Ansell Lighting ASULED/2/CW, ASULED/1/WW, ASULED/1/CW, ASULED/2/WW Installation Instructions

Description – Asuri Post Top

® Installation Instructions

Luminaire Code(s) – ASULED

General Installation Instructions
These instructions should be read carefully prior to any installation and retained after completion for further
reference and maintenance. Please give these instructions to the building owner/occupier after installation.

Important Safety

1. Before installation or maintenance or, ensure that the mains supply to the luminaire is switched off and the circuit supply fuses are

removed or the circuit breaker is turned off.

2. It is recommended that only a qualified electrical contractor carries out the installation of this luminaire and that the luminaire is
installed in compliance with the current edition of the IEE Wiring Regulations.

3. The person carrying out the installation is to check and verify that the total load on the circuit, including that of this luminaire does
not exceed the rating of the circuit cable, fuse or circuit breaker.

4. Where applicable, careful consideration should be taken during installation to ensure that all fixings and/or suspensions are of a
suitable size for the luminaire being installed.

Ratings

1. All luminaires are manufactured & tested in compliance with the requirement contained within BS EN 60598 and are CE marked.

2. All luminaires that are of Class 1 construction and that are marked accordingly, MUST be earthed.

3. All luminaires are designed to operate at 230Volts AC -6%/+10% = 216Volts to 252Volts. Do not operate outside these voltages.

4. All luminaires are only suitable for applications within their rated Ingress Protection limits as stated.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------­Maintenance:

1. This luminaire contains no serviceable parts.

Maintenance:

1. This luminaire contains no serviceable parts.

Blue / Black

Brown / Red

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------­Ansell Lighting Products, Unit 6B, Stonecross Ind. Park, Yew Tree Way, Warrington, WA3 3JD www.anselluk.com

Issue 1.0

Disposal of Electronic Equipment WEEE Directive 2002/96/EC

This product falls within the scope of the Waste Electrical & Electronic Equipment Directive
(WEEE), which means the product should not be disposed of as normal household waste.
Ensure that this luminaire and lamp is disposed of in accordance with the WEEE Directive.
Contact a local Council Waste Dept. Local Amenity Site, or the Environment Agency for
further information. RoHS - All components and materials used in this product are RoHS
2002/95/EC compliant.

Installation

• Loosen the four stainless steel grub screw on the collar of the luminaire.

• Terminate the supply cable into the IP66 connector, ensuring correct polarity is observed and the

luminaire is earthed.

• Place the lantern top onto the lamp post and secure by tightening the stainless steel grub screws

• Restore power supply, switch on and test for satisfactory operation.

IP66