AND EJ-27 User Manual

Only numerical data

Add S/N

before

numerical data

EJ-27 Bluetooth

Communication

Interface

for EJ

INSTRUCTION MANUAL

EJ-27 is a Bluetooth communication option. Attach to the EJ series balance.

1. Installation Procedure

Note: Before installing the EJ-27 option board,

disconnect the AC adapter from the balance.

Step1 Remove the cover of the option slot on the rear

by press and lower it.

Step2 Attach the connector in the slot to the EJ-27 unit and insert it into the slot. Step3 Secure the EJ-27 with the screws supplied

with the EJ-27.

2. Connectable device

□ Smartphone / Tablet / PC with Bluetooth

□

：Refer to 5- HID function.

□ AD8931 ：Wireless Remote Display

□

□ AD8541-PC ：Wireless Communication Interface for PC

□

(Connect to USB port of computer) Note1 Refer to the A&D website for details. Note2 Turn off DIP switch No.1 when connecting to

3. DIP switch

AD8931 or AD8541-PC. Refer to 3- DIP switch, Case 3.

DIP switch

Case

No.1 No.2

SELECT SERIAL

ON OFF

Keyboard input

No S/N

(Factory Setting)

ON ON

Keyboard input

With S/N

OFF OFF

Two-way

communication

4. Setting the balance (EJ series)

Refer to the instruction manual of the balance (EJ series), to set the functions. － Set function “bp5” to ” 0”. － Set function “btpr” to ” 0”. － Set function “prt” to ” 0”. (In case of connection to AD8931)

Connector

EJ-27

LED

DIP switch

Output Data

(No

header, no +sign and no unit

Example 1) Example 2)

(Same as case 1 if the balance has no S/N setting)

Example 1) Example 2)

1.23

－4.56

Data

12345678 1.23

901234567 －4.56

S/N Tab Data

Connect to AD8931 or AD8541-PC

)

Cover

5. HID function (HID Over GATT Profile)

□□ By turning on DIP switch No.1, you can connect to a Smartphone, tablet, or PC with Bluetooth and use a

general-purpose text application or spreadsheet software.

□□ The output data has no header (ST, WT, etc.), + sign and unit (g, kg, etc.). □□ Set the keyboard language of device to English. □□ By turning on DIP switch No.2, the output data has serial number (S/N) of balance. Refer to 3- DIP switch, Case 2.

Pairing

□□ Turn on the Bluetooth function of connection device and power on the balance. Select the “A&D_HID” device and

pair. S/N may have been added after “A&D_HID”.

□□ You will not be able to connect if more than 30 seconds have passed without pairing after selecting the device. In that case, power off the balance and try again.

6. Precautions for use

□□ Refer to the instruction manual of the connection device for the pairing. □□ The LED lights up when the wireless communication connection is completed. □□ It will connect automatically when the paired device is nearby. When connecting to other device, turn off the

unused devices or disconnect.

□□ If you can’t communicate, check that the connector is firmly connected. If it still fails, check the balance settings,

pairing and connected devices.

7. Wireless communication

□□ Bluetooth devices is EYSHCNZXZ (TAIYO YUDEN CO.,LTD.)／Bluetooth 5.0 (Bluetooth Low Energy) □□ The effective range communication is 10 m or less in an unobstructed space.

If there is an obstacle such as a wall, the range of communication will be shorter.

□□ Interference may be caused near the following devices that use the 2.4 GHz frequency band, which is the same as

for Bluetooth. Therefore, this device is not suited for uses that require reliability.

－ Wireless LAN

－ Bluetooth devices (such as mobile phones) － Home appliances such as microwave ovens

8. Compliance 8-1. Compliance with FCC Rules

This device contains transmitter module FCC ID : RYYEYSHCN This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (FCC = Federal Communications Commission in the U.S.A.)

FCC warning Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his / her own expense.

8-2. IC

IC RADIATION EXPOSURE STATEMENT FOR CANADA This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions : (1) this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device. This device contains transmitter module IC : 4389B-EYSHCN

- 2 -