Anker Innovations A3911, A3911L, A3911R user manual
Soundcore Liberty Neo
User Manual
Product Number A3911, A3911L, A3911R
Bluetooth Headphones / Soundcore Liberty Neo
5100500XXXX V01
Benutzerhandbuch | Manuel de l’utilisateur | Manuale utente
Manual de usuario | Manual do Usuário | 取扱説明書 | 사용 설명서
用户手册 | 使用者手冊 | Руководство пользователя
English 01
Deutsch 09
Español 17
Français 25
Italiano 33
Português 41
日本語
한국어
简体中文
繁體中文
Pусский
User Manual
49
57
65
73
81
89
97
L
R
1
Wearing
2
3
1. Choose the EarTips and jackets that fit your ears the best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn to lock.
If all the jackets are too large, Soundcore Liberty Neo
can be used without jackets.
Charging
Charge the charging case before using the earbuds for the first
time. Place the earbuds in the charging case before you start
charging.
Clean the charging pin on a regular basis to prevent
connection issues.
Open or close the charging case to activate the LED
battery indicator on the charging case.
Remove the film on the earbuds when taking them out
of the charging case for the first time.
< 30%
30% - 70%
> 70%
100%
< 30%
30% - 70%
100%
01 English English 02
Earbud status indicator
Flashing red (once every minute) Low battery
Steady white Charging
Off Fully charged
To preserve battery lifespan, fully charge at least
once every 45 days.
2. The earbuds switch off automatically when placed back in
the charging case. To manually switch off the earbuds, press
and hold the multifunction button on both the earbuds for 5
seconds until the LED indicator turns red.
A
Turn On / Off
1. The earbuds switch on automatically when taken out of the
charging case. To manually switch on the earbuds, press and
hold the multifunction button for 1 second until the indicator
blinks white on both earbuds.
A
Bluetooth connection (Device)
Enter pairing mode when earbuds are switched on
B
ON
Flashing white once (Earbud status indicator)
03 English English 04
1”
B
OFF
Flashing red once (Earbud status indicator)
Pairing
1
2
5”
3
Soundcore
Liberty Neo
Rapidly flashing white Pairing mode
L
R
R
1”
L
1”
L
R
L
R
R
R
1”
Slowly flashing white Connected to a device
True Wireless Stereo connection (Earbuds)
Enter True Wireless Stereo pairing mode when earbuds are
switched on.
Controls
Press Play / pause
1
Press and hold for 1 second
(The multifunction button
on the right earbud)
Press and hold for 1 second
(The multifunction button
on the left earbud)
Control volume via the
connected device
Next track
Previous track
Volume up / down
Rapidly flashing white
(Right earbud)
Flashing white (Left
earbud)
Rapidly flashing white
(Right earbud)
Slow flashing white (Left
earbud)
Slow flashing white
(Both earbuds)
05 English English 06
True Wireless Stereo is
connecting (The left earbud
is connecting to the right
earbud) but earbuds are not
connected to your device
True Wireless Stereo connection
is successful (The left earbud is
connected to the right earbud)
but earbuds are not connected to
your device
True Wireless Stereo
connection is successful (The
left earbud is connected to the
right earbud) and earbuds are
connected to your device
Press
1
Press and hold for 1 second
1”
Press (The multifunction
1
button on the right earbud)
Press and hold for 1 second
(The multifunction button
on the right earbud)
Answer / End call
Reject call
Put current call on hold
and answer incoming call
Switch between the held
call and the active call
Transfer a call between
headphones and mobile
phone
Flashing white On a call
Flashing white Incoming call
2
L
R
Double click the multifunction
button on either one of the
earbuds
Reset
1
Activate Siri / other
voice control software
3
Soundcore
Liberty Neo
4. Place the earbuds back to the charging case for resetting
(Make sure charging case still has power), take the earbuds out
of the charging case once the LED indicator on both earbuds
turns solid white. Now the left earbud will automatically
connect to the right earbud. The connection is successful if the
left earbud flashes slowly and the right earbud flashes rapidly.
If the connection was unsuccessful, place the earbuds back in
the charging case and take them out again and repeat steps
2-4 until the connection is successful.
5. Open the Bluetooth menu on your mobile device, search for
“Soundcore Liberty Neo”.
Specifications
Specifications are subject to change without notice.
2
2
Reset the earbuds if you can only hear sound on one side:
1. Open the Bluetooth list on your mobile device and delete
“Soundcore Liberty Neo”.
2. Take the earbuds out of the charging case, press and hold
the multi-function button on both earbuds for 5 seconds
until the LED indicator flashes pink, release the button when
the LED indicator turns off.
3. Press and hold the multi-function button again on both
earbuds for 8 seconds until the LED indicator flashes pink,
then release the button when the LED indicator turns off.
07 English English 08
Earbud Input Rating 5 V 0.3 A
Charging Box Input Rating 5 V 1 A
Charging time 1.5 hours
Playtime (varies by volume level
and content)
Weight (product net weight) 51 g / 1.8 oz
Impedance 16 Ω
Driver (full range) 6 mm × 2
Frequency response 20 Hz - 20 KHz
Bluetooth version V5.0
Range 10 m / 33 ft
Please note that your rights under applicable law governing
the sale of consumer goods remain unaffected by the
warranties given in this Limited Warranty.
5 hours
Loading...