Angler 7262-W-36, 7262-W-60, 7262-W-18 User manual

Whitebox

INSTRUCTIONS

Introduction

Congratulations on your purchase of an Angler Whitebox Octagonal Softbox!

Angler softboxes are designed to control and soften light for your specific photographic
needs. This softbox is compatible with flash (strobe), fluorescent, and LED lighting
sources. Do not use this softbox with “hot” lights such as quartz, tungsten, or HMI
sources.

Angler octagonal softboxes come in 60-inch, 36-inch, and 18-inch sizes. The
Whiteboxes have a matte white interior finish, which softens and diuses the light. Each
softbox has a front diuser, which can be attached using touch fasteners. The diuser
can be removed to produce more intense light with increased contrast. The removable
internal bae will soften and diuse light further when installed in the softbox. A speed
ring (not included) is required to mount the softbox to a light.

The size of the softbox is related to the lighting eect produced — the larger the softbox,
the softer the light. The distance from the softbox to the object being photographed
also aects the quality of light produced — when the softbox is close to the object, the
light will be more intense, with more contrast. When the distance is greater, the light
will be more diused, with less contrast. The removable interior bae will also soften
and diuse light — you can subtract or add a degree of contrast through inserting or
removing the bae.

2

Highlights

For strobe, fluorescent, and LED lights

Matte white interior

Removable, recessed front diuser

Removable inner bae

Fits most brands of speed rings and lights

Accepts optional fabric grids

3

Contents

User Instructions

Folding the background

1. Grasp the background at two adjacent
corners. Lift the backdrop a little. The
backdrop’s own weight will assist the
folding process. Fold the two ends
together. The background will look like a

2. Pass one hand behind the other in an
overlapping motion—right hand to left
hip and vice versa.

3. Sweep the corner that is in front over the
corner closest to you.

4. Continue folding one side over the other
until both align. The background will now
fit in its carry bag.

1

2

3

4

Front diuser

Flex rods (×8)

User manual Carrying case

collapsible background

whitebox

2254-BW-57

INSTRUCTIONS

INSTRUCTIONS

Interior bae

Fabric shell

Spare flex rod (×1)

4