Description
The IVS1000 Series is a highly compact 1000VA DC/AC pure
sinewave inverter that uses established design techniques to ensure high reliability.
DC/AC Pure Sine
Inverters
Model
IVS1000
Benefits
◆ Ultra-Quiet
◆ Power sensitive electronics without interference
◆ Rugged & Reliable
◆ Ensure years of safe and trouble free operation
Design Features
◆ Input is filtered to EN 55022 Class A
◆ Very low 60Hz input ripple current
◆ Compact size, light weight
◆ Sinusoidal wave shape
◆ Multiple input and output voltages available
◆ 1000VA of output power
◆ Full electronic protection
◆ Field-proven design topology
◆ Also available as a frequency converter with 115VAC or 230VAC
input
Suitable for a wide range of applications, the IVS1000 features
full electronic protection, high efficiency and low output noise.
The built-in fan provides sufficient airflow for operation without
de-rating up to 50oC ambient temperature. Extended operating
temperature (-40 to +65oC) is available.
The inverter can be loaded with a fluorescent lamp load up to the
full-specified output power.
Applications
◆ Marine / Automotive / RV
◆ Electric Utilities and Substations
◆ Telecom Power Plants
◆ Manufacturing Locations
◆ Steel Mills
◆ Military Applications (COTS)
◆ Industrial Controls
◆ OEM Applications
◆ Solar / Alternative Power Systems
◆ Fuel Cells
DC/AC Pure Sinewave Inverters
IVS1000
Input Voltage
Input Protection
Isolation
Output Voltage
Wav e F orm Sinusoidal
Total Harmonic Distortion Less than 5% at full load
Eciency Min 76% at full load
Line Regulation Maximum 0.5%
Load Regulation
Output Protection
Output Overvoltage Protection 140/280 V by internal supply voltage limiting
EMI Meets EN 55022 Class A as a minimum
24V, 36V, 48V, 125V, 250VDC +/-15% are standard
Other inputs available, please consult factory
ermal fuse, Inrush current limiting, Reverse polarity protection, Varistors, Lower voltage than specied input
min. will not damage unit
Input to chassis 500VDC for < 60V input, 1500VDC for > 60V input
Input to output 2250VDC, Output to chassis 2250VDC
115VAC/60Hz or 400Hz @8.7A
230VAC/50Hz @ 4.35A continuous with grounded neutral.
Isolated oating output optional (Consult factory for other voltages and frequencies)
Maximum ± 6% from 10% load to full load
± 2% load regulation option available
Current limiting with short circuit protection, thermal shutdown with automatic recovery in case of continuous
overload or insucient airow
Load Crest Factor Maximum 2.5 at 90% load
Output Noise High frequency ripple is better than 500m Vrms (20MHzBW)
Operating Temperature Range 0o C to +50o C
Humidity 5 - 95% non-condensing
Temperature Dri 0.05% per o C over operating temperature range
Cooling Build-in fan drawing air into the unit
Environmental Protection
Dimensions 7.5” x 5.3” x 15.5” (W x H x L) including terminal block and anges
Connections
Weight 13.0 lb (5.9 kg)
Safety Compliance to C22.2 No. 107.1 - 01 and UL 458 and EN60950
Options
Note: Specifications are subject to change without notice.
Designed to meet common approval requirements. Specifications Subject to Change Without Notice
Basic ruggedizing
Full ruggedizing and conformal coating as option
Input: Compression-type terminal
Output: Standard AC receptacle
Output Fail Alarm (Form C)
Remote Inhibit: By closing external contacts on the inhibit terminals
Warranty: Twenty four months subject to application within good engineering practice
Enhancements to these general specifications can be accommodated upon request
Designed and Manufactured in Canada
Loading...