Anhui Huami Information Technology XMSH05HM User Manual

69码商品名称SKU编码商品ID 产品型号 料号

XMSH05HM小米手环3M1 69

17

小米生态链产品包装图纸

图纸提供单位

安徽华米信息科技有限公司

项目名称

Wuhan_使用说明书_英文版

Read this manual carefully before use, and retain it for future reference

01 Product Overview

Touchscreen

Button

Fitness Tracker

Heart Rate
Monitor

Charging
Port

Wristband Charging Cable

02 Installing the Fitness Tracker

1. Insert one end of the fitness tracker into the slot from the front of the wristband.

2. Press down on the other end with your thumb to push the fitness tracker into
the slot completely.

03 Wearing the Mi Band

Tighten the wristband around your wrist until there is enough slack to fit about
one finger, then adjust the fit until you find a comfortable position.
Note: Wearing the band too loosely may impact data collection by the heart rate
monitor.

04 Pairing the Mi Band with a Smartphone

1. To download the Mi Fit app, scan the QR code below or search for "Mi Fit" on
the Mi App Store or Apple Store.

Mi Fit

QR code for the Mi Fit app
(Android 4.4/iOS 9.0 or later)

2. Open the Mi Fit app, log in to your account and select "Device Pairing", then
follow the pairing instructions to proceed. When the Mi Band starts to vibrate
and the Bluetooth pairing notification appears on the screen, press the buon
to complete the pairing process.
Note: Please make sure Bluetooth connection is activated on your mobile phone.
During the pairing process, please keep the Mi Band near your mobile phone.

Press the buon on the wristband

to confirm pairing

When the Mi Band starts to vibrate, touch the

buon on the wristband to confirm pairing.

My Mi Band did not vibrate

Note: This diagram is for reference only

05 Using the Fitness Tracker

Aer the Mi Band is paired successfully, it will begin to track and analyze your
daily activities and sleeping habits.
Press the buon to activate the display.Slide up or down on the screen to
browse your activity data, measure your heart rate, and access many other
features. Slide le or right on the screen to switch the display between different
items.

Slide up or down to switch between

different functions

Slide left/right on the screen to

switch between items

06 Removing the Fitness Tracker

Remove the wristband from your wrist, hold on to each end and pull on the
wristband until you see a small gap between the fitness tracker and the wristband.
Use your finger to pop the fitness tracker out of its slot from the front side of the
wristband.

版本号

V1.2

设计时间

2018.04.11

设计师

材质工艺要求

材质要求：

105g太空梭哑粉，印刷过哑油

07 Charging the Mi Band

Please charge your Mi Band immediately when the low power indicator is on.

08 Important Safeguards

When using the Mi Band to measure your heart rate, please keep your wrist steady.
Mi Band 3 has a water resistance rating of 5ATM. It can be worn in the shower,
swimming pool, or while swimming near the shore. It cannot be used, however,
while siing in a sauna or diving in the ocean.
Underwater operation is not supported for the Mi Band's touch-buon and
touchscreen. Aer the Mi Band has come in contact with water, please use a so
cloth to wipe away excess water from its surface before using the device.
Please keep the area between your wrist and the wristband dry during daily use,
and clean the wristband with water regularly. Please stop using the product
immediately and seek medical assistance if the contact area on your skin begins to
show signs of redness or swelling.

09 Specifications

Name: Mi Band 3
Model: XMSH05HM
Wight of the Fitness Tracker: 8.5 g
Dimensions of the Fitness Tracker: 17.9 x 46.9 x 12 mm
Wristband material: Thermoplastic elastomer
Clasp material: Aluminum alloy
Adjustable length: 155 - 216 mm
Compatible with: Android 4.4/iOS 9.0 or later
Baery capacity: 110mAh
Baery type: Li-Ion polymer baery
Input voltage: DC 5 V
Input current: 250 mA (Max)
IP rating: 5ATM
Operating temperature: -10°C ~ 50°C
Wireless connectivity: Bluetooth 4.2 BLE

Regulatory Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1 . This device may not cause harmful interference, and

2. this device must accept any interference received, including interference that
may cause undesired operation.
FCC ID: 2AC8UXMSH05HM
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.
ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.The
devicecan beusedinportable exposureconditionwithoutrestriction.
Please take aention that changes or modification not expressly approved by
the party responsible for compliance could void the user’s authority to operate
the equipment.

Disposal and Recycling Information

The sym bol signifie s that this prod uct has to be disp osed
separ ately f rom ordinar y household wa stes at its end of
life. Pl ease kindly b e aware that thi s is your respon sibility
to dispo se electro nic equipmen t at recycling c enters so as
to help co nserve nat ural resour ces.

This de vice is in comp liance with t he essent ial requirements
and other relevant provisions of Directive 2014/53/EU.

For mor e regulator y informat ion and produc t certific ation/compl iance logos
relate d to the Mi Band 3, p lease go to Mor e -> About on your Mi B and 3.

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Anhui Huami Information Technology Co., Ltd.
(a Mi Ecosystem company)
Address: Room 1201, Building A4, National Animation Industry Base, No. 800
Wangjiang West Road, Gaoxin District, Hefei, Anhui, China

For further information, please go to www.mi.com

Mi Band 3 User Manual

制作工序：

工艺要求：

折页方式：XX

印刷-连线哑油-模切-折页

色相正确、印迹牢固、

颜色及专色：

纹理要求：

套印准确、各色套印
不露杂色，套印误差≤ 0.1mm
模切走位≤±0.5mm

PANTONG Cool Gray 11C

纹理方向

选择正确的
方向图标拖
动到图纸里

比例 单位 mm1:1