ANHUI KONKA ELECTRONIC E4ST4316H user manual

43" UHD Digital LED TV
E4ST4316H
INSTRUCTION MANUAL
Please read all the instructions carefully before using this TV,
and keep the manual for future reference.
CONTENTS
Important Safety Instructions 2
Preparations 4
What's Included Front/Side View Rear View Wall Mounting Remote Control
Connecting External Devices 8
Turning On/Off Your TV Initial Setup Source Channel Selection Volume Adjustment Streaming My Media
Viewing Photos Listening to Music Watching Videos
TV Settings General
Portable remote Picture Audio Network Channel Time Lock
APP settings Support Network
Parental Control
Troubleshooting 24
FCC Notes 27
22
OTT APP Service 28
1
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions – All the safety and operating instructions should be read before this product is operated.
Keep these instructions – The safety and operating instruct ions should be retained for future reference.
Heed all warnings – All warnings on the applianc e and in the operating instructions should be adhered to.
Follow all instructions – All operating and use instructions should be followed.
Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.
Clean only with dry cloth.
Do not block any ventilation openings. Inst all in acc ordanc e with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
that
produce heat.
Do not defeat the saf ety purpose o f the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wi d e bl a d e or the third prong are provided for your safety. If the provided plug does not
into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly a t plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/acce s sories
by the manufacturer.
Use only with the cart, stand, tripo d, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Refer all servicing to qualified service personnel. Servicing is require d when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Please keep the unit in a well-ventilated environment.
WARNING: To reduce the risk of
or electric shock, do not expose this apparatus to rain or moisture. The apparatus should not b e exposed to dripping or splashing. O bjects
with liquids, such as vases should not be placed on apparatus. WARNING: The batteries shall not be exposed to excessive heat such as sunshine,
or the like. WARNI N G: The main plug i s used as disconnect device, the disconnect device shall remain readily operable. WARNIN G: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to
This lightning f lash with arrowhead symbol within an equilat eral t riangle
is intended to alert t he u s er t o the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
T he exclamation point wit hin an
equilateral triangle is intended to
alert the us er t o the presence o f important operating and maintenance instructions in the literature accompanying the appliance.
This equipment is a Class II or double
insulat ed electrical appliance. It
has been designed in such a way that it does not require a safety connection to electrical earth.
personnel.
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
Unplug this apparatus during lightning storms or when unused for long periods of time.
2
ADDITIONAL SAFETY INFORMATION
To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below.
Electrical Safety
• The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product.
• To prevent overload, do not share the same power supply socket with too many other electronic components.
• Do not place any connecting wires where they may be stepped on or tripped over.
• Do not place heavy items on them, which may damage the leads.
• Hold the main plug, not the wires, when removing from a socket.
• During a thunderstorm, or when not using the television for extended period of time,
turn off the power switch on the back of the television.
• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, such as bathrooms, steamy kitchens or near swimming pools.
• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid is spilt onto the set, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the set does not work normally.
• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty.
Qualiedpersonnelmustonlyservicethisapparatus.
• To avoid battery leakage, remove exhausted batteries from the remote control, or
when not using for long period.
• Donotbreakopenorthrowexhaustedbatteriesonare.
• Do not mix old and new batteries.
• Donot mixAlkaline,Standard(Carbon-Zinc)orRechargeable(NickelCadmium)or (NickelMetalHydride)batteries.
Physical Safety
• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, butensureatleast5cm(2'')clearanceallaround.
• Do not tap or shake the TV screen, or you may damage the internal circuits. Take
good care of the remote control.
• TocleantheTVuseasoftdrycloth.Donotusesolventsorpetroleumbaseduids.
• Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus(includingampliers)thatproduceheat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, the wide blade, or the third prong is provided for
yoursafety.Iftheprovidedplugdoesnottintoyouroutlet,consultanelectricianfor
replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs.
• Unplug the apparatus during lightning storms or when unused for long periods.
• Referall servicing to a qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Please always connect your television to a power outlet with protective ground connection.
3
PREPARATIONS
What is Included?
2
1
5
4
8
7
0
MENU
OK
RETURN EXIT
USB
VOL
REPEAT
ADD/ERASE
INFO FREEZE
CH.L IS
T P. MOD E S.MODE
V-CHI P CC
ASPE C T
SLEE P AUTO
HDMI VGA TV
3
6
9
SOURC E
CH
FAV
MTS
TV Set
E4ST4316H
43" UHD Digital LED TV
INSTRUCTION MANUAL
Please read all the instructions carefully before using this TV,
and keep the manual for future reference.
User Manual
Products Technical Assistance
Remote Control with Batteries
Quick Start Guide
4
PREPARATIONS
Front/Side View
LED
IR
O L
CHV
MEN
U S
OU R
CE
• Switch the TV between On / Standby mode.
SOURCE
Press to select among different input signal sources.
MENU
Display the OSD (on screen display) menu.
