Page 1
Power sensitive electronics
fe and
Marine & other Rugged Environments
Military Applications (COTS)
Charge any DC/DC System
DC Battery Charger s
BCD610 Isolated Battery Charger
• Ultra-Quiet
•
without interference
• Rugged & Reliable
• Ensure years of sa
trouble free operation
• Fast & Accurate Charging
•
• Electric Utilities and Substations
• Manufacturing Plants
• Steel Mills
•
• Industrial Controls
• OEM Applications
• Solar / Alternative Power Systems
• Fuel Cells
•
The model BCD610 DC Battery Charger charges either 12V, 24V or 48V
batteries from a 110, 220 or 300VDC power source. Other battery
voltages up to 360 volts are also available by special order.
The all-new Current Mode switching design offers increased power and
reliability in a compact package. Extra input and output filtering reduce
EMI to extremely low levels. Reliability features include an input fuse,
thermal shutdown, current limiting, reverse battery hookup protection,
output short circuit shutdown with automatic recovery, and equalize
charging cycle. The output voltage is easily adjusted 1.0 volts above or
below the standard output voltage to accommodate special charging
requirements.
Optional features include a Digital Volt/Ammeter, 3-Bank Charging, a
Remote Control Panel, and/or a second Battery Temperature Sensor.
We are confident that you will get many years of reliable service from
this DC Batter y Charger .
• Fully Isolated Design
• Adjustable output voltage for
charging standard or deep cycle
lead-acid, VRLA or Gel cell type
battery
• Transient Voltage Suppressor
• Extremely rugged and well suited
for marine and other demanding
environments
• High tolerance for shock and
vibration
• Ultra-quiet low EMI operation
• Can be left permanently connected
• Spark free connection
• User selectable 2 or 3 stage
charging profile
• Audible & visual indicators for
output overload, low input
voltage, low output voltage &
over-temperature
• Over-temperature shutdown
• Short circuit protection
• Output over-voltage crowbar
• Inrush Current Limiting with
solid state bypass
• Dry contact output fail relay
• 3 year parts and labour
warranty
Page 2
-25° to +40°C @ maximum output
(Optional -40°C extra wide-temp. operation avail.)
0 - 95°C Relative Humidity
(non-condensing) with optional conformal coating
Audible Noise
NONE Ødb @ 3 ft
Typical Service Life
> 10 yrs. (87,600 hrs)
Nominal (ip)
110 250 300
Actual (Vdc)
100-140 230-280 280-360
Input Amps (max)
8.2 3.6 2.9
Input Fuse (MDA)
10 4 3
Output Nominal (op)
12 24 48
Output Volts (DC)
13.6 ± 0.05 27.2 ± 0.05 54.4 ± 0.05
Absorption Voltage (Vdc)
14.4 28.8 57.6
Charging Amps
40 22 11
Absorption to Float
6.0 Amps 3.3 Amps 1.65 Amps
Output Adjustment (Vdc)
± 1.0 V
Output Fuses (ATC)
Battery Banks
1 or 2 (3 Bank Option Available)
Battery Size (Amp Hrs.)
160 - 240 88 - 132 44 - 66
Output Crowbar
16.0 ± 0.5V 32.0 ± 1.0V 63.9 ± 2.0V
Output Ripple & Noise
< 50 mV
Regulation (Line & Load)
< +/- 0.5%
Temperature Comp.
-30 mV/°C -60 mV/°C -120 mV/°C
Duty Cycle
Continuous 100% for 24 hours per day
Efficiency
> 75% @ Maximum Output
Stages
2 or 3 (user selectable)
Length
14.5 in / 36.8 cm
Width
Height
3.0 in / 7.6 cm
Clearance
1 inch (2.5 cm) all around
Material
Finish
Black Anodize / Powder Epoxy Coat
Fastenings
All 18-8 Stainless Steel
Weight
7.6 lb / 3.3 kg
Connections
Four contact output terminals
Warranty
3 years
Safety
Built to meet cETLus Standards
Available From:
Noise on Input
< 50 mV
40 x 2 30 x 2 15 x 2
Operating Temp.
Range
Humidity
Isolation
Derate Linearly 2.5% per °C from 40°C
Input-Case & Input-Output 1500VDC
Output-Case 500VDC (1500V @ 48V Output)
9.9 in / 25.1 cm
Marine Grade Aluminium
Loading...