigabit PoE++ unmanaged

Ethernet switch featuring 4*10/100/1000Tx PoE RJ45 ports and 1*10/100/1000Tx RJ45 port. Each
PoE Ethernet port supports an IEEE 802.3bt with high power PoE++ output up to 90W per port,
making it ideal for applications that demand a high power PoE power source within any harsh or
outdoor environment.

The LNP-0500G-bt-24 series is IP30 rated and DIN-rail mountable with two wide operating
temperature models to support either a standard temperature range (STD: -10°C to 65°C), or an
extended temperature range (EOT: -40°C to 75°C); as well as high EFT and ESD protection to
prevent any unregulated voltage.

This product series provides a reliable hardened Ethernet connection with PoE functions for any
outdoor or harsh industrial application environments, such as, security surveillance, ITS-traffic
monitoring systems, oil/gas and mining, facility management for power/utility, water wastewater
treatment plants, and lastly, automated production lines in factory automation.

1.1 Key Features

◼ System Interface/Performance

• All RJ45 ports support the auto MDI/MDI-X function

• Embedded 4*10/100/1000Tx (PSE: 90W/Port) and 1*10/100/1000Tx

• Store-and-forward switching architecture

• 8K MAC address table

• Jumbo Frame Support up to 10.0K

• Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC

◼ Power Input

• DC 12~55V redundant power, with a 6-pin removal terminal block

◼ Operating Temperature

• Standard operating temperature model: -10°C ~ 65°C

• Extended operating temperature model (–T): -40°C ~ 75°C

◼ Case/Installation

• IP30 protection

• DIN-Rail and wall mount design

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-bt-24 Series User Manual V1.0

2

1.2 Package Contents

➢ 1 - LNP-0500G-bt-24(-T)
➢ 1 - Quick Installation Guide
➢ 2 - Wall mounting brackets and screws
➢ 1 - DC cable –18 AWG & DC jack 5.5x2.1mm

1.3 Safety Precaution

Attention: If the DC voltage is supplied by an external circuit, please use a protection

device on the power supply input. The industrial Ethernet switch’s hardware

specs, ports, cabling information, and wiring installation will be described
within this user manual.