Anets MX-7E Specifications

Anets GoldenFry™7” High Efficiency Gas Fryer
High Performance, Fast Recovery, Energy­Saving...Half the Space, Half a Fryer
When you need one more basket for shrimp, fish or onion rings but don’t have the space for a full size fryer, use the Anets Half-Fryer. Attached to a full-size fryer, it provides a very cost­efficient way to expand your offerings. Available with a fully automatic basket lift and 15 minute timer (Model MX­7A).
STANDARD FEATURES
Stainless steel frypot has a lifetime
warranty
Stainless steel front panel, trim and
door
Copper-flashed heat exchangers
transfer heat directly into frypot for maximum efficiency
Open vat design with sloped sides
forces food particles to fall into the easily accessible cold zone
Fully insulated cabinet keeps the
kitchen cool
Stainless steel basket hanger lifts off
for easy cleaning
Front 1-1/4” NPT full port drain
valve
Unit must be banked to a 14”
Anets fryer
Model MX-7E/7A
Item No.
MX-7E Shown banked with an MX-14E and optional casters
Anetsberger Brothers, Inc. ■Quality is just the beginning
180 North Anets Drive
1-800-837-2638
Northbrook, Illinois 60062-5452
Fax 847-272-1943 ■www.anets.us
Anets GoldenFry™7” High Efficiency Gas Fryer
SPECIFICATIONS
Model MX-7E, Basic
MX-7A, Fully automatic basket lift with 15 minute timer
Certification ETL, NSF, CETL
BTUH 55,000 BTU/hr.
Gas Pressure NG 3.5” WC, LP 10” WC
Gas Connection 3/4” NPT
Electrical Requirements MX-7E, 120V, 60Hz, 1Ph, 2 Amps
MX-7A, 120V, 60Hz, 1Ph, 4.5 Amps
Thermostat Electric snap action type
Temperature Range 200° to 375°F (93°-191°C)
Burners Atmospheric pre-mix
Hi-limit Safety control turns off main gas
supply at 450°F (232°C)
Safety Pilot 100% gas shut off valve
Spark Ignitor Piezo-electric
Frypot Stainless steel
Cabinet Door, stainless steel
Sides, painted Backsplash, stainless steel
Shortening Capacity 17-25 lbs
Model MX-7E/7A
Top View
Side View
STANDARD ACCESSORIES
1 Nickel plated basket
Rack type basket support
Clean out rod
6” adjustable legs
Drain pipe extension
Banked to a standard 14” Anets fryer
OPTIONS AND ACCESSORIES
Automatic basket lift (Model MX-7A) ■ Solid state thermostat
Stainless steel cabinet side ■ Electronic iginition
Built-in filter system, Filtronic II ■ Shortening melter
Casters Front drain tray
Fryer cover ■ Fryer cleaning brush
Drain table
Sediment tray
Specifications subject to change without notice. SS#110 9/08 Printed in the U.S.A.
Front View
Anetsberger Brothers, Inc. ■Quality is just the beginning
180 North Anets Drive
1-800-837-2638
Northbrook, Illinois 60062-5452
Fax 847-272-1943 ■www.anets.us
Loading...