Page 1
beauty reflector
EG-49 EG-53
EG-55 EG-50
INSTRUCTIONS
Page 2
Introduction
Congratulations on your purchase of the Angler Beauty Reflector!
The Angler Beauty Reflector is available in 16ʺ (EG-49), 20ʺ (EG-53), 22ʺ
(EG-55), and 27ʺ (EG-50) versions. It features a neutral white reflector
and mounts onto your strobe to reflect and diuse light. This creates a
shadowless eect that oers greater contrast and texture than a softbox or
an umbrella. Because beauty reflectors produce a natural-looking catchlight,
they are ideal for fashion and portrait photography.
Note: The Beauty Reflector requires the correct mounting adapter
(sold separately) for attachment to your strobe.
HighlightsContents
Beauty Reflector
User manual
All photos are for illustrative purposes only. Flash units, lamps, and lightstands
are not included with the Angler Beauty Reflector unless purchased as a kit.
Soft but crisp light quality
Oers contrast and texture
Natural catchlights in eyes
Combine with optional diuser sock
or honeycomb grid
Page 3
Recommended Accessories
Additional accessories are available from Angler. Mount the Angler Beauty
Reflector to your strobe with an Angler Mounting Adapter. Attach an Angler
Honeycomb Grid to change the intensity and shape of the light.
Mounting Adapter
Catalog Number
EGD-DOL
EGD-HOL
EGD-LPS
EGD-SUR Profoto
HONEYCOMB GRID
Catalog Number
EGJ-49 9031630 16
EGJ-53 9031660 20
EGJ-55 9031650 22
EGJ-50 9031670 27
Paul C. Buff Alien Bee, Einstein,
Elinchrom; Impact EX; Calumet
Stellar; JTL; Photoflex; Rime Lite;
Diffuser Stock
Catalog Number
Compatibility
White Lightning, and Zeus;
Balcar; Flashpoint
Genesis; Interfit EX
Impact; Bowens; Calumet
Travelite; Cowboy; Interfit
Westcot t
Compatibility
ʺ REFLECTOR
ʺ REFLECTOR
ʺ REFLECTOR
ʺ REFLECTOR
Page 4
Setting up the Beauty Reflector
In order to mount your Angler Beauty Reflector, you will need to purchase and install
the proper mounting adapter.
1. Remove the
thumbscrew and
washer by rotating
the thumbscrew.
2. Slide the mounting
adapter into the
brackets on the
back of the Beauty
Reflector.
Page 5
3. Insert the
thumbscrew and
washer into the
threaded hole and
rotate clockwise to
tighten.
4. Mount the Angler
Beauty Reflector
onto your strobe
light.
Note: For instructions on how to mount your Angler Beauty Reflector, refer to your
strobe’s instruction manual.
Page 6
Specifications
EG-49 EG-53 EG-55 EG-50
MATERIAL
FINISH
MOUNT
DIAMETER
DEPTH
Weight
Black exterior, neutral white interior
(requires purchase of adapter)
16ʺ
(40.6 cm)
4.5ʺ
(11.5 cm)6ʺ(15.2 cm)
1.85 lb.
(0.84 kg)
ALUMINUM
Most major brands
20ʺ
(51 cm)
2.65 lb.
(1.2 kg)
22ʺ
(56 cm)
6.5ʺ
(16.5 cm)
3.15 lb.
(1.4 kg)
27ʺ
(68.6 cm)
8.75ʺ
(22 cm)
4.8 lb.
(2.2 kg)
Page 7
One-Year Limited Warranty
ANGLER
A Gradus Group
Brand
TM
This Angler product is warranted to the original purchaser to be free from defects in materials and
workmanship under normal consumer use for a period of one (1) year from the original purchase date
or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s
discretion, of any product that fails during normal use of this product in its intended manner and in
its intended environment. Inoperability of the product or part(s) shall be determined by the warranty
provider. If the product has been discontinued, the warranty provider reserves the right to replace it
with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you
with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Angler Customer Service Department to obtain a return
merchandise authorization (“RMA”) number, and return the defective product to Angler along with
the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own
risk and expense.
For more information or to arrange service, visit www.anglerlights.com or call Customer Service at
212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Angler is a registered trademark of the Gradus Group.
© 2015 Gradus Group LLC. All Rights Reserved.
GG1
Page 8
anglerlights.com
Loading...