Analytic Systems IVS2500R Data Sheet

Description

The IVS2500R Series is a compact 2500VA 19” Rackmount DC/AC
pure sinewave inverter that uses established design techniques to
ensure high reliability.

Suitable for a wide range of applications, the IVS2500R features full
electronic protection, high efficiency and low output noise.

The built-in fan provides sufficient airflow for operation without
de-rating up to 50oC ambient temperature. Extended operating
temperature (-40 to +65oC) is available.

The inverter can be loaded with a fluorescent lamp load up to the
full-specified output power.

DC/AC Pure Sine
Inverters

Model
IVS2500R

Benefits

◆ Ultra-Quiet

◆ Power sensitive electronics without interference

◆ Rugged & Reliable

◆ Ensure years of safe and trouble free operation

Design Features

◆ Input is filtered to EN 55022 Class B

◆ Very low 60Hz input ripple current

◆ Modular design, light weight

◆ Sinusoidal wave shape

◆ Multiple input and output voltages available

◆ 2500VA of output power

◆ Full electronic protection

◆ Field-proven design topology

Applications

◆ Marine / Automotive / RV

◆ Electric Utilities and Substations

◆ Telecom Power Plants

◆ Manufacturing Locations

◆ Steel Mills

◆ Military Applications (COTS)

◆ Industrial Controls

◆ OEM Applications

◆ Solar / Alternative Power Systems

◆ Fuel Cells

DC/AC Pure Sinewave Inverters

IVS2500R Series19” Rackmount Pure Sinewave Inverters

Input Voltage

Input Protection ermal fuse, Inrush current limiting, Reverse polarity protection

Input Isolation

Output Voltage

Wav e F orm Sinusoidal

Total Harmonic Distortion Better than 5% at full load

Eciency Min 78% at full load

Line Regulation Maximum 0.5%

Load Regulation Maximum ± 6% from 10% load to full load

Output Protection

EMI / RFI Suppression Meets EN 55022 Class B

Load Crest Factor Maximum 3.0 at 90% load

24V, 32V, 48V, 125V, 270VDC +/-20% are standard
Other inputs available, please consult factory

Input to chassis 500VDC for <60V input – 1500VDC for >60V input
Input to output 2250VDC – Output to chassis 2250VDC

115VAC/60Hz /21.7A continuous or 220VAC / 10.9A (50 or 60Hz standard)
with grounded neutral
Isolated oating output optional (Consult factory for other voltages and frequencies)

Current limiting with short circuit protection, thermal shutdown with automatic recovery in case of continuous
overload or insucient airow

Operating Temperature Range 0o C to +50o C

Humidity 5 - 95% non-condensing

Temperature Dri 0.05% per o C over operating temperature range

Dimensions 6U” X 19” x 15” enclosed case (H x L x W)

Connections

Weight 30 lb (13.6 Kg)

Options

Safety

Note: Specifications are subject to change without notice.

Warranty: Twenty four months subject to application within good engineering practice
Enhancements to these general specifications can be accommodated upon request
Designed to meet common approval requirements. Specifications Subject to Change Without Notice
Designed and Manufactured in Canada

Input: Compression-type terminal block
Output: Standard AC receptacle

Output Fail Alarm (Form C)
Remote Inhibit: by connecting DC voltage (as specied) to the inhibit terminal

Compliance to IEC950, CSA C22.2 No. 950 and UL 1950
Please contact factory for approval status for the requested input/output conguration