Anets SLG40-18 Specifications

Anets SilverLine™18Gas Fryer
Built To Anets Standards, Priced For Today’s Market
Anets provides the highest value in frying with the new SLG100 18” gas fryer. Ideal for both batch cooking and large volumes load after load. The heating system has been engineered for maximum efficiency and cleanability. To achieve optimum cooking capacity this fryer requires only 150,000 BTU input, using 4 burner tubes equipped with computer designed radiants. Higher BTUs for fast recovery and rapid oil heat up result in limited oil absorption and great tasting food. Center mounted snap action thermostat responds quickly to fry loads. The Anets SLG100 is built to perform, easy to clean and priced to purchase today.
Model SLG100
Item No.
STANDARD FEATURES
Pulse Ignitor (No electrical required)
Stainless steel front, door and trim
are standard features
150,000 BTUH from only four
tubes, easiest model on the market to clean
Computer designed radiants enable
the burners to efficiently reach 37,500 BTUH per burner tube
The unique tapered elliptical tubes
provide 14% more heat transfer area than competitive models (see Design Features on back)
Outstanding serviceability, all
components easily accessible and replaceable from the front
Stainless steel basket hanger lifts off
for easy cleaning
Food particles fall below burner
tubes into cold zone to prolong shortening life
Large 1
1
/4 ball-type full port drain
valve prevents clogging
SLG100 shown with 6” adjustable legs.
c
Anetsberger Brothers, Inc. ■Dependable Foodservice Equipment
180 North Anets Drive
1-800-837-2638
Northbrook, Illinois 60062
Fax 847-272-1943 ■www.anets.us
Anets SilverLine™18Gas Fryer
SPECIFICATIONS
Model SLG100, Stainless steel frypot
Certification ETL, cETL, ETL Sanitation
Gas Input 150,000, BTU/hr.
Gas Pressure NG 3.5WC, LP 10 WC
Gas Connection
Electrical Requirements None
Thermostat Snap action millivolt control
Temperature Range 175
Hi-Limit Safety control turns off gas supply at
Safety Pilot 100% gas shut off valve
Burners Cast iron, atmospheric pre-mix
Frypot Stainless steel
Cabinet Door, stainless steel
Shortening Capacity 70-100 lbs
Cooking Capacity 90 lbs of fries per hour
Frying Area 18x 18(46cm x 46cm)
Shipping Weight 200 lbs.
Warranty 1 year parts and labor
1
/2 NPT
O
-375OF (79O-190OC)
428OF (220OC)
Backsplash, stainless steel Basket Hanger, stainless steel
Stainless steel frypot: 5 years (pro-rated)
Model SLG100
Top View
Side View
STANDARD ACCESSORIES
2 Twin nickel plated baskets
Rack type basket support
6Adjustable legs
Drain pipe extension
Flue extension/Diverter
OPTIONS AND ACCESSORIES
Single or triple baskets
Casters
Drain Table
Fryer Cover
DESIGN FEATURES
Easier to clean
Optimum access
to cold zone
Specifications subject to change without notice. SS#566 Revised 12/05 Printed in the U.S.A. Anetsberger Brothers reserves the right to replace a SilverLine product rather than replacing a fry pot.
Anetsberger Brothers, Inc. ■Dependable Foodservice Equipment
Tapered Elliptical Shape
14% more surface
area for heat transfer
Food particles
cannot accumulate on top of tubes
180 North Anets Drive 1-800-837-2638
Fax 847-272-1943 ■www.anets.us
Front View
Northbrook, Illinois 60062
Loading...