Ancor Coaxial Cable Catalog Page

Coaxial Cable
Premium Tinned Copper
• Features signal loss ratios of up to 50% less than other coaxial cables
• Tinned copper center conductor as well as tinned copper outer braid for corrosion resistance and easy soldering
WIRE & CABLE
17
Spool Length Part # Nominal O.D.
RG 58CU
100' 150510
250' 150525
RG 59U
250' 151025
500' 151050
RG 213
100' 151710
250' 151725
500' 151750
RG 8X
100' 151510
250' 151525
500'
1000' 151560
151550
3/16"
4.8 mm
1/4"
6.4 mm
13/32"
10.3 mm
1/4"
6.4 mm
Wt. per
1000'
26 lbs
11.8 kg
36 lbs
16.3 kg
40 lbs
18.1 kg
110 lbs 50 kg
Related Products
Coaxial Cable Fittings
page 27
Coaxial Cable Assemblies
Premium Tinned Copper
• All assemblies come with Ancor adhesive lined heat shrink to seal out moisture,
provide strain relief and ght corrosion
• 96% Tinned copper braid for optimum protection against signal loss
• 100% Tinned copper center conductor and braid
• One end pre-assembled coaxial cable packages for RG58 and RG8X come with Ancor’s twist-on UHF plugs for easy installation
• No solder or special tools required
• Special low loss SAT NAV extensions
Wire Type RG58C/ U RG59U RG8X RG213
Insulation Material PVC* PVC PVC PVC*
Nominal O.D.
AWG 20 23 16 13
Conductor Stranding 19/33 Solid** 19/29 7/21
Braid Coverage 96% 96% 96% 96%
Wt. per 1000'
Impedance (Ohms) 50 75 50 50
Capacitance/Ft. 30.8 pF 20.5 pF 26.0 pF 30.8pF
Attenuation/100'
@50MHz 3.3db 2.4db 2.5db 1.3db @100MHz 4.9db 3.4db 3.7db 1.9db @1000MHz 21.5db 12.0db 13.5db 8.0db
Velocity of Propagation 66% 66% 78% 66%
3/16"
4.8 mm
26 lbs
11.8 kg
1/4"
6.4 mm
36 lbs
16.3 kg
1/4"
6.4 mm
40 lbs
18.1 kg
13/32"
10.3 mm
110 lbs
50 kg
* non-contaminating insulation ** copperweld
Ends Description Wire Length Part #
RG58CU Two ends assembled 3' 189800
RG8X One end assembled 50' 189849
Ancor Recommends
• RG 58CU for interconnecting electronic equipment
• RG 59U for TVs and some SAT NAVs
• RG 213 for VHF runs more than 50 feet
• RG 8X for VHF runs less than 50 feet
Loading...