AN-130+ Speaker Monitor Owners Manual
MADE IN USA
MADE IN USA
A Message from the President
Congratulations on purchasing an Anchor Audio
Speaker Monitor, the choice of thousands of satisfied
customers including the White House, prestigious
universities, school districts nationwide, police and fire
departments, and all branches of the U.S. Military. Our
products are made of the finest materials and built with
pride in the U.S.
We’ve incorporated the latest technology into your
sound system yet kept it simple to use. Just take a
few minutes to review this manual to ensure the maximum enjoyment of your Anchor
system. Or, you can view a demonstration video complete with a trouble shooting
section at www.anchoraudio.com.
Feel free to call our friendly customer support staff at 1-800-ANCHOR1
with any questions. We love to hear from our customers.
Janet Jacobs, President
on behalf of all Anchor employees
CONTENTS
GETTING STARTED .................................................................................................................. 1
BASIC SYSTEM OPERATION ..................................................................................................... 2
WIRELESS REMOTE CONTROL ................................................................................................. 3
OPERATING THE BUILT-IN UHF WIRELESS RECEIVER ................................................................. 4
OPERATING WIRELESS MICROPHONE /TRANSMITTER ............................................................... 5
IMPORTANT SAFETY INSTRUCTIONS ........................................................................................ 6
HAVING TROUBLE WITH YOU SOUND SYSTEM? / TECHNICAL SPECS ......................................... 7
SIX YEAR WARRANTY
SIX YEAR WARRANTY
GETTING STARTED
Please check your new unit carefully for any
damage which may have occurred during shipment.
Each Anchor product is carefully inspected at the
factory and packed in specially designed boxes for
safe transport.
Notify the freight carrier immediately of any damage
to the shipping box or product. Repack the unit
in the original box and wait for inspection by the
carrier’s claim agent. Notify your dealer of the
pending freight claim.
NOTE: All damage claims must be made with freight carrier!
RETURNING SYSTEMS FOR SERVICE
OR REPAIR
For service or repair, please contact the dealer
you purchased your system from, call us at 1-800262-4671, or visit www.AnchorAudio.com, Contact
Us page. Our tech support team will issue an RA
number for warranted systems, after which, you can
ship the item(s) to Anchor for repair. All shipments
to Anchor Audio must include an RA number and
must be shipped prepaid. C.O.D. shipments and
shipments without an RA number will be refused
and returned at your expense.
IMPORTANT: Save the shipping box & packing materials,
they were specially designed to ship your unit!
The AN-130+ Speaker Monitor come with a six year warranty,
the remote comes with a two year warranty, and wireless comes
with a two year warranty.
1
AN-130+ Speaker Monitor Owners Manual
MADE IN USA
BASIC SYSTEM OPERATION
The AN-130+ monitor is used to amplify the signal
from a microphone, electronic musical instrument or
line-level sources
You’ll need a connection cable and an AC outlet.
1. Place the AN-130+ in desired location
2. Set volume control on front of speaker to
minimum
3. Plug the power cord into a grounded 115 volt
outlet
(220 volt outlet for export model)
4. Plug a microphone into the MIC input jack, or an
audio source into a LINE IN jack
5. Turn the power switch on the rear panel “ON”
(red LED on front panel should light)
6. Adjust the volume, bass & treble controls to
desired levels
IMPORTANT: To avoid feedback, do not position
(MP3, iPod, CD, VCR, etc).
a microphone in front of speaker.
BACK PANEL OF AN-130F1+
LINE IN
The line-level input jacks may be used with audio sources such as computers,
iPods or portable audio players.
SIX YEAR WARRANTY
POWER SWITCH
MIC IN
An unbalanced, low impedance
microphone input is for use with the
MIC-90P or other mics that have a 1/4”
phone plug.
LINE OUT
The unbalanced Line-out provides a combined signal of all inputs being used.
You can use this function to record your presentation or to “daisy chain” another
powered sound system to the AN-130+ for greater crowd coverage.
Note:
This output is post source level; any volume fluctuations for a specific input
will affect the output signal level at this output.
POWER CORD
NOTE: SEE PAGE 4
FOR WIRELESS RECEIVER
INSTRUCTIONS
2
AN-130+ Speaker Monitor Owners Manual
WIRELESS REMOTE CONTROL
REMOTE OPERATION
(AN-130RC+ or AN-130F1RC+)
Point the red Mute button towards the front
of the AN-130RC+, aiming the remote at
the red window located near the Volume and
Tone controls.
• Raise volume by pressing Volume Up
• Lower volume by pressing Volume
Down
• Mute system by pressing Mute
• Stop mute by pressing Mute again or
pressing either volume button
MADE IN USA
SIX YEAR WARRANTY
VOLUME
DOWN
NOTE: If the system is not responding be sure the signal is not blocked.
MUTE
VOLUME UP
REPLACING THE REMOTE BATTERY
1. Locate the latch on the bottom of the
remote, near the back
2. Gently pull the latch towards the
center of the remote
3. Slide out the battery holder carefully
4. Place a new battery in holder with
positive symbol on the battery
facing up
5. Carefully re-insert the battery holder
REMOTE CONTROL
BATTERY
BOTTOM
BATTERY
HOLDER
NOTE: Use only CR2025 or CR2032 type batteries.
3