Page 1
beauty reflector
ADAPTERS
INSTRUCTIONS
Page 2
Introduction
Congratulations on your purchase of an Angler Beauty Reflector Mounting
Adapter.
The Angler Beauty Reflector Mounting Adapter will allow you to mount your
Angler Beauty Reflector onto your strobe light.
The Angler Beauty Reflector reflects and diuses light to create a shadowless
eect that oers greater contrast and texture than a softbox or an umbrella.
Because beauty reflectors produce a natural-looking catchlight, they are
ideal for fashion and portrait photography.
Mounting Adapter
Catalog Number
EGD-DOL
EGD-HOL
EGD-LPS
EGD-SUR Profoto
Paul C. Buff Alien Bee, Einstein,
Elinchrom; Impact EX; Calumet
Stellar; JTL; Photoflex; Rime Lite;
Compatibility
White Lightning, and Zeus;
Balcar; Flashpoint
Genesis; Interfit EX
Impact; Bowens; Calumet
Travelite; Cowboy; Interfit
Westcot t
Page 3
Mounting adapter
User manual
HighlightsContents
Steel or aluminum construction
Mounts quickly onto the flash head
Allows use of Angler 16ʺ, 20ʺ, 22ʺ,
and 27ʺ Beauty Reflectors
EGD-DOL
EGD-LPS
All photos are for illustrative purposes only. Flash units, lamps, and lightstands are
not included with the Angler Beauty Reflector Adapter unless purchased as a kit.
EGD-HOL
EGD-SUR
Page 4
Setting up the Beauty Reflector
In order to mount your Angler Beauty Reflector, you will need to purchase and install
the proper mounting adapter.
1. Remove the
thumbscrew and
washer by rotating
the thumbscrew.
2. Slide the mounting
adapter into the
brackets on the
back of the Beauty
Reflector.
Page 5
3. Insert the
thumbscrew and
washer into the
threaded hole and
rotate clockwise to
tighten.
4. Mount the Angler
Beauty Reflector
onto your strobe
light.
Note: For instructions on how to mount your Angler Beauty Reflector, refer to your
strobe’s instruction manual.
Page 6
Specifications
EGD-DOL EGD-HOL EGD-LPS EGD-SUR
Construction
Weight
STEEL
0.5 lb.
(227 g)
Aluminum
alloy
0.3 lb.
(136 g)
Aluminum
alloy
0.4 lb.
(181 g)
STEEL
AND
RUBBER
0.65 lb.
(295 g)
Page 7
One-Year Limited Warranty
ANGLER
A Gradus Group
Brand
TM
This Angler product is warranted to the original purchaser to be free from defects in materials and
workmanship under normal consumer use for a period of one (1) year from the original purchase date
or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s
discretion, of any product that fails during normal use of this product in its intended manner and in
its intended environment. Inoperability of the product or part(s) shall be determined by the warranty
provider. If the product has been discontinued, the warranty provider reserves the right to replace it
with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you
with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Angler Customer Service Department to obtain a return
merchandise authorization (“RMA”) number, and return the defective product to Angler along with
the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own
risk and expense.
For more information or to arrange service, visit www.anglerlights.com or call Customer Service at
212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Angler is a registered trademark of the Gradus Group.
© 2015 Gradus Group LLC. All Rights Reserved.
GG1
Page 8
anglerlights.com
Loading...