Anova Pro Quick Start Guide
3
2
GET STARTED
1
fill a pot or container with at least 2.5" (63mm) of
water, or above the Minimum Water Level Line on
your Anova Precision® Cooker Pro, and place it on a
heat-safe surface or trivet, away from counter edges
2
attach your Anova Precision® Cooker Pro to the
pot by adjusting the rear screw
3
adjust the height of Anova Precision® Cooker Pro
by adjusting the side screw
4
plug in your Anova Precision® Cooker Pro, then
start cooking by following the steps on the next page
(do not overtighten screws)
(do not overtighten screws)
Cord + Plug
4
Rear Screw
Side Screw
3
Maximum Water
2
Level Line
1
Minimum Water
Level Line
5
4
Wi-Fi Connection
(lit when connected)
Current
Temperature
Target
Temperature
Timer
Start/Stop
Set Time/Temp
led indicator modes
The LED light on the front
of the device indicates the
status of the cooker with
dierent colors:
White: idle
Pulsing Blue: preheating
Solid Blue: cooking
Red: low water or error
USING THE DISPLAY
starting your cook and setting the timer
• Set or change desired temperature by pressing
the Target Temperature button followed by the +/buttons on your Anova Precision® Cooker Pro
• Set or change cooking time by pressing the
Timer button followed by the +/- buttons
• Press the Start button to begin cooking. Cooking
can begin with or without setting a Timer
change between fahrenheit and celsius
• Press and hold the Current Temperature button
for 3 seconds to change the unit of temperature
LED Indicator
When you are ready to cook, place your food in a
re-sealable bag, lower the bag into your pot, and
clip the bag to the side of the pot.
Loading...