Ansen Electronics Co R088G2 Users Manual

Bluetooth Stereo Speaker (Powerball x 2) User Manual

Play from a Bluetooth device

Note: The effective operation range between the speaker and your Bluetooth device is
approximately 10 meters (33 feet) line of sight maximum

- Pull out the front cover from the speakers

- Connect two speakers with the provided cable below:

micro USB plug Ù master unit

3.5mm audio plug Ù slave unit

- Slide the Power [ON/OFF] switch to “ON” to turn on the master speaker

- The blue LED indicator will flash

- Activate the Bluetooth function in your Bluetooth device

- Select “PowerBallX2” on your Bluetooth device for pairing

- When connected, the blue LED indicator stays steadily on

- Start music play on your Bluetooth device

- Adjust volume on your Bluetooth device or press the [+] or [-] button on the speaker

- To next song/ To Previous song, please press [>>l] / [l<<] for 2 seconds

- Press [Play/Pause] button on the speaker to play or pause music

- Slide the Power [ON/OFF] switch to “OFF” when the speaker is not in use for power saving

Play from an external device

- Pull out the front cover from the speaker

- Connect two speakers with the provided cable below:

micro USB plug Ù master unit

3.5mm audio plug Ù slave unit

- Slide the Power [ON/OFF] switch to “ON” to turn on the master speaker

- Connect your master speaker with an external device through a 3.5mm cable (not

supplied)

- Start music play on your device

- Slide the Power [ON/OFF] switch to “OFF” when the speaker is not in use for power saving

Power Supply

The speaker operates on built-in rechargeable battery

To recharge the built-in battery, connect micro USB socket with PC through supplied USB
cable
Charging: Red LED indicator turns on

Fully Charged: The red LED turns green when it is fully charged

(Low battery: Red LED indicator flashes)