ANPOSI GC767378 User Manual

Wireless video Doorbell

(Outdoor-bell)

(Indoor-monitor)

Notice proceeding

Please use our products before, take care to use the manual, according to
our provide the information and way that you will install & use our products.

*Our products have defend to plunge function , but the products will be plunged big range that will be mangled permanence still.
*The batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
*Attention should be drawn to the environmental aspects of battery disposal. Don't throw used batteries in dustbin.
Please contact your retailer in order to protect the environment.
*Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
*Our product are high-tech production, please take care to defend rain , damp proof, thunder.
*Don't disconnect by yourself.

Keys introduction

Power ON/OFF

CH

Channel
Modulation button

Channel
indicator LED

Lum
adjustment

Power ON/OFF

Turn on/Turn off

Lum adjustment

Adjustment of picture from brighter to dark or dark to brighter.

Frequency Modulation button

Adjustment of frequency from Ch1to Ch4.

CH1 CH2

(Channel of Indoor unit must complete same as one of Outdoor unit)

CH3

CH4

Keys introduction

Installation

40mm

Call
Button

Installation

Positioning

38-50

0.5m

About 145cm

Channel
Button

P205

1 2 3 4

CH 1 CH 2

CH 3 CH 4

1 2 3 4

CH 1 CH 2

CH 3 CH 4

About 80cm

2m

* The picture quality is clear in the distance of 0.5~2m.
*Out door camera should be installed under a weather
sheild such as eave.

About 180cm

About 65cm

About 110cm

Installation

Specifications

Model M724D
Supply Voltage DC12V , 350mA Ripple: <80mVp-p
Consumption Current 220mA 80mA
Operation Temperature -10 ~+50
Operation Humidity 85%(Max)
Number of dots(Hxv) 480(H)*240(V)dot
Active area 72.0(H)*50.544(V)mm
Screen size 2.36inch(Diagonal)
Dot pitch 0.150(H)*0.216(V)mm
Color Arrangement RGB.delta
Receiving frequency
Receiving sensitivity
Video System PAL/NTSC
External Dimension 102(L) 71(W) 25(H)mm

Anti-loose gaskets

ISM2,400MHz~2,483MHz
<= -85dBm

SCREW

Magic
stickers

*Before installing ,pls test Indoor unit in order to adjust
the best effect for channel ( Channel of Indoor unit must
complete same as one of Outdoor unit)

Operation

Operation

Adjustable camera

1 2 3 4

CH 1 CH 2

CH 3 CH 4

Front
view

*Customer can adjust the camera to any angle in allowed scope.
*Finished the installation, outdoor unit is power offer when unused , power on

when pressed the calling button ,then power off automatic within 42 seconds.

Specifications

Out door camera

Model P205
Power Consumption
Imagery Angle

Operating Frequency 2414MHz; 2432MHz; 2450MHz; 2468MHz
Operation Temperature

External Dimension

Working:<350mA

Diagonal:about 50

-10 C ~+40 C

94(L) 58 (W) 21(H)mm

SHENZHEN ANTAI ELECTRONIC FACTORY

ADD:3-4/F,Block B, Zhuangbian park ,hezhou, xixiang,Baoan, shenzhen, China.

TEL:[phone] FAX:[phone]

Press the button to adjust the angle
of camera.

To adjust the you wanted direction of
the camera when press the button.

Overlooking
persepective

Bottom
view

Adapter

Manufacturers

Output

Model

Input

*When open or close the battery box ,
please press the calling button .

Left and right side view

GOSPELL DIGITAL TECHNOLOGY CO.LTD

GP006CE

100-240V ~ 50/60Hz 0.5A

12V 350mA 4.2VA

Warning:

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible
for compliance will void the user’s authority to operate the equipment. Any change to the
equipment will void FCC grant.

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

--Consult the dealer or an experienced radio/TV technician for help.

The equipment compliance with FCC radiation exposure limit set forth for
uncontrolled Environment.