CH
Press to select a channel.
VOL +/-
Press to adjust the volume.
LED
The LED light indicates when the TV is activated.
IR
Infrared Receiver.
5
PREPARATIONS
Rear View
9
4
8
USB
OPTICAL LAN
1 2 3 5 6 74
1.Optical Output
Connect a digital sound system to this jack.
2.USB Input
Connect to a USB storage device to play photo
3. LAN
Network connection port.
4. HDMI Inputs
Connect to a input device.
5. VGA Input
Connect to a computer or other devices with a VGA interface.
Wall Mounting
The TV is provided with mounting holes for a VESA approved wall mounting bracket (Not Supplied). Remove the screws holding the base to the base bracket and lift the base away (do not remove the base mounting brackets). Mount the VESA bracket using 4*M6 isometric threaded screws (Not Supplied).
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
-Using cabinets or stands recommended by the manufacturer of the television set.
-Only using furniture that can safely support the television set.
-Ensuring the television set is not overhanging the edge of the supporting furniture.
-Not placing the television set on tall furniture(for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
-Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
-Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied.
(USB mode)
(HD) signal
Your new TV is heavy, please consult with professional wall mount installer to perform this installation.
VGA PC-AUDIO
PC-IN
6. PC Audio Input
Connect to a computer audio output.
7. Antenna Input (75Ω VHF/UHF)
Connect to the antenna (75Ω VHF/UHF) socket with the RF coaxial cable.
8. Headphone output
Connect to the Headphones.
9. COMPONENT/AV Input
Connect to AV devices with composite/ compone nt ( Y/P b/Pr ) vid eo a nd audio output sockets. COMPOSITE VIDEO and COMPONENT(Y/PB/PR) share with AUDIO IN (L/R).
WARNING
6
PREPARATIONS
Remote Control
1. :Switch the TV between On and
Standby mode.
2.
:Mute and restore TV sound.
3. 0~9:Select a program.(ATV/DTV mode)
4. —:Enter multiple program channel number
such as 2-1.
5.
:Return to the previous viewing channel.
6. APP:Press to select the desired APP.
7. MENU:Display the main menu.
8. SOURCE:Select among the different input
signal sources:TV/AV/COMPONENT/HDMI1/ HDMI2/HDMI3/VGA/USB.
9.
screen display menus and adjust the system settings to your preference.
10. OK:
11. RETURN:Return to previous menu.
12. EXIT:Exit the on screen display menu.
13. USB:Access into the USB directly.
14. VOL+/-:Adjust the volume.
15. CH :Select the channel.
16. REPEAT:Press repeatedly to select the repeat
mode.
17.
18.
chapter/track/photo.
19.
track/photo.
20.
21.
22. FREEZE:Freeze the picture.
23.
24. ADD/ERASE:Add or delete Favorite channels.
25. FAV:Display the favorite channel list.
26. INFO:Display the present screen information
such as the current channel and input source.
27. S.MODE:Select sound mode:STANDARD/ MUSIC/MOVIE/USER.
28. P.MODE:Select picture mode:/STANDARD MOVIE/USER/DYNAMIC.
29. CH.LIST:Display program list.
30. V-CHIP:Set up parental control.
31. ASPECT:Select the aspect ratio.
settings:WIDE/WIDE ZOOM/ZOOM/STANDARD/ JUST SCAN(at HDMI mode)/DOT BY DOT (at VGA mode).
32. CC:Closed Caption selection:OFF/ON/CC On Mute.
33. MTS:Switch among different audio channels:STEREO/MONO/SAP.
34. AUTO:Press to adjust the picture automatically in VGA source.
35. SLEEP:Set the TV sleep timer: OFF/5/10.../180 / 240 min.
36. TV:Press to turn to TV mode.
37. HDMI:Access into the HDMI directly.
38. VGA:Access into the VGA directly.
:Allows you to navigate the on
the selection.
:Stop the playback.
:Skip to the beginning of the previous
:Skip to the beginning of the next chapter/
:Reverse playback rapidly. :Advance playback rapidly.
:Start playback or pause.
7
CONNECTING EXTERNAL DEVICES
8
USB
OPTICAL LA N
VGA PC-AUDIO
PC-IN
CUSTOMIZING TV SETTINGS
Turning On/Off Your TV
• Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.
In Standby Mode, press the turn the TV on. The red LED indicator will turn blue.
The POWER button on the main unit or on the remote control can only switch the TV into standby. To completely turn off the TV, please disconnect the power cord from the power socket.
Initial Setup
button on the main unit or on the remote control to
Connect the power cord to the power socket
after you have completed all t he p hysica l connections. At this stage, the TV will enter Standby Mode and the red LED indicator will
illuminate.
In Standby Mode, press the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue.
the Setup Wizard. Press the Arrow buttons to highlight and select your desired mode and
press OK
button on the
9
Loading...
+ 21 hidden pages